Gentoo Linux ia64 Podręcznik: Instalowanie Gentoo

From Gentoo Wiki
Jump to:navigation Jump to:search
This page is a translated version of the page Handbook:IA64/Full/Installation and the translation is 100% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎polski • ‎português do Brasil • ‎русский • ‎українська • ‎中文(中国大陆)‎ • ‎日本語 • ‎한국어
Instalacja
O instalacji
Wybór medium instalacyjnego
Konfiguracja sieci
Przygotowanie dysków
Instalacja etapu 3
Instalacja systemu podstawowego
Konfiguracja jądra
Konfiguracja systemu
Instalacja narzędzi
Instalacja systemu rozruchowego
Finalizacja
Praca z Gentoo
Wstęp do Portage
Flagi USE
Funkcje portage
System initscript
Zmienne środowiskowe
Praca z Portage
Pliki i katalogi
Zmienne
Mieszanie działów oprogramowania
Dodatkowe narzędzia
Custom package repository
Funkcje zaawansowane
Konfiguracja sieci
Zaczynamy
Zaawansowana konfiguracja
Sieć modularna
Sieć bezprzewodowa
Dodawanie funkcjonalności
Dynamiczne zarządzanie


Wprowadzenie

Witaj

Przede wszystkim, witamy w Gentoo! Zamierzasz wkroczyć w świat wyboru i możliwości. Gentoo polega na wyborach. Podczas instalacji Gentoo, jest to wielokrotnie jasno przedstawione - użytkownicy mogą wybrać co ma zawierać ich kompilacja, jak zainstalować Gentoo, jakiego loggera systemowego użyć, etc.

Gentoo to szybka, nowoczesna metadystrybucja o przejrzystym i elastycznym wyglądzie. Jest zbudowany w oparciu o ekosystem wolnego oprogramowania i nic nie ukrywa przed swoimi użytkownikami. Portage, system zarządzania pakietami, z którego korzysta Gentoo, został napisany w języku Python. Oznacza to, że użytkownik może łatwo przeglądać i modyfikować kod źródłowy. System pakowania Gentoo używa kodu źródłowego (dostępne jest również wsparcie dla wstępnie skompilowanych pakietów), a konfiguracja Gentoo odbywa się za pomocą zwykłych plików tekstowych. Innymi słowy, otwartość wszędzie.

Jest to bardzo ważne, by każdy użytkownik zrozumiał, iż możliwość wyboru jest głównym czynnikiem istnienia Gentoo. Staramy się nie zmuszać użytkowników do robienia czegokolwiek, co im się nie podoba. Jeśli ktoś uważa inaczej, prosimy o zgłoszenie raportu o błędzie.

Jak zbudowana jest instalacja

Instalacja Gentoo może być przedstawiona jako 10-etapowa procedura, odpowiadająca następnym zestawom działań. Wyniki każdego działaia w danym etapie:

Etap Wynik
1 Użytkownik znajduje się w środowisku roboczym, które jest gotowe do zainstalowania Gentoo.
2 Połączenie internetowe jest gotowe do zainstalowania Gentoo.
3 Dyski twarde są przygotowane do obsługi instalacji Gentoo.
4 Środowisko instalacyjne jest przygotowane, a użytkownik jest gotowy do wykonania chroot w nowym środowisku.
5 Instalowane są podstawowe pakiety, które są takie same we wszystkich instalacjach Gentoo.
6 Jądro Linuksa jest zainstalowane.
7 Większość plików konfiguracyjnych systemu Gentoo jest utworzona.
8 Zainstalowane są niezbędne narzędzia systemowe.
9 Odpowiedni system rozruchowy został zainstalowany i skonfigurowany.
10 Świeżo zainstalowane środowisko Gentoo Linux jest gotowe do eksploracji.

Za każdym razem, gdy w podręczniku przedstawiany jest pewien wybór, staramy się wyjaśnić zalety i wady każdego wyboru. Chociaż podręcznik jest następnie kontynuowany z domyślnym wyborem (oznaczonym jako "Domyślne:" w tytule), inne możliwości również zostaną udokumentowane (oznaczone jako "Alternatywa:" w tytule). Nie myśl, że społeczność Gentoo zaleca ustawienie domyślne. Jest to jednak wybór, którego zdaniem społeczności Gentoo dokona większość użytkowników.

Czasami można wykonać opcjonalny krok. Takie kroki są oznaczone jako „Opcjonalne:” i nie są potrzebne do instalacji Gentoo. Niektóre opcjonalne kroki zależą jednak od wcześniej podjętej decyzji. Instrukcje poinformują czytelnika, gdy nastąpi taka sytuacja, zarówno po podjęciu decyzji, jak i tuż przed opisem opcjonalnego kroku.

Opcje instalacyjne Gentoo

Gentoo można zainstalować na wiele różnych sposobów. Można go pobrać i zainstalować z oficjalnych nośników instalacyjnych Gentoo, takich jak nasze płyty CD i DVD. Nośnik instalacyjny można zainstalować na pamięci USB lub uzyskać do niego dostęp za pośrednictwem środowiska sieciowego. Alternatywnie, Gentoo można zainstalować z nieoficjalnych nośników, takich jak już zainstalowana dystrybucja lub dysk startowy inny niż Gentoo (np. Knoppix).

Ten dokument opisuje instalację przy użyciu oficjalnego nośnika instalacyjnego Gentoo, a w niektórych przypadkach instalację sieciową.

Note
Aby uzyskać pomoc dotyczącą innych podejść do instalacji, w tym używania płyt CD innych niż Gentoo, przeczytaj nasz Alternatywny przewodnik instalacji.

Udostępniamy również dokument Wskazówki i triki dotyczące instalacji Gentoo, który może okazać się przydatny.

Problemy

Jeśli wystąpił problem w instalacji (lub dokumentacji instalacji), odwiedź nasz system śledzenia błędów i sprawdź czy błąd jest już znany. Jeśli nie, utwórz raport o błędzie, abyśmy mogli się tym zająć. Nie bój się programistów, którzy są przypisani do błędów - (zazwyczaj) nie jedzą ludzi.

Chociaż ten dokument jest specyficzny dla architektury, może zawierać również odniesienia do innych architektur. Duża część Podręcznika Gentoo używa tekstu, który jest identyczny dla wszystkich architektur (aby uniknąć powielania). Takie odniesienia zostały ograniczone do minimum, aby uniknąć nieporozumień.

Jeśli istnieje niepewność, czy problem jest problemem użytkownika (błąd popełniony pomimo dokładnego przeczytania dokumentacji), czy wystąpił problem z oprogramowaniem (błąd, który popełniliśmy pomimo dokładnego przetestowania instalacji/dokumentacji), zapraszamy na międzynarodowy kanał #gentoo (oraz polski kanał #gentoo-pl) w sieci irc.freenode.net. Oczywiście wszyscy są mile widziani, ponieważ nasz kanał czatu obejmuje szerokie spektrum Gentoo.

A propos, jeśli masz dodatkowe pytania dotyczące Gentoo, zajrzyj do artykułu Najczęściej Zadawane Pytania. Istnieje również wątek Najczęściej Zadawane Pytania na Forum Gentoo.



Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎polski • ‎português do Brasil • ‎русский • ‎українська • ‎中文(中国大陆)‎ • ‎日本語 • ‎한국어
IA64 Handbook
Installation
About the installation
Choosing the media
Configuring the network
Preparing the disks
Installing stage3
Installing base system
Configuring the kernel
Configuring the system
Installing tools
Configuring the bootloader
Finalizing
Working with Gentoo
Portage introduction
USE flags
Portage features
Initscript system
Environment variables
Working with Portage
Files and directories
Variables
Mixing software branches
Additional tools
Custom package repository
Advanced features
Network configuration
Getting started
Advanced configuration
Modular networking
Wireless
Adding functionality
Dynamic management


Hardware requirements

Before we start, we first list what hardware requirements are needed to successfully install Gentoo on a ia64 box.


Pretty much every IA64 should be able to boot Gentoo. At the moment we only have a LiveCD, so the machine must have a CDROM drive installed.


Gentoo Linux installation media

Minimal installation CD

The Gentoo minimal installation CD is a bootable image: a self-contained Gentoo environment. It allows the user to boot Linux from the CD or other installation media. During the boot process the hardware is detected and the appropriate drivers are loaded. The image is maintained by Gentoo developers and allows anyone to install Gentoo if an active Internet connection is available.

The Minimal Installation CD is called install-ia64-minimal-<release>.iso.

The occasional Gentoo LiveDVD

Occasionally, a special DVD image is crafted which can be used to install Gentoo. The instructions in this chapter target the Minimal Installation CD, so things might be a bit different when booting from the LiveDVD. However, the LiveDVD (or any other bootable Linux environment) supports getting a root prompt by just invoking sudo su - or sudo -i in a terminal.

What are stages then?

