Razer Blade Pro (2019)

From Gentoo Wiki
Jump to: navigation, search

This page is a work in progress.


Prologue

This is a quick braindump of what was learnt during installation of Gentoo on a mid-2019 Razer Blade Pro 17 FHD. Some of it may be applicable to other Razer laptops from 2018/2019. Some of it may not apply to the reader's situation at all. Some of it may reflect the author's taste and habits.


BIOS/Firmware

If BIOS version 1.02 is installed, hold off upgrading a few seconds. There may exist a possibility to unlock a fair amount of options in the BIOS which may or may not be permanently hidden and locked, with later BIOS versions. This requires installing a modified BIOS, and installing a modified BIOS may or may not break your warranty (and your laptop). This section may possibly be expanded.


Booting the Gentoo Minimal ISO

Some quick notes:

Please disable Fast Boot. First in Windows, then shut down and do the same in the BIOS. (Hit F1 immediately/repeatedly after power on.) This is to limit the possibility that your Windows install becomes corrupted while we play around with stuff.

While in the BIOS, also disable Secure Boot, so booting from USB becomes possible. (If CSM also must be enabled is uncertain. If so, the interesting key to whack during POST becomes F12.)

The RBP17 has a spare M.2 slot. The BIOS will happily list EFI entries from one EFI partition on each boot medium. This permits having an untouched original NVME with the Windows install intact, and another device dedicated to Gentoo on the other. You will need a spare M.2 NVME device and a T5 Torx screwdriver. A heat transfer pad for the new NVME device is recommended, but not strictly required. Have a clean, dry, soft and well lit surface prior to opening the device. Take care not to scratch your brand new laptop, and make sure you know exactly where you put the screws.

The Gentoo Minimal ISO does not (at the time of writing) result in functional networking. (Neither wifi nor ethernet) Boot the installer with a well known usb wifi adapter plugged into the laptop for installing. Then grab a 5.4 kernel or better during installation.

UEFI boot from USB follows the same recipe for partitioning/GRUB as below.


Storage

Block storage is named /dev/nvme*something. No /dev/sda anymore.


Card reader

Unsure if supported by in-kernel driver yet.


Audio

A driver option is required for the HDA audio. Otherwise, the speakers will be mute.

FILE /etc/modprobe.d/alsa.conf
options snd-hda-intel model=alc298-spk-volume


Graphics

This is a working /etc/X11/xorg.conf, for use with x11-drivers/nvidia-drivers:

FILE /etc/X11/xorg.conf
Section "ServerLayout"
  Identifier "layout"
  Option "AllowNVIDIAGPUScreens"
  Screen 0 "iGPU"
EndSection

Section "Device"
  Identifier "iGPU"
  Driver "intel"
  Option "TearFree" "true"
  Option "AccelMethod" "sna"
  Option "DRI" "3"
EndSection

Section "DRI"
    Group "video"
    Mode 0666
EndSection

Section "Extensions"
    Option "Composite" "Enable"
    Option "RENDER" "Enable"
EndSection

Section "Screen"
  Identifier "iGPU"
  Device "iGPU"
EndSection

Section "Device"
  Identifier "nvidia"
  Driver "nvidia"
EndSection

Hybrid graphics not yet verified. HDMI graphics/audio not yet verified.


Wifi

Use driver iwlwifi. Make sure latest linux-firmware is installed.


Ethernet

Realtek 8125 is supported by r8169 in kernel 5.4.0-rc7, possibly a few rcs earlier.


Bluetooth

I believe this is part of the AX200 chip, but requires the btusb driver and appropriate firmware (intel/ibt-20-1-3.sfi, part of linux-firmware). Appears to work.

Keyboard

Audio control keys are exposed as both ACPI events and X11 keys. Ditto display backlight brightness. A Desktop Environment of choice may have prebuilt support for this. Do not make use of both mechanisms at the same time.

ACPI key events works independently of X11, but it is necessary to edit the relevant config file(s) for acpid.

