equery is a tool to make several common Portage operations simpler. Among other operations, it can display package dependencies, metadata, and installed files.
equery is part of gentoolkit.
Equery is part of a toolset installed with the app-portage/gentoolkit package:
emerge --ask app-portage/gentoolkit
For more information on installing equery or other tools visit the Gentoolkit article.
equery is a tool that displays useful information about the installed packages on the system. equery is based on a system of modules. Every module has a shorthand name. For example, running equery l gcc is the same as running equery list gcc. Invoking the
--help option (equery --help) will output global options and list all available modules and their shorthand names. Adding a module name to the end (equery --help module) will display the help screen for that specific module. Lastly, executing man equery will also provide a detailed explanation of all available modules and options along with some useful examples.
Below is a list of features that work over the majority of modules.
equery --quiet list gcc
equery --quiet list sys-devel/gcc
equery --quiet list '>=sys-devel/gcc-4'
Like emerge, equery does not understand partial package names:
equery check zilla
!!! No package found matching zilla
Unlike emerge, equery can accept shell-like globbing in the category and/or package name:
equery check '*zilla*'
* Checking www-client/mozilla-firefox-3.0.14 ... 90 out of 90 files passed
equery check 'www-c*/*'
* Checking www-client/links-2.2 ... 30 out of 30 files passed * Checking www-client/mozilla-firefox-3.0.14 ... 90 out of 90 files passed
Most equery modules take multiple input:
equery hasuse sse sse2
* Searching for USE flag sse ... [IP-] [ ] media-libs/flac-1.2.1-r3 (0) [IP-] [ ] media-libs/speex-1.2_beta3_p2 (0) * Searching for USE flag sse2 ... [IP-] [ ] dev-libs/openssl-0.9.8k (0) [IP-] [ ] x11-libs/pixman-0.16.0 (0)
A few modules also allow full regular expressions:
equery -q list --portage-tree --full-regex '[kr]?flickr.*'
dev-dotnet/flickrnet-bin-2.2 dev-ruby/flickr-1.0.2-r1 dev-ruby/flickr-1.0.2-r2 dev-ruby/rflickr-20060201 media-gfx/kflickr-0.6 [...]
Globbing support replaced a number of older options in equery. For example, to act on all packages in a certain set, use a
'*'(asterisk). To act on all packages in a category, use
Do not forget to quote input when using special shell characters like asterisks or greater than/less than signs.
The next few sections in this document give a quick introduction to the different equery modules.
To see a list of all equery's capabilities, simply run it without arguments:
Gentoo package query tool Usage: equery [global-options] module-name [module-options] modules (short name) (b)elongs list what package FILES belong to chec(k) verify checksums and timestamps for PKG (d)epends list all packages directly depending on ATOM dep(g)raph display a tree of all dependencies for PKG (f)iles list all files installed by PKG h(a)s list all packages for matching ENVIRONMENT data stored in /var/db/pkg (h)asuse list all packages that have USE flag ke(y)words display keywords for specified PKG (l)ist list package matching PKG (m)eta display metadata about PKG (s)ize display total size of all files owned by PKG (u)ses display USE flags for PKG (w)hich print full path to ebuild for PKG
As of 2023-01-27, the keywords module is not documented in the equery(1) man page - cf. bug #565408. However, a description is provided below. The keywords module is documented in its alias command eshowkw(1) man page.
A common approach to working with equery is to create aliases. When using bash these can usually be placed in the ~/.bashrc file:
alias eqf='equery f' alias equ='equery u' alias eqh='equery h' alias eqa='equery a' alias eqb='equery b' alias eql='equery l' alias eqd='equery d' alias eqg='equery g' alias eqk='equery k' alias eqm='equery m' alias eqy='equery y' alias eqs='equery s' alias eqw='equery w'
Finding the package that a file came from with belongs (b)
equery belongs -e /usr/bin/glxgears
* Searching for /usr/bin/glxgears ... x11-apps/mesa-progs-7.5.1 (/usr/bin/glxgears)
belongs can search for files matching a regular expression with the
-f option. The
-e option stops searching after it finds a match. Since no file on your system should be owned by two packages, this is a safe optimization.