A stage3 tarball is an archive containing a profile specific minimal Gentoo environment. Stage3 tarballs are suitable to continue the Gentoo installation using the instructions in this handbook. Previously, the handbook described the installation using one of three stage tarballs. Gentoo does not offer stage1 and stage2 tarballs for download any more since these are mostly for internal use and for bootstrapping Gentoo on new architectures.

Stage3 tarballs can be downloaded from releases/ia64/autobuilds/ on any of the official Gentoo mirrors. Stage files update frequently and are not included in official installation images.

Downloading

Obtain the media

The default installation media that Gentoo Linux uses are the minimal installation CDs, which host a bootable, very small Gentoo Linux environment. This environment contains all the right tools to install Gentoo. The CD images themselves can be downloaded from the downloads page (recommended) or by manually browsing to the ISO location on one of the many available mirrors.

If downloading from a mirror, the minimal installation CDs can be found as follows:

  1. Go to the releases/ directory.
  2. Select the directory for the relevant target architecture (such as ia64/).
  3. Select the autobuilds/ directory.
  4. For amd64 and x86 architectures select either the current-install-amd64-minimal/ or current-install-x86-minimal/ directory (respectively). For all other architectures navigate to the current-iso/ directory.
Note
Some target architectures such as arm, mips, and s390 will not have minimal install CDs. At this time the Gentoo Release Engineering project does not support building .iso files for these targets.

Inside this location, the installation media file is the file with the .iso suffix. For instance, take a look at the following listing:

CODE Example list of downloadable files at releases/ia64/autobuilds/current-iso/
[DIR] hardened/                                          05-Dec-2014 01:42    -   
[   ] install-ia64-minimal-20141204.iso                 04-Dec-2014 21:04  208M  
[   ] install-ia64-minimal-20141204.iso.CONTENTS        04-Dec-2014 21:04  3.0K  
[   ] install-ia64-minimal-20141204.iso.DIGESTS         04-Dec-2014 21:04  740   
[TXT] install-ia64-minimal-20141204.iso.DIGESTS.asc     05-Dec-2014 01:42  1.6K  
[   ] stage3-ia64-20141204.tar.bz2                      04-Dec-2014 21:04  198M  
[   ] stage3-ia64-20141204.tar.bz2.CONTENTS             04-Dec-2014 21:04  4.6M  
[   ] stage3-ia64-20141204.tar.bz2.DIGESTS              04-Dec-2014 21:04  720   
[TXT] stage3-ia64-20141204.tar.bz2.DIGESTS.asc          05-Dec-2014 01:42  1.5K

In the above example, the install-ia64-minimal-20141204.iso file is the minimal installation CD itself. But as can be seen, other related files exist as well:

  • A .CONTENTS file which is a text file listing all files available on the installation media. This file can be useful to verify if particular firmware or drivers are available on the installation media before downloading it.
  • A .DIGESTS file which contains the hash of the ISO file itself, in various hashing formats/algorithms. This file can be used to verify if the downloaded ISO file is corrupt or not.
  • A .DIGESTS.asc file which not only contains the hash of the ISO file (like the .DIGESTS file), but also a cryptographic signature of that file. This can be used to both verify if the downloaded ISO file is corrupt or not, as well as verify that the download is indeed provided by the Gentoo Release Engineering team and has not been tampered with.

Ignore the other files available at this location for now - those will come back when the installation has proceeded further. Download the .iso file and, if verification of the download is wanted, download the .DIGESTS.asc file for the .iso file as well. The .CONTENTS file does not need to be downloaded as the installation instructions will not refer to this file anymore, and the .DIGESTS file should contain the same information as the .DIGESTS.asc file, except that the latter also contains a signature on top of it.

Verifying the downloaded files

Note
This is an optional step and not necessary to install Gentoo Linux. However, it is recommended as it ensures that the downloaded file is not corrupt and has indeed been provided by the Gentoo Infrastructure team.

Through the .DIGESTS and .DIGESTS.asc files, the validity of the ISO file can be confirmed using the right set of tools. This verification is usually done in two steps:

  1. First, the cryptographic signature is validated to make sure that the installation file is provided by the Gentoo Release Engineering team
  2. If the cryptographic signature validates, then the checksum is verified to make sure that the downloaded file itself is not corrupted

Microsoft Windows based verification

On a Microsoft Windows system, chances are low that the right set of tools to verify checksums and cryptographic signatures are in place.

To first verify the cryptographic signature, tools such as GPG4Win can be used. After installation, the public keys of the Gentoo Release Engineering team need to be imported. The list of keys is available on the signatures page. Once imported, the user can then verify the signature of the .DIGESTS.asc file.

Important
This does not verify that the .DIGESTS file is correct, only that the .DIGESTS.asc file is. That also implies that the checksum should be verified against the values in the .DIGESTS.asc file, which is why the instructions above only refer to downloading the .DIGESTS.asc file.

The checksum itself can be verified using the Hashcalc application, although many others exist as well. Most of the time, these tools will show the user the calculated checksum, and the user is requested to verify this checksum with the value that is inside the .DIGESTS.asc file.

Linux based verification

On a Linux system, the most common method for verifying the cryptographic signature is to use the app-crypt/gnupg software. With this package installed, the following commands can be used to verify the cryptographic signature of the .DIGESTS.asc file.

First, download the right set of keys as made available on the signatures page:

user $gpg --keyserver hkps://hkps.pool.sks-keyservers.net --recv-keys 0xBB572E0E2D182910
gpg: requesting key 0xBB572E0E2D182910 from hkp server pool.sks-keyservers.net
gpg: key 0xBB572E0E2D182910: "Gentoo Linux Release Engineering (Automated Weekly Release Key) <releng@gentoo.org>" 1 new signature
gpg: 3 marginal(s) needed, 1 complete(s) needed, classic trust model
gpg: depth: 0  valid:   3  signed:  20  trust: 0-, 0q, 0n, 0m, 0f, 3u
gpg: depth: 1  valid:  20  signed:  12  trust: 9-, 0q, 0n, 9m, 2f, 0u
gpg: next trustdb check due at 2018-09-15
gpg: Total number processed: 1
gpg:         new signatures: 1

Alternatively you can use instead the WKD to download the key:

--2019-04-19 20:46:32--  https://gentoo.org/.well-known/openpgpkey/hu/wtktzo4gyuhzu8a4z5fdj3fgmr1u6tob?l=releng
Resolving gentoo.org (gentoo.org)... 89.16.167.134
Connecting to gentoo.org (gentoo.org)|89.16.167.134|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 35444 (35K) [application/octet-stream]
Saving to: 'STDOUT'
 
     0K .......... .......... .......... ....                 100% 11.9M=0.003s
 
2019-04-19 20:46:32 (11.9 MB/s) - written to stdout [35444/35444]
 
gpg: key 9E6438C817072058: 84 signatures not checked due to missing keys
gpg: /tmp/test2/trustdb.gpg: trustdb created
gpg: key 9E6438C817072058: public key "Gentoo Linux Release Engineering (Gentoo Linux Release Signing Key) <releng@gentoo.org>" imported
gpg: key BB572E0E2D182910: 12 signatures not checked due to missing keys
gpg: key BB572E0E2D182910: 1 bad signature
gpg: key BB572E0E2D182910: public key "Gentoo Linux Release Engineering (Automated Weekly Release Key) <releng@gentoo.org>" imported
gpg: Total number processed: 2
gpg:               imported: 2
gpg: no ultimately trusted keys found

Next verify the cryptographic signature of the .DIGESTS.asc file:

user $gpg --verify install-ia64-minimal-20141204.iso.DIGESTS.asc
gpg: Signature made Fri 05 Dec 2014 02:42:44 AM CET
gpg:                using RSA key 0xBB572E0E2D182910
gpg: Good signature from "Gentoo Linux Release Engineering (Automated Weekly Release Key) <releng@gentoo.org>" [unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg:          There is no indication that the signature belongs to the owner.
Primary key fingerprint: 13EB BDBE DE7A 1277 5DFD  B1BA BB57 2E0E 2D18 2910

To be absolutely certain that everything is valid, verify the fingerprint shown with the fingerprint on the Gentoo signatures page.

With the cryptographic signature validated, next verify the checksum to make sure the downloaded ISO file is not corrupted. The .DIGESTS.asc file contains multiple hashing algorithms, so one of the methods to validate the right one is to first look at the checksum registered in the .DIGESTS.asc file. For instance, to get the SHA512 checksum:

user $grep -A 1 -i sha512 install-ia64-minimal-20141204.iso.DIGESTS.asc
# SHA512 HASH
364d32c4f8420605f8a9fa3a0fc55864d5b0d1af11aa62b7a4d4699a427e5144b2d918225dfb7c5dec8d3f0fe2cddb7cc306da6f0cef4f01abec33eec74f3024  install-ia64-minimal-20141204.iso
--
# SHA512 HASH
0719a8954dc7432750de2e3076c8b843a2c79f5e60defe43fcca8c32ab26681dfb9898b102e211174a895ff4c8c41ddd9e9a00ad6434d36c68d74bd02f19b57f  install-ia64-minimal-20141204.iso.CONTENTS

In the above output, two SHA512 checksums are shown - one for the install-ia64-minimal-20141204.iso file and one for its accompanying .CONTENTS file. Only the first checksum is of interest, as it needs to be compared with the calculated SHA512 checksum which can be generated as follows:

user $sha512sum install-ia64-minimal-20141204.iso
364d32c4f8420605f8a9fa3a0fc55864d5b0d1af11aa62b7a4d4699a427e5144b2d918225dfb7c5dec8d3f0fe2cddb7cc306da6f0cef4f01abec33eec74f3024  install-ia64-minimal-20141204.iso

As both checksums match, the file is not corrupted and the installation can continue.