Keyboard backlight keys works with no driver. This section to be expanded.


Touchpad

Rumor has it a certain minimum BIOS version for the touchpad is needed to work out of the box. This is a working /etc/X11/xorg.conf.d/70-synaptics.conf :

FILE /etc/X11/xorg.conf.d/70-synaptics.conf
Section "InputClass"
 Identifier "User options"
 MatchDriver "synaptics"
 MatchIsTouchpad "yes"
 Option "HorizHysteresis" "15"
 Option "VertHysteresis" "15"
 Option "CoastingSpeed" "10"
 Option "CoastingFriction" "40"
 Option "VertScrollDelta" "50"
 Option "HorizScrollDelta" "50"
EndSection


Sensors

user $sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +45.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +45.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +45.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +44.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +44.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +45.0°C  (high = +100.0°C, crit = +100.0°C)
Core 5:        +44.0°C  (high = +100.0°C, crit = +100.0°C)

BAT0-acpi-0
Adapter: ACPI interface
in0:          17.42 V  
curr1:         0.00 A  

pch_cannonlake-virtual-0
Adapter: Virtual device
temp1:        +51.0°C  

iwlwifi-virtual-0
Adapter: Virtual device
temp1:        +46.0°C  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C 

Support for reading NVME temperatures comes in kernel 5.5. For now, use smartmontools or nvme-cli.


GRUB and UEFI

The installation handbook has plenty more [[details about GRUB and UEFI]]. The tl;dr version below deviates slightly from instructions in the link above.

  • Have a GPT partitioned NVME. (gdisk does the trick)
  • First partition should be of the order 100-200MB, type ef00.
  • Add swap, root (/) and /home partitions according to taste.
  • Format first partition as VFAT. (mkfs.vfat -F 32 /dev/nvme1n1p1verifythis )
  • mkswap for swap partition, mkfs.ext4 or mkfs.somethingelse for root and home.
  • Add partitions to /etc/fstab, first partition as '/boot'.
  • Execute:
root #mount /boot
root #mkdir /boot/grub
root #grub-install --efi-directory=/boot

Verify that /boot/grub and /boot/EFI got a number of files and directories present.

Add the following lines to /etc/default/grub:

FILE /etc/default/grub
GRUB_GFXMODE=1920x1080x32
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_THEME="/boot/grub/themes/starfield/theme.txt"
GRUB_DISABLE_LINUX_UUID=true

Now build a kernel, place it in /boot/, and ensure it is named vmlinux-*, vmlinux-* or kernel-*. Finally, create the GRUB2-config file:

root #grub-mkconfig -o /boot/grub/grub.cfg

Hardware

Select kernel config options for homecooked kernels

For a manual kernel configuration, a likely incomplete selection of relevant kernel config options follows:

KERNEL
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_R8169=y
CONFIG_IWLWIFI=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=y
CONFIG_IWLMVM=y
CONFIG_HID_MULTITOUCH=m
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PCIEPORTBUS=y
CONFIG_DRM_I915=m
CONFIG_INTEL_PCH_THERMAL=y
CONFIG_USB_XHCI_HCD=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_SATA_AHCI=y
CONFIG_I2C_I801=m
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_I2C_SMBUS=m
CONFIG_THUNDERBOLT=y

To be expanded...


lsusb

user $lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 1532:0234 Razer USA, Ltd Razer Blade
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 13d3:56d5 IMC Networks Integrated Camera
Bus 001 Device 004: ID 8087:0029 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


