USB Fast Ethernet Adapter
From Gentoo Wiki
Installation
Kernel configuration
KERNEL
Device Drivers --->
[*] Network device support --->
<*> USB Network Adapters --->
<M> Multi-purpose USB Networking Framework
<M> (Module from table)
If there is an USB HUB inside the adapter, this should work directly if your USB Controller is configured correctly (see the USB Guide article).
Note
For more complete Ethernet kernel configuration see the Ethernet article.
For more complete Ethernet kernel configuration see the Ethernet article.
Working devices
The table below lists USB Fast Ethernet adapters working with kernel-modules:
| ID | Product Name | lsusb Name | Chipset | Module |
|---|---|---|---|---|
| 0fe6:9700 | 1 Port USB Network with 3 Port USB HUB | Kontron DM9601 Fast Ethernet Adapter | Davicom DM9601 | USB_NET_DM9601 |
| 2357:0602 | TP-Link UE200 USB 2.0 to 100Mbps adapter | TP-Link | Realtek RTL8152B | CONFIG_USB_RTL8152 |
| 0bda:8153 | Anker 3-Port USB 3.0 Hub with Ethernet | Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter | Realtek RTL8153 | CONFIG_USB_RTL8152 |
| 0b95:1790 | TP-Link UE300C USB Type-C to RJ45 Gigabit Ethernet | ASIX Electronics Corp. AX88179 Gigabit Ethernet | Realtek RTL8153 | CONFIG_USB_NET_AX88179_178A |