Burning a disk

Of course, with just an ISO file downloaded, the Gentoo Linux installation cannot be started. The ISO file needs to be burned on a CD to boot from, and in such a way that its content is burned on the CD, not just the file itself. Below a few common methods are described - a more elaborate set of instructions can be found in Our FAQ on burning an ISO file.

Burning with Microsoft Windows 7 and above

Versions of Microsoft Windows 7 and above can both mount and burn ISO images to optical media without the requirement for third-party software. Simply insert a burnable disk, browse to the downloaded ISO files, right click the file in Windows Explorer, and select "Burn disk image".

Burning with Linux

The cdrecord utility from the package app-cdr/cdrtools can burn ISO images on Linux.

To burn the ISO file on the CD in the /dev/sr0 device (this is the first CD device on the system - substitute with the right device file if necessary):

user $cdrecord dev=/dev/sr0 install-ia64-minimal-20141204.iso

Users that prefer a graphical user interface can use K3B, part of the kde-apps/k3b package. In K3B, go to Tools and use Burn CD Image.

Booting

Booting the installation CD

Once the installation CD is burned, it is time to boot it. Remove all CDs from the CD drives, and insert the Gentoo installation CD. Reboot the system and wait for the EFI firmware to load on the console. The exact option to select will differ depending on the hardware.

Most implementations usually present an option directly on the first menu (the EFI Boot Manager). The exact wording would differ but would usually be something like "CD Boot", "Removable Media Boot" or "Internal Bootable DVD". Select this option.

If the EFI implementation does not present such an option, boot the CD using the EFI Shell. All implementations will present an option to enter the shell on the Boot Manager menu. Select this option. The EFI Shell will display a list of usable block devices (blkn:) and also a list of filesystems the EFI Shell can actually access (fsn:).

In most cases the option will be the fs0: choice; regardless, (provided the CD drive recognizes the CD), one fsn entry for the CD drive (the CD drive's EFI device path will contain CDROM in the wording) will be displayed. Enter fsn:, replacing n as required and including the colon, followed by the Enter key. Next just type elilo followed by the Enter key.

The ELILO boot message is up next, and asks the user to enter a kernel to boot as well as any additional options to pass to the kernel command line. In most cases just hit the Enter key or wait five seconds. Only one kernel is supplied on the IA64 installation CD, the gentoo kernel.

Several kernel aliases are provided which add extra options to the kernel command line, which may need to be used instead of the default gentoo option depending on the hardware:

  • The gentoo-serial option forces a serial console on the first serial port (ttyS0) at 9600bps. This may be required on some older EFI implementations where the kernel can't detect what console to use. Try this option if booting the default gentoo kernel produces no output and if a serial console is used. If the serial console is not connected to the the first serial port then manually select the console by typing gentoo console=ttyS#,9600 where # is the number of the serial port.
  • The gentoo-ilo option forces a serial console on the ttyS3 serial port at 9600bps. This should be used when installing using the HP iLO remote console feature.
  • The gentoo-sgi option forces a serial console on the ttySG0 serial port at 115200bps. This should only be needed on SGI hardware; if the console is properly selected in the default EFI settings, or when using a video console, then this option should not be required.

It is also possible to provide additional kernel options. They represent optional settings to (de)activate at will.

Hardware options
acpi=on This loads support for ACPI and also causes the acpid daemon to be started by the CD on boot. This is only needed if the system requires ACPI to function properly. This is not required for Hyperthreading support.
acpi=off Completely disables ACPI. This is useful on some older systems and is also a requirement for using APM. This will disable any Hyperthreading support of your processor.
console=X This sets up serial console access for the CD. The first option is the device, usually ttyS0 on x86, followed by any connection options, which are comma separated. The default options are 9600,8,n,1.
dmraid=X This allows for passing options to the device-mapper RAID subsystem. Options should be encapsulated in quotes.
doapm This loads APM driver support. This also requires that acpi=off.
dopcmcia This loads support for PCMCIA and Cardbus hardware and also causes the pcmcia cardmgr to be started by the CD on boot. This is only required when booting from PCMCIA/Cardbus devices.
doscsi This loads support for most SCSI controllers. This is also a requirement for booting most USB devices, as they use the SCSI subsystem of the kernel.
sda=stroke This allows the user to partition the whole hard disk even when the BIOS is unable to handle large disks. This option is only used on machines with an older BIOS. Replace sda with the device that requires this option.
ide=nodma This forces the disabling of DMA in the kernel and is required by some IDE chipsets and also by some CDROM drives. If the system is having trouble reading from the IDE CDROM, try this option. This also disables the default hdparm settings from being executed.
noapic This disables the Advanced Programmable Interrupt Controller that is present on newer motherboards. It has been known to cause some problems on older hardware.
nodetect This disables all of the autodetection done by the CD, including device autodetection and DHCP probing. This is useful for doing debugging of a failing CD or driver.
nodhcp This disables DHCP probing on detected network cards. This is useful on networks with only static addresses.
nodmraid Disables support for device-mapper RAID, such as that used for on-board IDE/SATA RAID controllers.
nofirewire This disables the loading of Firewire modules. This should only be necessary if your Firewire hardware is causing a problem with booting the CD.
nogpm This disables gpm console mouse support.
nohotplug This disables the loading of the hotplug and coldplug init scripts at boot. This is useful for doing debugging of a failing CD or driver.
nokeymap This disables the keymap selection used to select non-US keyboard layouts.
nolapic This disables the local APIC on Uniprocessor kernels.
nosata This disables the loading of Serial ATA modules. This is used if the system is having problems with the SATA subsystem.
nosmp This disables SMP, or Symmetric Multiprocessing, on SMP-enabled kernels. This is useful for debugging SMP-related issues with certain drivers and motherboards.
nosound This disables sound support and volume setting. This is useful for systems where sound support causes problems.
nousb This disables the autoloading of USB modules. This is useful for debugging USB issues.
slowusb This adds some extra pauses into the boot process for slow USB CDROMs, like in the IBM BladeCenter.
Logical volume/device management
dolvm This enables support for Linux's Logical Volume Management.
Other options
debug Enables debugging code. This might get messy, as it displays a lot of data to the screen.
docache This caches the entire runtime portion of the CD into RAM, which allows the user to umount /mnt/cdrom and mount another CDROM. This option requires that there is at least twice as much available RAM as the size of the CD.
doload=X This causes the initial ramdisk to load any module listed, as well as dependencies. Replace X with the module name. Multiple modules can be specified by a comma-separated list.
dosshd Starts sshd on boot, which is useful for unattended installs.
passwd=foo Sets whatever follows the equals as the root password, which is required for dosshd since the root password is by default scrambled.
noload=X This causes the initial ramdisk to skip the loading of a specific module that may be causing a problem. Syntax matches that of doload.
nonfs Disables the starting of portmap/nfsmount on boot.
nox This causes an X-enabled LiveCD to not automatically start X, but rather, to drop to the command line instead.
scandelay This causes the CD to pause for 10 seconds during certain portions the boot process to allow for devices that are slow to initialize to be ready for use.
scandelay=X This allows the user to specify a given delay, in seconds, to be added to certain portions of the boot process to allow for devices that are slow to initialize to be ready for use. Replace X with the number of seconds to pause.
Note
The CD will check for no* options before do* options, so that options can be overriden in the exact order specified.

Next the user will be greeted with a boot screen and progress bar. If the installation is done on a system with a non-US keyboard, make sure to immediately press Alt+F1 to switch to verbose mode and follow the prompt. If no selection is made in 10 seconds the default (US keyboard) will be accepted and the boot process will continue. Once the boot process completes, the user is automatically logged in to the "Live" Gentoo Linux environment as the root user, the super user. A root prompt is displayed on the current console, and one can switch to other consoles by pressing Alt+F2, Alt+F3 and Alt+F4. Get back to the one started on by pressing Alt+F1.


Extra hardware configuration

When the Installation medium boots, it tries to detect all the hardware devices and loads the appropriate kernel modules to support the hardware. In the vast majority of cases, it does a very good job. However, in some cases it may not auto-load the kernel modules needed by the system. If the PCI auto-detection missed some of the system's hardware, the appropriate kernel modules have to be loaded manually.