lspci -k

user $lspci -k
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. 8th Gen Core Processor Host Bridge/DRAM Registers
	Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)
	Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Mobile)
	DeviceName: Onboard - Video
	Subsystem: Razer USA Ltd. UHD Graphics 630 (Mobile)
	Kernel driver in use: i915
	Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 07)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH Thermal Controller
	Kernel driver in use: intel_pch_thermal
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH USB 3.1 xHCI Host Controller
	Kernel driver in use: xhci_hcd
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH Shared SRAM
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH Serial IO I2C Controller
	Kernel driver in use: intel-lpss
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH HECI Controller
	Kernel driver in use: mei_me
00:17.0 SATA controller: Intel Corporation Cannon Lake Mobile PCH SATA AHCI Controller (rev 10)
	DeviceName: Onboard - SATA
	Subsystem: Razer USA Ltd. Cannon Lake Mobile PCH SATA AHCI Controller
	Kernel driver in use: ahci
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0)
	Kernel driver in use: pcieport
00:1b.4 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 (rev f0)
	Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
	Kernel driver in use: pcieport
00:1d.5 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #14 (rev f0)
	Kernel driver in use: pcieport
00:1d.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #15 (rev f0)
	Kernel driver in use: pcieport
00:1d.7 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #16 (rev f0)
	Kernel driver in use: pcieport
00:1e.0 Communication controller: Intel Corporation Device a328 (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Device 3000
	Kernel driver in use: intel-lpss
00:1f.0 ISA bridge: Intel Corporation Device a30d (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Device 3000
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
	DeviceName: Onboard - Sound
	Subsystem: Razer USA Ltd. Cannon Lake PCH cAVS
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH SMBus Controller
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
	DeviceName: Onboard - Other
	Subsystem: Razer USA Ltd. Cannon Lake PCH SPI Controller
01:00.0 VGA compatible controller: NVIDIA Corporation TU106M [GeForce RTX 2070 Mobile] (rev a1)
	Subsystem: Razer USA Ltd. TU106M [GeForce RTX 2070 Mobile]
	Kernel modules: nvidia_drm, nvidia
02:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
	Kernel driver in use: pcieport
03:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
	Kernel driver in use: pcieport
03:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
	Kernel driver in use: pcieport
03:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
	Kernel driver in use: pcieport
04:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018] (rev 06)
	Subsystem: Razer USA Ltd. JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018]
	Kernel driver in use: thunderbolt
43:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018] (rev 06)
	Subsystem: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018]
	Kernel driver in use: xhci_hcd
44:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
	Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
	Kernel driver in use: nvme
45:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
	Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
	Kernel driver in use: nvme
46:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8125
	Subsystem: Razer USA Ltd. Device 3000
	Kernel driver in use: r8169
47:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5260 PCI Express Card Reader (rev 01)
	Subsystem: Razer USA Ltd. RTS5260 PCI Express Card Reader
48:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
	Subsystem: Intel Corporation Wi-Fi 6 AX200
	Kernel driver in use: iwlwifi


dmidecode

user $dmidecode
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.2.0 present.
Table at 0x3C9A9000.

Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
	Vendor: Razer
	Version: 1.02
	Release Date: 05/16/2019
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 16 MB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
		UEFI is supported
	BIOS Revision: 1.2
	Firmware Revision: 1.0

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: Razer
	Product Name: Blade Pro 17 (2019)
	Version: 2.04
	Serial Number: BYXXXXXXXXXXXXXXXXXX
	UUID: YYYYYYYYYY-3637-6131-6235-XXXXXXXXXXXXXXXXX
	Wake-up Type: Power Switch
	SKU Number: RZ09-02877N92
	Family: 1A583000 Razer Blade Pro 17

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
	Manufacturer: Razer
	Product Name: DA720
	Version:  
	Serial Number:  
	Asset Tag:  
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis:  
	Chassis Handle: 0x0003
	Type: Motherboard
	Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
	Manufacturer: Razer
	Type: Notebook
	Lock: Not Present
	Version:  
	Serial Number:  
	Asset Tag:  
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00000000
	Height: Unspecified
	Number Of Power Cords: 1
	Contained Elements: 0
	SKU Number:  

Handle 0x0004, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FFH
	Internal Connector Type: None
	External Reference Designator: USB3
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0005, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FFH
	Internal Connector Type: None
	External Reference Designator: EXT HDMI
	External Connector Type: None
	Port Type: Other