A short version of
b) can also be used. For example, to list what package equery belongs to:
equery b equery
* Searching for equery ... app-portage/gentoolkit-0.3.0.8-r2 (/usr/lib/python-exec/python2.7/equery) app-portage/gentoolkit-0.3.0.8-r2 (/usr/lib64/python3.3/site-packages/gentoolkit/test/equery) app-portage/gentoolkit-0.3.0.8-r2 (/usr/bin/equery -> ../lib/python-exec/python-exec2) app-portage/gentoolkit-0.3.0.8-r2 (/usr/lib64/python2.7/site-packages/gentoolkit/equery) app-portage/gentoolkit-0.3.0.8-r2 (/usr/lib/python-exec/python3.3/equery) app-portage/gentoolkit-0.3.0.8-r2 (/usr/lib64/python2.7/site-packages/gentoolkit/test/equery) app-portage/gentoolkit-0.3.0.8-r2 (/usr/lib64/python3.3/site-packages/gentoolkit/equery)
Verifying package integrity with check (k)
Sometimes it is useful to check a package's integrity. equery can verify MD5 sums as well as timestamps to indicate when a package might have been corrupted, replaced, or removed.
equery check gentoolkit
* Checking app-portage/gentoolkit-0.3.0_rc7 ... 71 out of 71 files passed
Listing all packages depending on a package with depends (d)
Ever wonder why a certain package has been installed on the system? equery can tell which packages list it as a dependency with
depends. Include indirect dependencies with the
equery depends pygtk
* Searching for pygtk ... app-admin/pessulus-2.24.0 (>=dev-python/pygtk-2.6.0) app-editors/gedit-2.24.3 (python ? >=dev-python/pygtk-2.12) dev-libs/libgweather-2.24.3 (python ? >=dev-python/pygtk-2) dev-python/gnome-python-base-2.22.3 (>=dev-python/pygtk-2.10.3) dev-python/gnome-python-desktop-base-2.24.1 (>=dev-python/pygtk-2.10.3) [...]
A second example lists all packages directly depending on udev:
equery d udev
sys-auth/consolekit-0.4.5_p20120320 (acl ? >=sys-fs/udev-146-r1) sys-fs/cryptsetup-1.4.1 (>=sys-fs/udev-124) (>=sys-fs/udev-182[static-libs]) (<=sys-fs/udev-171-r6) sys-fs/lvm2-2.02.88 (>=sys-fs/udev-151-r4) virtual/dev-manager-0 (sys-fs/udev) x11-libs/cairo-1.10.2-r2 (drm ? >=sys-fs/udev-136)
This output will include optional dependencies governed by USE flags, i.e.
(acl ? >=sys-fs/udev-146-r1)above, even if that USE flag is not active. A package would only be a dependency if that USE flag is active.
Getting dependency graphs with depgraph (g)
depgraph is the opposite of
depends. It will find all ebuilds that a given package depends on (not the ebuilds that depend on that package). When it finds a dependency, it will recursively search that package's dependencies. Control how deep the tree gets with the
equery depgraph mozilla-firefox
* Searching for mozilla-firefox ... * dependency graph for www-client/mozilla-firefox-184.108.40.206: `-- www-client/mozilla-firefox-220.127.116.11 `-- virtual/jre-1.6.0 (virtual/jre) [java] `-- virtual/jdk-1.6.0 (virtual/jdk-1.6.0*) `-- dev-java/icedtea6-bin (unable to resolve: package masked or removed) `-- dev-java/sun-jdk-18.104.22.168 `-- dev-java/java-sdk-docs-22.214.171.124 [doc] `-- app-arch/unzip-6.0-r1 `-- app-arch/bzip2-1.0.5-r1 [bzip2] `-- sys-libs/glibc-2.9_p20081201-r2 `-- sys-devel/gettext-0.17 [nls] `-- virtual/libiconv-0 (virtual/libiconv) [...]
jre is a direct dependency and
jdk is an indirect dependency if the
java USE is set?
Listing files installed by a package with files (f)
equery can list all the files installed by an ebuild with the
files module. Try
--tree to get an easy to read directory layout. Use
--filter to only find a certain type of file. For example, to find where executables were installed use
--filter=cmd, or to quickly find the configuration file location try
equery files --tree gentoolkit
* Searching for gentoolkit ... * Contents of app-portage/gentoolkit-0.3.0_rc7: /etc > /eclean + distfiles.exclude + packages.exclude > /env.d + 99gentoolkit-env > /revdep-rebuild + 99revdep-rebuild /usr > /bin + eclean + eclean-dist -> eclean + eclean-pkg -> eclean + epkginfo + equery + eread + euse + glsa-check + revdep-rebuild > /lib > /python2.6 > /site-packages > /gentoolkit + gentoolkit-0.3.0_rc7-py2.6.egg-info + __init__.py > /equery + __init__.py + belongs.py + changes.py + check.py + depends.py + depgraph.py + files.py [...]