In the next example the 8139too module (which supports certain kinds of network interfaces) is loaded:

root #modprobe 8139too

Optional: User accounts

If other people need access to the installation environment, or there is need to run commands as a non-root user on the installation medium (such as to chat using irssi without root privileges for security reasons), then an additional user account needs to be created and the root password set to a strong password.

To change the root password, use the passwd utility:

root #passwd
New password: (Enter the new password)
Re-enter password: (Re-enter the password)

To create a user account, first enter their credentials, followed by the account's password. The useradd and passwd commands are used for these tasks.

In the next example, a user called john is created:

root #useradd -m -G users john
root #passwd john
New password: (Enter john's password)
Re-enter password: (Re-enter john's password)

To switch from the (current) root user to the newly created user account, use the su command:

root #su - john

Optional: Viewing documentation while installing

TTYs

To view the Gentoo handbook during the installation, first create a user account as described above. Then press Alt+F2 to go to a new terminal.

During the installation, the links command can be used to browse the Gentoo handbook - of course only from the moment that the Internet connection is working.

user $links https://wiki.gentoo.org/wiki/Handbook:IA64

To go back to the original terminal, press Alt+F1.

GNU Screen

The Screen utility is installed by default on official Gentoo installation media. It may be more efficient for the seasoned Linux enthusiast to use screen to view installation instructions via split panes rather than the multiple TTY method mentioned above.

Optional: Starting the SSH daemon

To allow other users to access the system during the installation (perhaps to support during an installation, or even do it remotely), a user account needs to be created (as was documented earlier on) and the SSH daemon needs to be started.

To fire up the SSH daemon on an OpenRC init, execute the following command:

root #rc-service sshd start
Note
If users log on to the system, they will see a message that the host key for this system needs to be confirmed (through what is called a fingerprint). This behavior is typical and can be expected for initial connections to an SSH server. However, later when the system is set up and someone logs on to the newly created system, the SSH client will warn that the host key has been changed. This is because the user now logs on to - for SSH - a different server (namely the freshly installed Gentoo system rather than the live environment that the installation is currently using). Follow the instructions given on the screen then to replace the host key on the client system.

To be able to use sshd, the network needs to function properly. Continue with the chapter on Configuring the network.



/pl

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎polski • ‎português do Brasil • ‎русский • ‎українська • ‎中文(中国大陆)‎ • ‎日本語 • ‎한국어
Instalacja
O instalacji
Wybór medium instalacyjnego
Konfiguracja sieci
Przygotowanie dysków
Instalacja etapu 3
Instalacja systemu podstawowego
Konfiguracja jądra
Konfiguracja systemu
Instalacja narzędzi
Instalacja systemu rozruchowego
Finalizacja
Praca z Gentoo
Wstęp do Portage
Flagi USE
Funkcje portage
System initscript
Zmienne środowiskowe
Praca z Portage
Pliki i katalogi
Zmienne
Mieszanie działów oprogramowania
Dodatkowe narzędzia
Custom package repository
Funkcje zaawansowane
Konfiguracja sieci
Zaczynamy
Zaawansowana konfiguracja
Sieć modularna
Sieć bezprzewodowa
Dodawanie funkcjonalności
Dynamiczne zarządzanie


Automatyczne wykrywanie sieci

Może to po prostu działa?

Jeśli system jest podłączony do sieci Ethernet z serwerem DHCP, jest bardzo prawdopodobne, że sieć została już skonfigurowana automatycznie. Jeśli tak, to wiele poleceń obsługujących sieć na płycie instalacyjnej, takich jak ssh, scp, ping, irssi, wget i links, będzie działać natychmiast.

Ustal nazwy interfejsów

Polecenie ifconfig

Jeśli sieć została skonfigurowana, polecenie ifconfig powinno wyświetlić jeden lub więcej interfejsów sieciowych (oprócz lo). W poniższym przykładzie pojawia się eth0:

root #ifconfig
eth0      Link encap:Ethernet  HWaddr 00:50:BA:8F:61:7A
          inet addr:192.168.0.2  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::50:ba8f:617a/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0
          collisions:1984 txqueuelen:100
          RX bytes:485691215 (463.1 Mb)  TX bytes:123951388 (118.2 Mb)
          Interrupt:11 Base address:0xe800 

W wyniku przejścia w kierunku przewidywalnych nazw interfejsów sieciowych, nazwa interfejsu eth0 w systemie może się znacznie różnić od starej konwencji nazewnictwa. Najnowsze nośniki instalacyjne mogą pokazywać zwykłe nazwy interfejsów sieciowych, takie jak eno0, ens1 lub enp5s0. Poszukaj interfejsu w danych wyjściowych ifconfig, który ma adres IP powiązany z siecią lokalną.

Tip
Jeśli nie zostały wyświetlone żadne interfejsy, gdy użyto standardowego polecenia ifconfig, spróbuj użyć tego samego polecenia z opcją -a. Ta opcja wymusza na narzędziu wyświetlanie wszystkich interfejsów sieciowych wykrytych przez system, niezależnie od tego, czy są włączone, czy wyłączone. Jeśli ifconfig -a nie daje żadnych wyników, oznacza to, że sprzęt jest uszkodzony lub sterownik interfejsu nie został załadowany do jądra. Obie sytuacje wykraczają poza zakres niniejszego podręcznika. Aby uzyskać pomoc, skontaktuj się z #gentoo.

Polecenie ip

Jako alternatywę dla ifconfig można użyć polecenia ip do określenia nazw interfejsów. Poniższy przykład przedstawia dane wyjściowe funkcji ip addr (z innego systemu, więc wyświetlane informacje różnią się od poprzedniego przykładu):

root #ip addr
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether e8:40:f2:ac:25:7a brd ff:ff:ff:ff:ff:ff
    inet 10.0.20.77/22 brd 10.0.23.255 scope global eno1
       valid_lft forever preferred_lft forever
    inet6 fe80::ea40:f2ff:feac:257a/64 scope link 
       valid_lft forever preferred_lft forever

Powyższe dane wyjściowe mogą być nieco bardziej skomplikowane do odczytania niż alternatywne. Nazwa interfejsu w powyższym przykładzie następuje bezpośrednio po numerze; to jest eno1.

W pozostałej części tego podręcznika zakładamy, że działający interfejs sieciowy nosi nazwę eth0.

Opcjonalnie: Konfiguracja serwera proxy

Jeśli dostęp do Internetu odbywa się za pośrednictwem serwera proxy, podczas instalacji konieczne jest skonfigurowanie informacji o serwerze proxy. Definiowanie proxy jest bardzo łatwe: wystarczy zdefiniować zmienną, która zawiera informacje o serwerze proxy.

W większości przypadków wystarczy zdefiniować zmienne za pomocą nazwy hosta serwera. Na przykład zakładamy, że serwer proxy nazywa się proxy.gentoo.org, a port to 8080.

Aby skonfigurować HTTP proxy (dla ruchu HTTP i HTTPS):

root #export http_proxy="http://proxy.gentoo.org:8080"

Aby skonfigurować FTP proxy:

root #export ftp_proxy="ftp://proxy.gentoo.org:8080"

Aby skonfigurować RSYNC proxy:

root #export RSYNC_PROXY="proxy.gentoo.org:8080"

Jeśli serwer proxy wymaga nazwy użytkownika i hasła, użyj następującej składni zmiennej:

CODE Dodawanie nazwy użytkownika i hasła do zmiennej proxy
http://nazwa_użytkownika:hasło@proxy.gentoo.org:8080

Testowanie sieci

Spróbuj spingować serwer DNS twojego dostawcy internetu (znajdujący się w /etc/resolv.conf), jak również wybraną stronę internetową. Zapewnia to, że sieć działa poprawnie i że pakiety sieciowe docierają do sieci, rozpoznawanie nazw DNS działa poprawnie itp.

root #ping -c 3 www.gentoo.org

Jeśli wszystko zadziała, to pozostałą część tego rozdziału można pominąć i przejść od razu do następnego kroku instrukcji instalacji (Przygotowanie dysków).

Automatyczna konfiguracja sieci

Jeśli sieć nie zadziała od razu, niektóre nośniki instalacyjne pozwalają użytkownikowi na użycie net-setup (dla sieci zwykłych lub bezprzewodowych), pppoe-setup (dla użytkowników ADSL) lub pptp (dla użytkowników PPTP).

Jeśli nośnik instalacyjny nie zawiera żadnego z tych narzędzi, przejdź do Ręcznej konfiguracja sieci.

Domyślnie: Używając net-setup

Najprostszym sposobem skonfigurowania sieci, jeśli nie została skonfigurowana automatycznie, jest uruchomienie skryptu net-setup:

root #net-setup eth0

net-setup zada kilka pytań dotyczących środowiska sieciowego. Kiedy wszystko zostanie zrobione, połączenie sieciowe powinno działać. Przetestuj połączenie sieciowe zgodnie z wcześniejszym opisem. Jeśli testy wypadną pozytywnie, gratulujemy! Pomiń resztę tej sekcji i przejdź do Przygotowanie dysków.