Handle 0x0006, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FFH
	Internal Connector Type: None
	External Reference Designator: USB-C Thunderbolt
	External Connector Type: None
	Port Type: Other

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FFH
	Internal Connector Type: None
	External Reference Designator: Audio Jack
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FFH
	Internal Connector Type: None
	External Reference Designator: LAN
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FFH
	Internal Connector Type: None
	External Reference Designator: SD-Card
	External Connector Type: None
	Port Type: Other

Handle 0x000A, DMI type 9, 17 bytes
System Slot Information
	Designation: J6B2
	Type: x16 PCI Express
	Current Usage: In Use
	Length: Long
	ID: 0
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:01.0

Handle 0x000B, DMI type 9, 17 bytes
System Slot Information
	Designation: J6B1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 1
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.3

Handle 0x000C, DMI type 9, 17 bytes
System Slot Information
	Designation: J6D1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 2
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.4

Handle 0x000D, DMI type 9, 17 bytes
System Slot Information
	Designation: J7B1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 3
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.5

Handle 0x000E, DMI type 9, 17 bytes
System Slot Information
	Designation: J8B4
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 4
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.6

Handle 0x000F, DMI type 10, 6 bytes
On Board Device Information
	Type: Video
	Status: Enabled
	Description:    To Be Filled By O.E.M.

Handle 0x0010, DMI type 11, 5 bytes
OEM Strings
	String 1: 0
	String 2:  
	String 3:  
	String 4:  
	String 5:  
	String 6:  
	String 7:  
	String 8:  

Handle 0x0011, DMI type 12, 5 bytes
System Configuration Options
	Option 1:  

Handle 0x0012, DMI type 32, 20 bytes
System Boot Information
	Status: No errors detected

Handle 0x0013, DMI type 34, 11 bytes
Management Device
	Description: LM78-1
	Type: LM78
	Address: 0x00000000
	Address Type: I/O Port

Handle 0x0014, DMI type 26, 22 bytes
Voltage Probe
	Description: LM78A
	Location: Motherboard
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0015, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0016, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x0013
	Component Handle: 0x0014
	Threshold Handle: 0x0015

Handle 0x0017, DMI type 28, 22 bytes
Temperature Probe
	Description: LM78A
	Location: Motherboard
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0018, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0019, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x0013
	Component Handle: 0x0017
	Threshold Handle: 0x0018

Handle 0x001A, DMI type 27, 15 bytes
Cooling Device
	Temperature Probe Handle: 0x0017
	Type: Power Supply Fan
	Status: OK
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating
	Description: Cooling Dev 1

Handle 0x001B, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x001C, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x0013
	Component Handle: 0x001A
	Threshold Handle: 0x001B

Handle 0x001D, DMI type 27, 15 bytes
Cooling Device
	Temperature Probe Handle: 0x0017
	Type: Power Supply Fan
	Status: OK
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating
	Description: Not Specified

Handle 0x001E, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x001F, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x0013
	Component Handle: 0x001D
	Threshold Handle: 0x001E

Handle 0x0020, DMI type 29, 22 bytes
Electrical Current Probe
	Description: ABC
	Location: Motherboard
	Status: OK
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0021, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x0022, DMI type 35, 11 bytes
Management Device Component
	Description: Default string
	Management Device Handle: 0x0013
	Component Handle: 0x0020
	Threshold Handle: 0x0021

Handle 0x0023, DMI type 39, 22 bytes
System Power Supply
	Power Unit Group: 1
	Location:  
	Name:  
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Model Part Number:  
	Revision:  
	Max Power Capacity: 0 W
	Status: Not Present
	Type: <OUT OF SPEC>
	Input Voltage Range Switching: <OUT OF SPEC>
	Plugged: Yes
	Hot Replaceable: No

Handle 0x0024, DMI type 16, 23 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 32 GB
	Error Information Handle: Not Provided
	Number Of Devices: 2

