CDROM
From Gentoo Wiki
Outdated translations are marked like this.
W tym artykule opisano konfigurację wewnętrznego napędu optycznego, takiego jak napędy CD, DVD i Blu-Ray.
Instalacja
Wykrywanie sprzętu
Aby wybrać poprawny sterownik, najpierw wykryj używany kontroler pamięci masowej. W tym celu może zostać użyty lspci:
root #
lspci | grep --color -E "IDE|SATA"
Jądro
Aktywuj następujące opcje jądra:
KERNEL Opcje jądra dla optycznych nośników pamięci
Device Drivers ---> <*> Serial ATA and Parallel ATA drivers ---> [*] ATA ACPI Support # If the drive is connected to a SATA Port Multiplier: [*] SATA Port Multiplier support # Select the driver for the SATA controller, e.g.: <*> AHCI SATA support (ahci) # If the drive is connected to an IDE controller: [*] ATA SFF support [*] ATA BMDMA support # Select the driver for the IDE controller, e.g.: <*> Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support (ata_piix) SCSI device support ---> <*> SCSI device support <*> SCSI CDROM support <*> SCSI generic support File systems ---> CD-ROM/DVD Filesystems ---> <M> ISO 9660 CDROM file system support [*] Microsoft Joliet CDROM extensions [*] Transparent decompression extension <M> UDF file system support
Obsługa
Systemy plików można montować na kilka sposobów:
- mount - Komenda do montowania systemu plików
- fstab - Automatyczne montowanie przy uruchamianiu.
- removable media - Montowanie na żądanie.
- AutoFS - Automatyczne montowanie na żądanie.
Rozwiązywanie problemów
Zobacz artykuł Libata error messages na libata wiki.
Zobacz również
- hdparm — a command-line utility to set and view ATA and SATA hard disk drive hardware parameters.