Jeśli sieć nadal nie działa, przejdź do Ręcznej konfiguracji sieci.

Alternatywa: Używając PPP

Zakładając, że do połączenia z Internetem potrzebne jest PPPoE, płyta instalacyjna (dowolna wersja) ułatwiła sprawę, dołączając ppp. Użyj dostarczonego skryptu pppoe-setup, aby skonfigurować połączenie. Podczas konfiguracji urządzenie Ethernet, które jest podłączone do modemu ADSL, zostanie zapytane o nazwę użytkownika i hasło, adresy IP serwerów DNS oraz o to, czy podstawowa zapora jest potrzebna, czy nie.

root #pppoe-setup
root #pppoe-start

Jeśli coś pójdzie nie tak, sprawdź dokładnie, czy nazwa użytkownika i hasło są poprawne, patrząc na etc/ppp/pap-secrets lub /etc/ppp/chap-secrets i upewnij się, że używasz odpowiedniego urządzenia Ethernet. Jeśli urządzenie Ethernet nie istnieje, należy załadować odpowiednie moduły sieciowe. W takim przypadku przejdź do Ręcznej konfiguracji sieci, ponieważ zostanie tam wyjaśnione, jak załadować odpowiednie moduły sieciowe.

Jeśli wszystko zadziałało, przejdź do Przygotowania dysku.

Alternatywa: Używając PPTP

Jeśli potrzebna jest obsługa PPTP, użyj pptpclient, który jest dostarczany na instalacyjnych dyskach CD. Jednak najpierw upewnij się, że konfiguracja jest prawidłowa. Edytuj /etc/ppp/pap-secrets lub /etc/ppp/chap-secrets, aby zawierały poprawną kombinację nazwy użytkownika i hasła:

root #nano -w /etc/ppp/chap-secrets

Następnie dostosuj /etc/ppp/options.pptp, jeśli jest to konieczne:

root #nano -w /etc/ppp/options.pptp

Po wykonaniu wszystkich czynności uruchom pptp (wraz z opcjami, których nie można ustawić w options.pptp), aby połączyć się z serwerem:

root #pptp <adres ip serwera>

Teraz przejdź do Przygotowanie dysków.

Ręczna konfiguracja sieci

Ładowanie odpowiednich modułów sieciowych

Podczas uruchamiania płyty instalacyjnej CD, próbuje ona wykryć wszystkie urządzenia sprzętowe i ładuje odpowiednie moduły jądra (sterowniki) do obsługi sprzętu. W zdecydowanej większości wypadków sprawdza się bardzo dobrze. Jednak w niektórych przypadkach może ona nie ładować automatycznie potrzebnych modułów jądra.

Jeśli wykonanie net-setup lub pppoe-setup nie powiodło się, to możliwe, że karta sieciowa nie została znaleziona podczas ładowania obrazu instalacyjnego. Oznacza to, że użytkownicy mogą być zmuszeni do ręcznego ładowania odpowiednich modułów jądra.

Aby dowiedzieć się, jakie moduły jądra są dostarczane dla sieci, użyj polecenia ls:

root #ls /lib/modules/`uname -r`/kernel/drivers/net

Jeśli został znaleziony sterownik dla urządzenia sieciowego, użyj modprobe, aby załadować moduł jądra. Na przykład, aby załadować moduł pcnet32:

root #modprobe pcnet32

Aby sprawdzić, czy została wykryta karta sieciowa, użyj ifconfig. Wykryta karta sieciowa spowodowałaby coś takiego (ponownie, eth0 to tylko przykład):

root #ifconfig eth0
eth0      Link encap:Ethernet  HWaddr FE:FD:00:00:00:00  
          BROADCAST NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Jeśli jednak zostanie wyświetlony następujący błąd, karta sieciowa nie została wykryta:

root #ifconfig eth0
eth0: error fetching interface information: Device not found

Dostępne nazwy interfejsów sieciowych w systemie można wyświetlić w systemie plików /sys:

root #ls /sys/class/net
dummy0  eth0  lo  sit0  tap0  wlan0

W powyższym przykładzie znaleziono 6 interfejsów. eth0 to najprawdopodobniej (przewodowa) karta sieciowa Ethernet, podczas gdy wlan0 to karta bezprzewodowa.

Zakładając, że karta sieciowa została wykryta, spróbuj ponownie net-setup lub pppoe-setup (powinno teraz działać), ale dla napalonych ludzi wyjaśniamy również jak skonfigurować sieć ręcznie.

Wybierz jedną z następujących sekcji w zależności od konfiguracji sieci:

Używając DHCP

DHCP (Dynamic Host Configuration Protocol) umożliwia automatyczne otrzymywanie informacji sieciowych (adres IP, maska sieci, adres rozgłoszeniowy, brama, serwery nazw itp.). Działa to tylko wtedy, gdy w sieci znajduje się serwer DHCP (lub jeśli dostawca usług internetowych zapewnia usługę DHCP). Aby interfejs sieciowy odbierał te informacje automatycznie, użyj dhcpcd:

root #dhcpcd eth0

Niektórzy administratorzy sieci wymagają, aby system używał nazwy hosta i nazwy domeny podanych przez serwer DHCP. W takim przypadku użyj:

root #dhcpcd -HD eth0

Jeśli zadziałało (spróbuj spingować jakiś serwer internetowy, taki jak 8.8.8.8 Google lub 1.1.1.1 Cloudflare), wtedy wszystko zostało ustawione i możesz kontynuować. Pomiń resztę tej sekcji i przejdź do Przygotowanie dysków.

Przygotowanie do dostępu bezprzewodowego

Note
Support for the iw command might be architecture-specific. If the command is not available see if the net-wireless/iw package is available for the current architecture. The iw command will be unavailable unless the net-wireless/iw package has been installed.

When using a wireless (802.11) card, the wireless settings need to be configured before going any further. To see the current wireless settings on the card, one can use iw. Running iw might show something like:

root #iw dev wlp9s0 info
Interface wlp9s0
	ifindex 3
	wdev 0x1
	addr 00:00:00:00:00:00
	type managed
	wiphy 0
	channel 11 (2462 MHz), width: 20 MHz (no HT), center1: 2462 MHz
	txpower 30.00 dBm

Aby sprawdzić bieżące połączenie:

root #iw dev wlp9s0 link
Not connected.

lub

root #iw dev wlp9s0 link
Connected to 00:00:00:00:00:00 (on wlp9s0)
	SSID: GentooNode
	freq: 2462
	RX: 3279 bytes (25 packets)
	TX: 1049 bytes (7 packets)
	signal: -23 dBm
	tx bitrate: 1.0 MBit/s
Note
Some wireless cards may have a device name of wlan0 or ra0 instead of wlp9s0. Run ip link to determine the correct device name.

For most users, there are only two settings needed to connect, the ESSID (aka wireless network name) and, optionally, the WEP key.

  • Najpierw upewnij się, że interfejs jest aktywny:
root #ip link set dev wlp9s0 up
  • Aby połączyć się z otwartą siecią o nazwie "GentooNode":
root #iw dev wlp9s0 connect -w GentooNode
  • Aby połączyć się za pomocą szesnastkowego klucza WEP, poprzedź klucz przedrostkiem d::
root #iw dev wlp9s0 connect -w GentooNode key 0:d:1234123412341234abcd
  • Aby połączyć się za pomocą klucza ASCII WEP:
root #iw dev wlp9s0 connect -w GentooNode key 0:jakies-haslo
Note
Jeśli sieć bezprzewodowa jest wymaga szyfrowania WPA lub WPA2, należy użyć wpa_supplicant. Więcej informacji na temat konfigurowania sieci bezprzewodowych w Gentoo Linux można znaleźć w rozdziale Sieć bezprzewodowa w Podręczniku Gentoo.

Confirm the wireless settings by using iw dev wlp9s0 link. Once wireless is working, continue configuring the IP level networking options as described in the next section (Understanding network terminology) or use the net-setup tool as described previously.

Zrozumienie terminologii sieciowej

Note
If the IP address, broadcast address, netmask and nameservers are known, then skip this subsection and continue with Using ifconfig and route.

If all of the above fails, the network will need to be configured manually. This is not difficult at all. However, some knowledge of network terminology and basic concepts might be necessary. After reading this section, users will know what a gateway is, what a netmask serves for, how a broadcast address is formed and why systems need nameservers.

In a network, hosts are identified by their IP address (Internet Protocol address). Such an address is perceived as a combination of four numbers between 0 and 255. Well, at least when using IPv4 (IP version 4). In reality, such an IPv4 address consists of 32 bits (ones and zeros). Let's view an example:

CODE Przykład adresu IPv4
Adres IP (liczby):    192.168.0.2
Adres IP (bity):      11000000 10101000 00000000 00000010
                        -------- -------- -------- --------
                           192      168       0        2
Note
The successor of IPv4, IPv6, uses 128 bits (ones and zeros). In this section, the focus is on IPv4 addresses.