Handle 0x0027, DMI type 19, 31 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x003FFFFFFFF
	Range Size: 16 GB
	Physical Array Handle: 0x0024
	Partition Width: 2

Handle 0x0028, DMI type 43, 31 bytes
TPM Device
	Vendor ID: CTNI
	Specification Version: 2.0	Firmware Revision: 403.1
	Description: INTEL	Characteristics:
		Family configurable via platform software support
	OEM-specific Information: 0x00000000

Handle 0x0029, DMI type 221, 26 bytes
OEM-specific Type
	Header and Data:
		DD 1A 29 00 03 01 00 07 00 5C 50 00 02 00 00 00
		00 B4 00 03 00 01 05 00 00 00
	Strings:
		Reference Code - CPU
		uCode Version
		TXT ACM version

Handle 0x002A, DMI type 221, 26 bytes
OEM-specific Type
	Header and Data:
		DD 1A 2A 00 03 01 00 07 00 5C 50 00 02 00 0C 00
		00 0A 00 03 04 0C 00 26 96 05
	Strings:
		Reference Code - ME
		MEBx version
		ME Firmware Version
		Consumer SKU

Handle 0x002B, DMI type 221, 82 bytes
OEM-specific Type
	Header and Data:
		DD 52 2B 00 0B 01 00 07 00 5C 50 00 02 03 FF FF
		FF FF FF 04 00 FF FF FF 10 00 05 00 FF FF FF 10
		00 06 00 FF FF FF FF FF 07 00 02 00 00 00 00 08
		00 09 00 00 00 00 09 00 0A 00 00 00 00 0A 00 07
		00 00 00 00 0B 00 06 00 00 00 00 0C 00 07 00 00
		00 00
	Strings:
		Reference Code - CNL PCH
		PCH-CRID Status
		Disabled
		PCH-CRID Original Value
		PCH-CRID New Value
		OPROM - RST - RAID
		CNL PCH H A0 Hsio Version
		CNL PCH H Ax Hsio Version
		CNL PCH H Bx Hsio Version
		CNL PCH LP B0 Hsio Version
		CNL PCH LP Bx Hsio Version
		CNL PCH LP Dx Hsio Version

Handle 0x002C, DMI type 221, 54 bytes
OEM-specific Type
	Header and Data:
		DD 36 2C 00 07 01 00 07 00 5C 50 00 02 00 00 07
		01 67 00 03 00 07 00 5C 50 00 04 05 FF FF FF FF
		FF 06 00 00 00 00 07 00 07 00 00 00 00 07 00 08
		00 FF FF FF FF FF
	Strings:
		Reference Code - SA - System Agent
		Reference Code - MRC
		SA - PCIe Version
		SA-CRID Status
		Disabled
		SA-CRID Original Value
		SA-CRID New Value
		OPROM - VBIOS

Handle 0x002D, DMI type 221, 12 bytes
OEM-specific Type
	Header and Data:
		DD 0C 2D 00 01 01 00 04 00 00 00 00
	Strings:
		FSP Binary Version

Handle 0x002E, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L1 Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 384 kB
	Maximum Size: 384 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Parity
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x002F, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L2 Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 1536 kB
	Maximum Size: 1536 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 4-way Set-associative

Handle 0x0030, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L3 Cache
	Configuration: Enabled, Not Socketed, Level 3
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 12288 kB
	Maximum Size: 12288 kB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Multi-bit ECC
	System Type: Unified
	Associativity: 16-way Set-associative

