This document provides an overview on all kernel sources that Gentoo provides through the main ebuild repository.
As with everything else in Gentoo Linux, the philosophy of the Gentoo Kernel team is to give the user as much freedom of choice as possible. When looking at the output of emerge -s "%@^sys-kernel/.*-sources" it is easy to see a large variety of kernels to choose from. This document will attempt to give a brief rundown of the goals of each of the patch sets that Gentoo provides and also explain other kernel sources that are available.
Supported kernel packages
genkernel is a kernel and initramfs build utility that has a default kernel configuration to enable common options and drivers in the kernel automatically. This is usually recommended for users who do not feel comfortable about compiling a kernel manually.
For more information, please read the Genkernel article.
For most users, thekernel is recommended. gentoo-sources is a kernel based on Linux 4.x and 5.x, lightly patched to fix security problems, kernel bugs, and to increase compatibility with the more uncommon system architectures.
Thepackage absorbs most of the resources of the Gentoo kernel team. They are brought to the user by a group of talented developers, which can count on the expertise of popular kernel hacker Greg Kroah-Hartman, maintainer of udev and responsible for the USB and PCI subsystems of the official Linux kernel.
The Distribution Kernel project provides a default configuration that works for most of diverse systems, for users who are not interested in configuring their own kernel from scratch.package maintained by the
Architecture dependent kernels
is patched to run best on specific architectures. It also contains some of the patches for hardware and features support from the other patch sets mentioned above and below.
Unsupported kernel packages
Now to briefly describe some of the other sys-kernel/*-sources which scrolled by when the emerge -s "%@^sys-kernel/.*-sources" command was run below we discuss each one of them individually. These kernels are provided as a courtesy only — the various patch sets are not supported by the Gentoo kernel team. There is no specific preference to one source or another, so we review the kernel sources in alphabetical order.
usermode-sources are the User Mode Linux kernel patches and can be found in the http://user-mode-linux.sourceforge.net.package. These kernel patches are designed to allow Linux to recursively run within Linux. User Mode Linux is intended for testing and virtual server support. For more information about this amazing tribute to the stability and scalability of Linux, see
For more information on UML and Gentoo, read the Gentoo User-mode Linux Guide
Many Linux users will probably be familiar with the https://www.kernel.org/. Please note that the Gentoo kernel team does not patch vanilla-sources at all; they are for people who wish to run a completely unmodified Linux kernel. The Gentoo kernel team recommends instead.package. These kernels are copies of the official kernel sources released on
Versions of the kernel can be found under this package: 3.x, 4.x.
Previously provided kernel packages
aa-sources was a heavily modified kernel with all kinds of patches. The upstream maintainer stopped releasing kernel patchsets and subsequently this package has been removed.
alpha-sources was a 2.4 kernel with patches applied to improve hardware compatibility for the Alpha architecture. These patches have been developed and are now included in the mainline kernel. Alpha users can run any recent kernel with no need for extra patches.
Architecture dependent kernels
cell-sources was a 2.6 kernel designed to run on the Sony PlayStation 3 game console.
The aufs-sources package contains full kernel sources including the official genpatchset (found in gentoo-sources) for the 4.14/4.19 kernel tree and aufs4 support. This kernel is useful when attempting to utilize the aufs4 filesystem. For more information see the aufs page on Sourceforge or the genpatches homepage.
ck-sources is Con Kolivas's kernel patch set. This patchset is primarily designed to improve system responsiveness and interactivity and is configurable for varying workloads (from servers to desktops). The patchset includes a different scheduler, MuQSS, designed to keep systems responsive and smooth even when under heavy load. Support and information is available here and in the
#ck channel on irc.oftc.net.
gentoo-dev-sources, a 2.6 kernel patched with bug, security, and stability fixes, can now be found under the gentoo-sources package.
The grsec-sources kernel source used to be patched with the latest grsecurity updates (grsecurity version 2.0 and up) which included, amongst other security-related patches, support for PaX. Grsecurity patches are included in the hardened-sources kernel, so this package is no longer available in Portage.
As of August 27th, 2017, due to grsecurity limiting access to their patches, hardened-sources will be masked and eventually no longer available in Gentoo. See the full enews item here.
This kernel provides powerful patches for enhanced security. Please read the introduction to Hardened Gentoo article before using it.
hardened-dev-sources can now be found under the hardened-sources package.
hppa-sources was a 2.6 kernel with patches applied to improve hardware compatibility for the HPPA architecture. These patches have been developed and included in the mainline kernel. HPPA users can now run any recent kernel with no need for extra patches.
The mm-sources were based on vanilla-sources and contained Andrew Morton's patch set. They included the experimental and bleeding-edge features that were going to be included in the official kernel (or were going to be rejected because they set systems on fire!). They were known to be always moving at a fast pace and could change radically from one week to the other; kernel hackers often used mm-sources as a testing ground for highly experimental stuff. They have since been removed from the Portage tree.
OpenVZ is a server virtualization solution built on Linux. OpenVZ creates isolated, secure virtual private servers (VPSs) or virtual environments on a single physical server enabling better server utilization and ensuring that applications do not conflict. For more information, see https://openvz.org/.
The rsbac-dev-sources kernels could be found under the sys-kernel/rsbac-sources package.
Back in the days of 2.6-based kernels sys-kernel/rsbac-sources contained patches to use Rule Set Based Access Controls (RSBAC). It was removed due to lack of maintainers, but has has magically reappeared with the 3.10 kernel series. Use hardened-sources if additional security features are needed.
selinux-sources, a 2.4 kernel including lots of security enhancements, has been obsoleted by security development in the 2.6 kernel tree. SELinux functionality can be found in the hardened-sources package.
sh-sources was a 2.6 kernel with patches applied to improve hardware compatibility for the SuperH architecture. These patches have been developed and included in the mainline kernel. SuperH users can now run any recent kernel with no need for extra patches.
sparc-sources was a 2.4 kernel with patches applied to improve hardware compatibility for the SPARC architecture. These patches have been developed and included in the mainline kernel. SPARC users can now run any recent kernel with no need for extra patches.
tuxonice-sources has been last-rited, see .
The sys-kernel/suspend2-sources) are patched with both genpatches which includes the patches found in gentoo-sources, and the patches found in TuxOnIce which are an improved implementation of suspend-to-disk for the Linux kernel, formerly known as suspend2.(formerly
The uclinux-sources are meant for CPUs without MMUs as well as embedded devices. For more information, see http://www.uclinux.org. Lack of security patches as well as hardware to test on were the reasons this package is no longer found in the Portage tree.
win4lin-sources were patched to support the userland win4lin tools that allowed Linux users to run many Microsoft Windows (TM) applications at almost native speeds. These kernel sources were removed due to security issues.
xbox-sources sources for the Xbox Linux kernel
xen-sources was a 2.6-based kernel that allowed running multiple operating systems on a single physical system. A user could create virtual environments in which one or more guest operating systems could run on a Xen-powered host operating system.
The xen-sources patches were incorporated into the mainline Linux kernel as of version 3.0.
For more information on working with Xen and Gentoo, read the Xen article here on the wiki.
- Kernel upgrade guide
- The Gentoo Handbook
This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Brandon Low, Daniel Drake, Carl Anderson, Jorge Paulo, Benny Chuang, Gregorio Guidi, Shyam Mani, Joshua Saddler
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.