Such an IP address is unique to a host as far as all accessible networks are concerned (i.e. every host that one wants to be able to reach must have a unique IP address). In order to distinguish between hosts inside and outside a network, the IP address is divided in two parts: the network part and the host part.

The separation is written down with the netmask, a collection of ones followed by a collection of zeros. The part of the IP that can be mapped on the ones is the network-part, the other one is the host-part. As usual, the netmask can be written down as an IP address.

CODE Przykład separacji sieci i hosta
Adres IP:            192      168      0         2
                   11000000 10101000 00000000 00000010
Maska podsieci:    11111111 11111111 11111111 00000000
                      255      255     255       0
                  +--------------------------+--------+
                              Sieć              Host

Innymi słowy, 192.168.0.14 jest częścią przykładowej sieci, ale 192.168.1.2 nie.

The broadcast address is an IP address with the same network-part as the network, but with only ones as host-part. Every host on the network listens to this IP address. It is truly meant for broadcasting packets.

CODE Adres rozgłoszeniowy
Adres IP:           192      168      0         2
                 11000000 10101000 00000000 00000010
Rozgłoszeniowy:  11000000 10101000 00000000 11111111
                    192      168      0       255
                +--------------------------+--------+
                            Sieć             Host

To be able to surf on the Internet, each computer in the network must know which host shares the Internet connection. This host is called the gateway. Since it is a regular host, it has a regular IP address (for instance 192.168.0.1).

Previously we stated that every host has its own IP address. To be able to reach this host by a name (instead of an IP address) we need a service that translates a name (such as dev.gentoo.org) to an IP address (such as 64.5.62.82). Such a service is called a name service. To use such a service, the necessary name servers need to be defined in /etc/resolv.conf.

In some cases, the gateway also serves as a nameserver. Otherwise the nameservers provided by the ISP need to be entered in this file.

To summarize, the following information is needed before continuing:

Network item Example
The system IP address 192.168.0.2
Netmask 255.255.255.0
Broadcast 192.168.0.255
Gateway 192.168.0.1
Nameserver(s) 195.130.130.5, 195.130.130.133

Using ifconfig and route

Employing tools from the sys-apps/net-tools package, setting up the network manually generally consists of three steps:

  1. Assign an IP address using the ifconfig command.
  2. Set up routing to the gateway using the route command.
  3. Finish up by placing valid nameserver IPs in the /etc/resolv.conf file.

To assign an IP address, the IP address, broadcast address, and netmask are needed. Execute the following command, substituting ${IP_ADDR} with the target IP address, ${BROADCAST} with the target broadcast address, and ${NETMASK} with the target netmask:

root #ifconfig eth0 ${IP_ADDR} broadcast ${BROADCAST} netmask ${NETMASK} up

To configure routing using route, substitute the ${GATEWAY} value with the appropriate gateway IP address:

root #route add default gw ${GATEWAY}

Now open the /etc/resolv.conf file using a text editor:

root #nano -w /etc/resolv.conf

Fill in the nameserver(s) using the following as a template substituting ${NAMESERVER1} and ${NAMESERVER2} with nameserver IP addresses as necessary. More than one nameserver can be added:

FILE /etc/resolv.confDefault resolv.conf template
nameserver ${NAMESERVER1}
nameserver ${NAMESERVER2}

Now test the network by pinging an Internet server (like Google's 8.8.8.8 or Cloudflare's 1.1.1.1). Once connected, continue with Preparing the disks.



Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎polski • ‎português do Brasil • ‎русский • ‎українська • ‎中文(中国大陆)‎ • ‎日本語 • ‎한국어
IA64 Handbook
Installation
About the installation
Choosing the media
Configuring the network
Preparing the disks
Installing stage3
Installing base system
Configuring the kernel
Configuring the system
Installing tools
Configuring the bootloader
Finalizing
Working with Gentoo
Portage introduction
USE flags
Portage features
Initscript system
Environment variables
Working with Portage
Files and directories
Variables
Mixing software branches
Additional tools
Custom package repository
Advanced features
Network configuration
Getting started
Advanced configuration
Modular networking
Wireless
Adding functionality
Dynamic management


Chrooting

Optional: Selecting mirrors

Distribution files

In order to download source code quickly it is recommended to select a fast mirror. Portage will look in the make.conf file for the GENTOO_MIRRORS variable and use the mirrors listed therein. It is possible to surf to the Gentoo mirror list and search for a mirror (or mirrors) that is close to the system's physical location (as those are most frequently the fastest ones). However, we provide a nice tool called mirrorselect which provides users with a nice interface to select the mirrors needed. Just navigate to the mirrors of choice and press Spacebar to select one or more mirrors.

root #mirrorselect -i -o >> /mnt/gentoo/etc/portage/make.conf

Gentoo ebuild repository

A second important step in selecting mirrors is to configure the Gentoo ebuild repository via the /etc/portage/repos.conf/gentoo.conf file. This file contains the sync information needed to update the package repository (the collection of ebuilds and related files containing all the information Portage needs to download and install software packages).

Configuring the repository can be done in a few simple steps. First, if it does not exist, create the repos.conf directory:

root #mkdir --parents /mnt/gentoo/etc/portage/repos.conf

Next, copy the Gentoo repository configuration file provided by Portage to the (newly created) repos.conf directory:

root #cp /mnt/gentoo/usr/share/portage/config/repos.conf /mnt/gentoo/etc/portage/repos.conf/gentoo.conf

Take a peek with a text editor or by using the cat command. The inside of the file should be in .ini format and look like this:

FILE /mnt/gentoo/etc/portage/repos.conf/gentoo.conf
[DEFAULT]
main-repo = gentoo
 
[gentoo]
location = /var/db/repos/gentoo
sync-type = rsync
sync-uri = rsync://rsync.gentoo.org/gentoo-portage
auto-sync = yes
sync-rsync-verify-jobs = 1
sync-rsync-verify-metamanifest = yes
sync-rsync-verify-max-age = 24
sync-openpgp-key-path = /usr/share/openpgp-keys/gentoo-release.asc
sync-openpgp-key-refresh-retry-count = 40
sync-openpgp-key-refresh-retry-overall-timeout = 1200
sync-openpgp-key-refresh-retry-delay-exp-base = 2
sync-openpgp-key-refresh-retry-delay-max = 60
sync-openpgp-key-refresh-retry-delay-mult = 4

The default sync-uri variable value listed above will determine a mirror location based on a rotation. This will aid in easing bandwidth stress on Gentoo's infrastructure and will provide a fail-safe in case a specific mirror is offline. It is recommended the default URI is retained unless a local, private Portage mirror will be used.

Tip
For those interested, the official specification for Portage's plug-in sync API can be found in the Portage project's Sync article.

Copy DNS info

One thing still remains to be done before entering the new environment and that is copying over the DNS information in /etc/resolv.conf. This needs to be done to ensure that networking still works even after entering the new environment. /etc/resolv.conf contains the name servers for the network.

To copy this information, it is recommended to pass the --dereference option to the cp command. This ensures that, if /etc/resolv.conf is a symbolic link, that the link's target file is copied instead of the symbolic link itself. Otherwise in the new environment the symbolic link would point to a non-existing file (as the link's target is most likely not available inside the new environment).

root #cp --dereference /etc/resolv.conf /mnt/gentoo/etc/

Mounting the necessary filesystems

In a few moments, the Linux root will be changed towards the new location. To make sure that the new environment works properly, certain filesystems need to be made available there as well.

The filesystems that need to be made available are:

  • /proc/ which is a pseudo-filesystem (it looks like regular files, but is actually generated on-the-fly) from which the Linux kernel exposes information to the environment
  • /sys/ which is a pseudo-filesystem, like /proc/ which it was once meant to replace, and is more structured than /proc/
  • /dev/ is a regular file system, partially managed by the Linux device manager (usually udev), which contains all device files

The /proc/ location will be mounted on /mnt/gentoo/proc/ whereas the other two are bind-mounted. The latter means that, for instance, /mnt/gentoo/sys/ will actually be /sys/ (it is just a second entry point to the same filesystem) whereas /mnt/gentoo/proc/ is a new mount (instance so to speak) of the filesystem.

root #mount --types proc /proc /mnt/gentoo/proc
root #mount --rbind /sys /mnt/gentoo/sys
root #mount --make-rslave /mnt/gentoo/sys
root #mount --rbind /dev /mnt/gentoo/dev
root #mount --make-rslave /mnt/gentoo/dev
Note
The --make-rslave operations are needed for systemd support later in the installation.
Warning
When using non-Gentoo installation media, this might not be sufficient. Some distributions make /dev/shm a symbolic link to /run/shm/ which, after the chroot, becomes invalid. Making /dev/shm/ a proper tmpfs mount up front can fix this:
root #test -L /dev/shm && rm /dev/shm && mkdir /dev/shm
root #mount --types tmpfs --options nosuid,nodev,noexec shm /dev/shm

Also ensure that mode 1777 is set:

root # chmod 1777 /dev/shm

Entering the new environment

Now that all partitions are initialized and the base environment installed, it is time to enter the new installation environment by chrooting into it. This means that the session will change its root (most top-level location that can be accessed) from the current installation environment (installation CD or other installation medium) to the installation system (namely the initialized partitions). Hence the name, change root or chroot.

