From Gentoo Wiki
Jump to:navigation Jump to:search
Note: Depending on the specific model not all listed devices are included in your computer.
The stated driver under Driver is to be used for the linked howto.
Type Device Model Status Driver Note
Processor processor Transmeta Efficeon TM8000 Yes check.png
Network ethernet card VIA Rhine-II VT6102 Yes check.png via-rhine
Graphics graphics card Intel GMA X3100 Yes check.png intel

Transmeta Efficeon TM8000

processor       : 0
vendor_id       : GenuineTMx86
cpu family      : 15
model           : 2
model name      : Transmeta Efficeon(tm) Processor TM8000
stepping        : 4
cpu MHz         : 1197.144
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush acpi mmx fxsr sse sse2 ss tm nx mmxext longrun lrti constant_tsc
bogomips        : 2394.28
clflush size    : 128
cache_alignment : 128
address sizes   : 32 bits physical, 32 bits virtual
power management:

VIA Rhine-II VT6102

02:05.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 8d)
        Subsystem: VIA Technologies, Inc. Device 0107
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at d000 [size=256]
        Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: via-rhine