Handle 0x0031, DMI type 4, 48 bytes
Processor Information
	Socket Designation: U3E1
	Type: Central Processor
	Family: Core i7
	Manufacturer: Intel(R) Corporation
	ID: EA 06 09 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 158, Stepping 10
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Multi-threading)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
	Voltage: 0.8 V
	External Clock: 100 MHz
	Max Speed: 8300 MHz
	Current Speed: 2475 MHz
	Status: Populated, Enabled
	Upgrade: Socket BGA1440
	L1 Cache Handle: 0x002E
	L2 Cache Handle: 0x002F
	L3 Cache Handle: 0x0030
	Serial Number:  
	Asset Tag:  
	Part Number:  
	Core Count: 6
	Core Enabled: 6
	Thread Count: 12
	Characteristics:
		64-bit capable
		Multi-Core
		Hardware Thread
		Execute Protection
		Enhanced Virtualization
		Power/Performance Control

Handle 0x0039, DMI type 248, 17 bytes
OEM-specific Type
	Header and Data:
		F8 11 39 00 00 02 69 00 01 4F 45 4D 57 49 46 49
		00

Handle 0x003A, DMI type 17, 84 bytes
Memory Device
	Array Handle: 0x0024
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 8192 MB
	Form Factor: SODIMM
	Set: None
	Locator: ChannelA-DIMM0
	Bank Locator: BANK 0
	Type: DDR4
	Type Detail: Synchronous
	Speed: 2667 MT/s
	Manufacturer: Samsung
	Serial Number: NNNNNNNN
	Asset Tag: AAAAAAAAAA
	Part Number: M471A1K43CB1-CTD    
	Rank: 1
	Configured Memory Speed: 2667 MT/s
	Minimum Voltage: 1.2 V
	Maximum Voltage: 1.2 V
	Configured Voltage: 1.2 V
	Memory Technology: DRAM
	Memory Operating Mode Capability: Volatile memory
	Firmware Version: Not Specified
	Module Manufacturer ID: Bank 1, Hex 0xCE
	Module Product ID: Unknown
	Memory Subsystem Controller Manufacturer ID: Unknown
	Memory Subsystem Controller Product ID: Unknown
	Non-Volatile Size: None
	Volatile Size: 8 GB
	Cache Size: None
	Logical Size: None

Handle 0x003B, DMI type 17, 84 bytes
Memory Device
	Array Handle: 0x0024
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 8192 MB
	Form Factor: SODIMM
	Set: None
	Locator: ChannelB-DIMM0
	Bank Locator: BANK 2
	Type: DDR4
	Type Detail: Synchronous
	Speed: 2667 MT/s
	Manufacturer: Samsung
	Serial Number: GGGGGGGGGG
	Asset Tag: BBBBBBBBB
	Part Number: M471A1K43CB1-CTD    
	Rank: 1
	Configured Memory Speed: 2667 MT/s
	Minimum Voltage: 1.2 V
	Maximum Voltage: 1.2 V
	Configured Voltage: 1.2 V
	Memory Technology: DRAM
	Memory Operating Mode Capability: Volatile memory
	Firmware Version: Not Specified
	Module Manufacturer ID: Bank 1, Hex 0xCE
	Module Product ID: Unknown
	Memory Subsystem Controller Manufacturer ID: Unknown
	Memory Subsystem Controller Product ID: Unknown
	Non-Volatile Size: None
	Volatile Size: 8 GB
	Cache Size: None
	Logical Size: None

Handle 0x003C, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x001FFFFFFFF
	Range Size: 8 GB
	Physical Device Handle: 0x003A
	Memory Array Mapped Address Handle: 0x0027
	Partition Row Position: Unknown
	Interleave Position: 1
	Interleaved Data Depth: 1

Handle 0x003D, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00200000000
	Ending Address: 0x003FFFFFFFF
	Range Size: 8 GB
	Physical Device Handle: 0x003B
	Memory Array Mapped Address Handle: 0x0027
	Partition Row Position: Unknown
	Interleave Position: 2
	Interleaved Data Depth: 1

Handle 0x003E, DMI type 130, 20 bytes
OEM-specific Type
	Header and Data:
		82 14 3E 00 24 41 4D 54 00 00 00 00 00 A5 AF 02
		C0 00 00 00