This chrooting is done in three steps:

  1. The root location is changed from / (on the installation medium) to /mnt/gentoo/ (on the partitions) using chroot
  2. Some settings (those in /etc/profile) are reloaded in memory using the source command
  3. The primary prompt is changed to help us remember that this session is inside a chroot environment.
root #chroot /mnt/gentoo /bin/bash
root #source /etc/profile
root #export PS1="(chroot) ${PS1}"

From this point, all actions performed are immediately on the new Gentoo Linux environment. Of course it is far from finished, which is why the installation still has some sections left!

Tip
If the Gentoo installation is interrupted anywhere after this point, it should be possible to 'resume' the installation at this step. There is no need to repartition the disks again! Simply mount the root partition and run the steps above starting with copying the DNS info to re-enter the working environment. This is also useful for fixing bootloader issues. More information can be found in the chroot article.


Configuring Portage

Installing a Gentoo ebuild repository snapshot from the web

Next step is to install a snapshot of the Gentoo ebuild repository. This snapshot contains a collection of files that informs Portage about available software titles (for installation), which profiles the system administrator can select, package or profile specific news items, etc.

The use of emerge-webrsync is recommended for those who are behind restrictive firewalls (it uses HTTP/FTP protocols for downloading the snapshot) and saves network bandwidth. Readers who have no network or bandwidth restrictions can happily skip down to the next section.

This will fetch the latest snapshot (which is released on a daily basis) from one of Gentoo's mirrors and install it onto the system:

root #emerge-webrsync
Note
During this operation, emerge-webrsync might complain about a missing /var/db/repos/gentoo/ location. This is to be expected and nothing to worry about - the tool will create the location.

From this point onward, Portage might mention that certain updates are recommended to be executed. This is because system packages installed through the stage file might have newer versions available; Portage is now aware of new packages because of the repository snapshot. Package updates can be safely ignored for now; updates can be delayed until after the Gentoo installation has finished.

Opcjonalne: Aktualizowanie repozytorium Gentoo

It is possible to update the Gentoo ebuild repository to the latest version. The previous emerge-webrsync command will have installed a very recent snapshot (usually recent up to 24h) so this step is definitely optional.

Suppose there is a need for the last package updates (up to 1 hour), then use emerge --sync. This command will use the rsync protocol to update the Gentoo ebuild repository (which was fetched earlier on through emerge-webrsync) to the latest state.

root #emerge --sync

On slow terminals, like some framebuffers or serial consoles, it is recommended to use the --quiet option to speed up the process:

root #emerge --sync --quiet

Reading news items

When the Gentoo ebuild repository is synchronized, Portage may output informational messages similar to the following:

* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.

News items were created to provide a communication medium to push critical messages to users via the Gentoo ebuild repository. To manage them, use eselect news. The eselect application is a Gentoo-specific utility that allows for a common management interface for system administration. In this case, eselect is asked to use its news module.

For the news module, three operations are most used:

  • With list an overview of the available news items is displayed.
  • With read the news items can be read.
  • With purge news items can be removed once they have been read and will not be reread anymore.
root #eselect news list
root #eselect news read

More information about the news reader is available through its manual page:

root #man news.eselect

Choosing the right profile

A profile is a building block for any Gentoo system. Not only does it specify default values for USE, CFLAGS, and other important variables, it also locks the system to a certain range of package versions. These settings are all maintained by Gentoo's Portage developers.

You can see what profile the system is currently using with eselect, now using the profile module:

root #eselect profile list
Available profile symlink targets:
  [1]   default/linux/ia64/ *
  [2]   default/linux/ia64//desktop
  [3]   default/linux/ia64//desktop/gnome
  [4]   default/linux/ia64//desktop/kde
Note
The output of the command is just an example and evolves over time.
Note
If you are using Systemd, please make sure the profile name contains systemd. If you are using OpenRC, please make sure the profile name does not contain systemd.

As can be seen, there are also desktop subprofiles available for some architectures.

Warning
Profile upgrades are not to be taken lightly. When selecting the initial profile, make sure to use profile corresponding to the same version as the one initially used by stage3 (e.g. ). Each new profile version is announced through a news item containing migration instructions. Make sure to read it and follow them before switching to a newer profile.

After viewing the available profiles for the ia64 architecture, users can select a different profile for the system:

root #eselect profile set 2



Note
The developer subprofile is specifically for Gentoo Linux development and is not meant to be used by casual users.

Updating the @world set

At this point, it is wise to update the system's @world set so that a base can be established.

This following step is necessary so the system can apply any updates or USE flag changes which have appeared since the stage3 was built and from any profile selection:

root #emerge --ask --verbose --update --deep --newuse @world
Tip
If a full scale desktop environment profile has been selected this process could greatly extend the amount of time necessary for the install process. Those in a time crunch can work by this 'rule of thumb': the shorter the profile name, the less specific the system's @world set; the less specific the @world set, the fewer packages the system will require. In other words:
  • Selecting default/linux/amd64/ will require very few packages to be updated, whereas
  • Selecting default/linux/amd64//desktop/gnome/systemd will require many packages to be installed since the init system is changing from OpenRC to systemd, and the GNOME desktop environment framework will be installed.

Configuring the USE variable

USE is one of the most powerful variables Gentoo provides to its users. Several programs can be compiled with or without optional support for certain items. For instance, some programs can be compiled with support for GTK+ or with support for Qt. Others can be compiled with or without SSL support. Some programs can even be compiled with framebuffer support (svgalib) instead of X11 support (X-server).

Most distributions compile their packages with support for as much as possible, increasing the size of the programs and startup time, not to mention an enormous amount of dependencies. With Gentoo users can define what options a package should be compiled with. This is where USE comes into play.

In the USE variable users define keywords which are mapped onto compile-options. For instance, ssl will compile SSL support in the programs that support it. -X will remove X-server support (note the minus sign in front). gnome gtk -kde -qt4 -qt5 will compile programs with GNOME (and GTK+) support, and not with KDE (and Qt) support, making the system fully tweaked for GNOME (if the architecture supports it).

The default USE settings are placed in the make.defaults files of the Gentoo profile used by the system. Gentoo uses a (complex) inheritance system for its profiles, which we will not dive into at this stage. The easiest way to check the currently active USE settings is to run emerge --info and select the line that starts with USE:

root #emerge --info | grep ^USE
USE="X acl alsa amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri ..."
Note
The above example is truncated, the actual list of USE values is much, much larger.

A full description on the available USE flags can be found on the system in /var/db/repos/gentoo/profiles/use.desc.

root #less /var/db/repos/gentoo/profiles/use.desc

Inside the less command, scrolling can be done using the and keys, and exited by pressing q.

As an example we show a USE setting for a KDE-based system with DVD, ALSA, and CD recording support:

root #nano -w /etc/portage/make.conf
FILE /etc/portage/make.confEnabling flags for a KDE/Plasma-based system with DVD, ALSA, and CD recording support
USE="-gtk -gnome qt4 qt5 kde dvd alsa cdr"

When USE is defined in /etc/portage/make.conf it is added (or removed if the USE flag starts with the - sign) from that default list. Users who want to ignore any default USE settings and manage it completely themselves should start the USE definition in make.conf with -*:

FILE /etc/portage/make.confIgnoring default USE flags
USE="-* X acl alsa"
Warning
Although possible, setting -* (as seen in the example above) is discouraged since carefully chosen USE flag defaults may be configured for some packages to prevent conflicts and other errors.

Optional: Configuring the ACCEPT_LICENSE variable

All of the Gentoo packages are tagged with the license(s) the package falls under. This allows users to select software by specific licenses or groups of licenses prior to installing it.

Important
The LICENSE variable in an ebuild is only a guideline for Gentoo developers and users. It is not a legal statement, and there is no guarantee that it will reflect reality. So don't rely on it, but check the package itself in depth, including all files that you use.

Portage uses the ACCEPT_LICENSE variable to determine which packages to allow without prompting the user for the licenses previously accepted. Exceptions can be made per-package in /etc/portage/package.license as well.