Another example, to list all files installed by media-sound/ncmpcpp:
equery f ncmpcpp
* Searching for ncmpcpp ... * Contents of media-sound/ncmpcpp-0.5.10: /usr /usr/bin /usr/bin/ncmpcpp /usr/share /usr/share/bash-completion /usr/share/bash-completion/ncmpcpp /usr/share/doc /usr/share/doc/ncmpcpp-0.5.10 /usr/share/doc/ncmpcpp-0.5.10/AUTHORS.bz2 /usr/share/doc/ncmpcpp-0.5.10/NEWS.bz2 /usr/share/doc/ncmpcpp-0.5.10/config.bz2 /usr/share/doc/ncmpcpp-0.5.10/keys.bz2 /usr/share/man /usr/share/man/man1 /usr/share/man/man1/ncmpcpp.1.bz2
Descriptions of other modules and additional command line flags can be found in the equery man page (man equery).
Looking for packages that have a specific USE flag with hasuse (h)
hasuse can be used to find packages with a given USE flag.
hasuse will not indicate if the flag has been enabled or not; it simply outputs a list of ebuilds that have the queried flag as an option. See the EXAMPLES section of
hasuse in the equery man page for more tip on getting this kind of information.
equery hasuse qt3 qt4
* Searching for USE flag qt3 ... [IP-] [ ] app-crypt/pinentry-0.7.5 (0) [IP-] [ ] net-dns/avahi-0.6.24-r2 (0) [IP-] [ ] net-wireless/wpa_supplicant-0.6.9 (0) * Searching for USE flag qt4 ... [IP-] [ ] net-dns/avahi-0.6.24-r2 (0) [IP-] [ ] net-wireless/wpa_supplicant-0.6.9 (0)
Display keywords for specified package (y)
keywords can be used to display the keyword status of a package on various architectures.
equery keywords coreutils
Keywords for sys-apps/coreutils: | | u | | a a p s l r a | n | | m r h p p i o i s l m m | e u s | r | d a m p p c a x a o s 3 p 6 i | a s l | e | 6 r 6 p p 6 r 8 6 n c 9 h 8 p | p e o | p | 4 m 4 a c 4 c 6 4 g v 0 a k s | i d t | o ----------+-------------------------------+-------+------- 8.32-r1 | + + + + + + + + ~ o ~ ~ ~ ~ ~ | 7 # 0 | gentoo 9.1-r1 | + + + + + + + + ~ ~ ~ ~ ~ ~ ~ | 7 # | gentoo [I]9.1-r2 | + + + + + + + + ~ ~ ~ ~ ~ ~ ~ | 7 o | gentoo
+ indicates the package version is available on stable;
~ indicates its availability on testing; and
o indicates the package version is unavailable.
[I] indicates the package version currently installed.
Listing packages with list (l)
Listing all installed packages
The standard query will search installed packages for the given package name. Passing in
'*' displays all packages in the set:
equery list '*'
* Searching for * ... [IP-] [ ] app-admin/eselect-1.2.3 (0) [IP-] [ ] app-admin/eselect-ctags-1.10 (0) [IP-] [ ] app-admin/eselect-esd-20060719 (0) [IP-] [ ] app-admin/eselect-fontconfig-1.0 (0) [IP-] [ ] app-admin/eselect-opengl-1.0.8-r1 (0) [IP-] [ ] app-admin/eselect-python-20090824 (0) [IP-] [ ] app-admin/eselect-ruby-20081227 (0) [IP-] [ ] app-admin/eselect-vi-1.1.5 (0) [IP-] [ ] app-admin/perl-cleaner-1.05 (0) [IP-] [ ] app-admin/pessulus-2.24.0 (0) [IP-] [ ] app-admin/python-updater-0.7 (0) [IP-] [ ] app-admin/sudo-1.7.2_p1 (0) [...]
In the leftmost field it is possible to see all the above packages are
I(nstalled) and from the
P(ortage) tree. They are not masked (the second field is blank), and they are all installed in the default slot (0).
Listing packages available in ebuild repositories
Use local options to look for packages in the Portage tree and overlays: the
-p) option will include packages available from the Gentoo ebuild repository in the search, the
-o) option will include packages available in overlays (ebuild repositories) that are configured with Portage in the search:
equery list -po vim
* Searching for vim ... [-P-] [ ] app-editors/vim-7.0.235 (0) [-P-] [ ~] app-editors/vim-7.0.243 (0) [-P-] [ ] app-editors/vim-7.1.123 (0) [-P-] [ ~] app-editors/vim-7.1.330 (0) [-P-] [ ] app-editors/vim-7.2 (0) [-P-] [ ~] app-editors/vim-7.2.108 (0) [IP-] [ ] app-editors/vim-7.2.182 (0) [-P-] [ ~] app-editors/vim-7.2.238 (0) [-P-] [ ~] app-editors/vim-7.2.264 (0)
It is possible to see that version 7.2.182 is installed and that there are no versions available from an overlay. Users can see which versions are keyword masked by the
~ in the second field.