Handle 0x003F, DMI type 131, 64 bytes
OEM-specific Type
	Header and Data:
		83 40 3F 00 31 00 00 00 0C 00 00 00 00 00 0A 00
		F8 00 0D A3 00 00 00 00 01 00 00 00 00 00 0C 00
		96 05 26 00 00 00 00 00 FE 00 FF FF 00 00 00 00
		00 00 00 00 22 00 00 00 76 50 72 6F 00 00 00 00

Handle 0x0040, DMI type 13, 22 bytes
BIOS Language Information
	Language Description Format: Long
	Installable Languages: 1
		en|US|iso8859-1
	Currently Installed Language: en|US|iso8859-1

Handle 0x0041, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:00:00.0

Handle 0x0042, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Video
	Type: Video
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:00:02.0

Handle 0x0043, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 2
	Bus Address: 0000:00:04.0

Handle 0x0044, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 3
	Bus Address: 0000:00:12.0

Handle 0x0045, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 4
	Bus Address: 0000:00:14.0

Handle 0x0046, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 5
	Bus Address: 0000:00:14.2

Handle 0x0047, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 6
	Bus Address: 0000:00:15.0

Handle 0x0048, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 7
	Bus Address: 0000:00:16.0

Handle 0x0049, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - SATA
	Type: SATA Controller
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:00:17.0

Handle 0x004A, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 8
	Bus Address: 0000:00:1e.0

Handle 0x004B, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 9
	Bus Address: 0000:00:1f.0

Handle 0x004C, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Sound
	Type: Sound
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:00:1f.3

Handle 0x004D, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 10
	Bus Address: 0000:00:1f.4

Handle 0x004E, DMI type 41, 11 bytes
Onboard Device
	Reference Designation: Onboard - Other
	Type: Other
	Status: Enabled
	Type Instance: 11
	Bus Address: 0000:00:1f.5

Handle 0x004F, DMI type 221, 89 bytes
OEM-specific Type
	Header and Data:
		DD 59 4F 00 0C 01 00 FF FF FF FF FF 02 00 FF FF
		FF FF FF 03 04 FF FF FF FF FF 05 06 FF FF FF FF
		FF 07 08 FF FF FF FF FF 09 00 00 00 00 00 00 0A
		00 FF FF FF FF FF 0B 00 01 00 00 00 00 0C 00 00
		09 00 85 10 0D 0E 01 04 03 00 00 0F 00 00 07 00
		00 00 10 00 00 02 00 0E 00
	Strings:
		Lan Phy Version
		Sensor Firmware Version
		Debug Mode Status
		Disabled
		Performance Mode Status
		Disabled
		Debug Use USB(Disabled:Serial)
		Disabled
		ICC Overclocking Version
		UNDI Version
		EC FW Version
		GOP Version
		Royal Park Version
		BP1.4.3.0_RP03
		Platform Version
		Client Silicon Version

Handle 0x0050, DMI type 136, 6 bytes
OEM-specific Type
	Header and Data:
		88 06 50 00 00 00

Handle 0x0051, DMI type 14, 23 bytes
Group Associations
	Name: Firmware Version Info
	Items: 6
		0x0029 (OEM-specific)
		0x002A (OEM-specific)
		0x002B (OEM-specific)
		0x002C (OEM-specific)
		0x002D (OEM-specific)
		0x004F (OEM-specific)

Handle 0x0052, DMI type 14, 8 bytes
Group Associations
	Name: $MEI
	Items: 1
		0x0000 (OEM-specific)

Handle 0x0053, DMI type 219, 106 bytes
OEM-specific Type
	Header and Data:
		DB 6A 53 00 01 04 01 45 02 00 90 06 01 10 86 20
		00 00 00 00 48 00 00 00 00 00 00 06 00 40 40 02
		FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
		FF FF FF FF FF FF FF FF 03 00 00 00 80 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00
	Strings:
		MEI1
		MEI2
		MEI3
		MEI4

Handle 0x0054, DMI type 127, 4 bytes
End Of Table