The license groups defined in the Gentoo repository, managed by the Gentoo Licenses project, are:

Group Name Description
@GPL-COMPATIBLE GPL compatible licenses approved by the Free Software Foundation [a_license 1]
@FSF-APPROVED Free software licenses approved by the FSF (includes @GPL-COMPATIBLE)
@OSI-APPROVED Licenses approved by the Open Source Initiative [a_license 2]
@MISC-FREE Misc licenses that are probably free software, i.e. follow the Free Software Definition [a_license 3] but are not approved by either FSF or OSI
@FREE-SOFTWARE Combines @FSF-APPROVED, @OSI-APPROVED and @MISC-FREE
@FSF-APPROVED-OTHER FSF-approved licenses for "free documentation" and "works of practical use besides software and documentation" (including fonts)
@MISC-FREE-DOCS Misc licenses for free documents and other works (including fonts) that follow the free definition [a_license 4] but are NOT listed in @FSF-APPROVED-OTHER
@FREE-DOCUMENTS Combines @FSF-APPROVED-OTHER and @MISC-FREE-DOCS
@FREE Metaset of all licenses with the freedom to use, share, modify and share modifications. Combines @FREE-SOFTWARE and @FREE-DOCUMENTS
@BINARY-REDISTRIBUTABLE Licenses that at least permit free redistribution of the software in binary form. Includes @FREE
@EULA License agreements that try to take away your rights. These are more restrictive than "all-rights-reserved" or require explicit approval

Gentoo comes with a predefined value in the profiles, for example:

user $portageq envvar ACCEPT_LICENSE
@FREE

This can be customized system wide by changing /etc/portage/make.conf. The default value will only accept licenses that are explicitly approved by the Free Software Foundation, the Open Source Initiative, or that follow the Free Software Definition:

FILE /etc/portage/make.confCustomizing ACCEPT_LICENSE
ACCEPT_LICENSE="-* @FREE"

Per package overrides can then be added if necessary and desired, for example:

FILE /etc/portage/package.license/kernelSample license acceptance
app-arch/unrar unRAR
sys-kernel/linux-firmware @BINARY-REDISTRIBUTABLE
sys-firmware/intel-microcode intel-ucode


Timezone

Select the timezone for the system. Look for the available timezones in /usr/share/zoneinfo/:

root #ls /usr/share/zoneinfo

Suppose the timezone of choice is Europe/Brussels.

OpenRC

We write the timezone name into the /etc/timezone file.

root #echo "Europe/Brussels" > /etc/timezone

Please avoid the /usr/share/zoneinfo/Etc/GMT* timezones as their names do not indicate the expected zones. For instance, GMT-8 is in fact GMT+8.

Next, reconfigure the sys-libs/timezone-data package, which will update the /etc/localtime file for us, based on the /etc/timezone entry. The /etc/localtime file is used by the system C library to know the timezone the system is in.

root #emerge --config sys-libs/timezone-data

Systemd

We use a slightly different approach here; we generate a symbolic link:

root #ln -sf ../usr/share/zoneinfo/Europe/Brussels /etc/localtime

Later, when systemd is running, we can configure the timezone and related settings with the timedatectl command.

Configure locales

Locale generation

Most users will want to use only one or two locales on their system.

Locales specify not only the language that the user should use to interact with the system, but also the rules for sorting strings, displaying dates and times, etc. Locales are case sensitive and must be represented exactly as described. A full listing of available locales can be found in the /usr/share/i18n/SUPPORTED file.

Supported system locales must be defined in the /etc/locale.gen file.

root #nano -w /etc/locale.gen

The following locales are an example to get both English (United States) and German (Germany/Deutchland) with the accompanying character formats (like UTF-8).

FILE /etc/locale.genEnabling US and DE locales with the appropriate character formats
en_US ISO-8859-1
en_US.UTF-8 UTF-8
de_DE ISO-8859-1
de_DE.UTF-8 UTF-8
Warning
We strongly suggest adding at least one UTF-8 locale because many applications may require it to build properly.

The next step is to run the locale-gen command. This command generates all locales specified in the /etc/locale.gen file.

root #locale-gen

To verify that the selected locales are now available, run locale -a.

Locale selection

Once done, it is now time to set the system-wide locale settings. Again we use eselect for this, now with the locale module.

With eselect locale list, the available targets are displayed:

root #eselect locale list
Available targets for the LANG variable:
  [1]  C
  [2]  C.utf8
  [3]  en_US
  [4]  en_US.iso88591
  [5]  en_US.utf8
  [6]  de_DE
  [7]  de_DE.iso88591
  [8]  de_DE.iso885915
  [9]  de_DE.utf8
  [10] POSIX
  [ ]  (free form)

With eselect locale set <NUMBER> the correct locale can be selected:

root #eselect locale set 9

Manually, this can still be accomplished through the /etc/env.d/02locale file and for Systemd the /etc/locale.conf file:

FILE /etc/env.d/02localeManually setting system locale definitions
LANG="de_DE.UTF-8"
LC_COLLATE="C.UTF-8"

Setting the locale will avoid warnings and errors during kernel and software compilations later in the installation.

Now reload the environment:

root #env-update && source /etc/profile && export PS1="(chroot) ${PS1}"

A full Localization guide to provide additional guidance through the locale selection process. Another interesting article is the UTF-8 guide for very specific information to enable UTF-8 on the system.



Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎polski • ‎português do Brasil • ‎русский • ‎українська • ‎中文(中国大陆)‎ • ‎日本語 • ‎한국어
Instalacja
O instalacji
Wybór medium instalacyjnego
Konfiguracja sieci
Przygotowanie dysków
Instalacja etapu 3
Instalacja systemu podstawowego
Konfiguracja jądra
Konfiguracja systemu
Instalacja narzędzi
Instalacja systemu rozruchowego
Finalizacja
Praca z Gentoo
Wstęp do Portage
Flagi USE
Funkcje portage
System initscript
Zmienne środowiskowe
Praca z Portage
Pliki i katalogi
Zmienne
Mieszanie działów oprogramowania
Dodatkowe narzędzia
Custom package repository
Funkcje zaawansowane
Konfiguracja sieci
Zaczynamy
Zaawansowana konfiguracja
Sieć modularna
Sieć bezprzewodowa
Dodawanie funkcjonalności
Dynamiczne zarządzanie



Installing elilo

IA64 platform are EFI platforms. At least the following boot loader applications are known to work: elilo and grub.

elilo (old and tested)

root #emerge --ask sys-boot/elilo

Its configuration file is called /etc/elilo.conf and a sample file is installed in the typical docs directory (/usr/share/doc/elilo-<version>/). Here is another sample configuration:

FILE /etc/elilo.confExample elilo configuration
boot=/dev/sda1
delay=30
timeout=50
default=Gentoo
append="console=ttyS0,9600"
prompt
  
image=/vmlinuz
	label=Gentoo
	root=/dev/sda3
	read-only
  
image=/vmlinuz.old
	label=Gentoo.old
	root=/dev/sda3
	read-only

The boot line tells elilo the location of the boot partition (in this case, /dev/sda1). The delay line sets the number of 10th of seconds before automatically booting the default when in non-interactive mode. The timeout line is just like the delay line but for interactive mode. The default line sets the default kernel entry (which is defined below). The append line adds extra options to the kernel command line. The prompt sets the default elilo behavior to interactive.

The sections that start with image define different bootable images. Each image has a nice label, a root filesystem, and will only mount the root filesystem read-only.

If, while building the Linux kernel, an initramfs was also configured to boot from, then it is necessary to change the configuration by referring to this initramfs file and telling the initramfs where the root device is at:

FILE /etc/elilo.confUpdated configuration to reflect use of initramfs
image=/vmlinuz
	label=Gentoo
	initrd=/initramfs-genkernel-ia64-3.16.5-gentoo
	append="initrd=initramfs-genkernel-ia64-3.16.5-gentoo root=/dev/sda3 console=ttyS0,9600"
	read-only

When the configuration is done, run elilo --efiboot. The --efiboot option adds a menu entry for Gentoo Linux to the EFI Boot Manager:

root #elilo --efiboot

grub (new and shiny)

The setup is a generic efi64 process (tested at least on rx3600). Enable efi64 application for grub:

FILE /etc/portage/make.conf
GRUB_PLATFORMS=efi-64
Install grub package:
root #emerge --ask sys-boot/grub

Install grub EFI application:

root #grub-install

This will install grubia64.efi into /boot/efi (default EFI partition location).

Generate bootloader config with menu entries:

root #grub-mkconfig --output=/boot/grub/grub.cfg
.

Add an EFI boot entry to run /EFI/gentoo/grubia64.efi as a boot loader. TODO: provide exact Efibootmgr command that adds an entry.


Ponowne uruchomienie systemu

Wyjdź z środowiska chroot i odmontuj wszystkie zamontowane partycje. Następnie wpisz magiczne polecenie, które inicjuje ostateczny, prawdziwy test: reboot.

root #exit
cdimage ~#cd
cdimage ~#umount -l /mnt/gentoo/dev{/shm,/pts,}
cdimage ~#umount -R /mnt/gentoo
cdimage ~#reboot

Nie zapomnij usunąć medium instalacyjnego, w przeciwnym razie zamiast nowego systemu Gentoo może zostać ponownie uruchomione medium instalacyjne.

Po uruchomieniu świeżo zainstalowanego środowiska Gentoo, kontynuuj Finalizowanie instalacji Gentoo.


Warning: Display title "Gentoo Linux ia64 Podręcznik: Instalowanie Gentoo" overrides earlier display title "Handbook:IA64/Full/Installation".