To only list available packages, excluding packages that are already installed, add the
Viewing package metadata with meta (m)
Each package in the Portage tree provides at least some metadata about its maintainer, etc. The amount of useful information depends on how much package maintainers decide to provide. With no options,
meta returns some basic useful information.
equery meta gnucash
* app-office/gnucash [gentoo] Maintainer: email@example.com (Torsten Veller) Upstream: None specified Location: /var/db/repos/gentoo/app-office/gnucash Keywords: 2.2.9-r1:0: alpha amd64 ppc sparc x86 Keywords: 2.2.9-r2:0: Keywords: 2.3.8:0: Keywords: 2.3.10:0: ~alpha ~amd64 ~ppc ~sparc ~x86
Some maintainers provide extra information about a package, which can be very useful:
equery meta --description emacs
* app-editors/emacs GNU Emacs is an extensible, customizable text editor - and more. At its core is an interpreter for Emacs Lisp, a dialect of the Lisp programming language with extensions to support text editing. The features of GNU Emacs include: * Content-sensitive editing modes, including syntax coloring, for a wide variety of file types including plain text, source code, and HTML. * Complete built-in documentation, including a tutorial for new users. * Support for many languages and their scripts, including all the European "Latin" scripts, Russian, Greek, Japanese, Chinese, Korean, Thai, Vietnamese, Lao, Ethiopian, and some Indian scripts. * Highly customizable, using Emacs Lisp code or a graphical customization interface. * A large number of extensions that add other functionality, including a project planner, mail and news reader, debugger interface, calendar, and more. Many of these extensions are distributed with GNU Emacs; others are available separately.
Finding package sizes with size (s)
Ever been curious to find out how much space a specific package is occupying? Since a package could have its files over a number of directories, the usual du -hc command might not give the correct figure. Don't worry, equery to the rescue!
equery size openoffice-bin
* app-office/openoffice-bin-3.1.1 Total files : 4624 Total size : 361.38 MiB
size prints the total space used in human-readable units and lists the total number of files the package has. To get the total size in bytes use
Listing per-package USE flags with uses (u)
uses module can provide information about what USE flags are available for a specific package and which of those flags is currently enabled.
equery uses gst-plugins-meta
* Searching for gst-plugins-meta ... [ Legend : U - flag is set in make.conf ] [ : I - package is installed with flag ] [ Colors : set, unset ] * Found these USE flags for media-plugins/gst-plugins-meta-0.10-r2: U I + + X : Adds support for X11 - - a52 : Enables support for decoding ATSC A/52 streams used in DVD + + alsa : Adds support for media-libs/alsa-lib (Advanced Linux Sound Architecture) - - dvb : Adds support for DVB (Digital Video Broadcasting) + + dvd : Adds support for DVDs + + esd : Adds support for media-sound/esound (Enlightened Sound Daemon) + + ffmpeg : Enable ffmpeg-based audio/video codec support + + flac : Adds support for FLAC: Free Lossless Audio Codec - - mad : Adds support for mad (high-quality mp3 decoder library and cli frontend) + + mpeg : Adds libmpeg3 support to various packages - - mythtv : Support for retrieval from media-tv/mythtv backend + + ogg : Adds support for the Ogg container format (commonly used by Vorbis, Theora and flac) - - oss : Adds support for OSS (Open Sound System) + + theora : Adds support for the Theora Video Compression Codec + + vorbis : Adds support for the OggVorbis audio codec - - xv : Adds in optional support for the Xvideo extension (an X API for video playback)
Here a number of USE flags are enabled in gstreamer's plugin meta-package, but it can be seen that there are other USE flags available. For more information on USE flags, please refer to the USE Flags chapter of the Gentoo Handbook.
Finding the ebuild path with which (w)
which is a simple script to help users quickly find the file path to an ebuild. If an unversioned package name is passed using
which it will return the path to the newest installable ebuild version. In other words, it would return the ebuild Portage would use if emerge example/package was typed.
which also accepts a versioned package to get the path to that ebuild.
equery which gnome
Lastly, if none of the above features of equery have provided an answer, try using
which to manually search an ebuild with programs like cat, less or grep:
grep HOMEPAGE $(equery which gentoolkit)
Be aware that equery currently changes the format of the output if it is sent through a pipe. The piped format is intended to be easier to parse by tools, but it can be turned off by adding the
--no-pipeoption. When writing scripts that employ equery be aware of this behavior.
|Parameter "equery -"||Description|
|u||show USE-flags of package|
|b||package origin of specific file|
- Q applets — a collection of small, fast Portage query utilities written in C.
- Eix — a set of utilities for searching and diffing local ebuild repositories using a binary cache.
- Gentoolkit — a suite of tools to ease the administration of a Gentoo system, and Portage in particular.
- Useful Portage tools — provides a list of Gentoo-specific system management tools, notably for Portage, available in the ebuild repository.