Translations:Bluetooth headset/58/en
From Gentoo Wiki
| Device | Headphone | Microphone | BlueZ Version | Notes | |
|---|---|---|---|---|---|
| AfterShokz TREKZ Titanium | Yes | Not tested | 5.50-r2 | ||
| AKG N700NC | Yes | Not tested | 5.52 | Update headset firmware to latest version 0.2.7. | |
| Beats By Dre PowerBeats3 | Yes | Not tested | 5.55 | Apply module loading to /etc/pulse/default.pa and system.pa with latest version of Bluez as device and module will not load otherwise. Supports a2dp. Media key presses work for volume, double press next, single press pause, triple click previous. | |
| Bose SoundSport Free (423729) | Yes | Not tested | 5.55 | ||
| Bose SoundSport Free (774373-0010) | Yes | Not tested | 5.48-r1 | ||
| Bose QC Earbuds | Yes | Not tested | 5.55 | ||
| Bose QC35 II Headset | Yes | Yes | 5.61 | ||
| the BTunes 3 | Yes | Not tested | 5.54 | ||
| Cellular Innovations HFBLU-ST6 | Yes | No | ? | ||
| Comexion M100 | Yes | Yes | 5.64 | Pulseaudio needed native-headset USE flag. Manual switching between A2DP and HFP bluetooth profiles is done with pavucontrol. | |
| Creative BT-W2 USB Bluetooth Dongle | Yes | Not tested | 5.52 | Tested on desktop PC without built-in Bluetooth. Very straightforward setup. Requires kernel USB audio enabled. Volume and Play/Pause work. Pair with any Bluetooth headphones. Compile alsa-plugins with speex libsamplerate and ffmpeg USE flags to provide options for better sampling. | |
| Dell BH200 | Yes | Not tested | ? | ||
| Google Pixel Buds | Yes | Yes | 5.49-r1 | ||
| Huawei FreeBuds | Yes | Not tested | 5.49-r1 | ||
| Jabra MOVE v2.3.0 | Yes | Yes | 5.39 | If supported, AAC codec is selected, otherwise SBC | |
| Jabra Elite 65t | Yes | Yes | 5.65 | ||
| Jabra Elite 2 | Yes | Yes | 5.65 | Sometimes the audio is lost for a very short time. | |
| Jabra Evolve2 75 | Yes | Yes | 5.66-r1 | I needed to install *both* pulseaudio-daemon and pulseaudio with appropriate USE flags (sys-apps/portage-3.0.44-r1 dated Sat Apr 1 2023. Feel free to remove this instruction if the dependency is no longer present.) | |
| JBL CLUB PRO+ TWS | Yes | Not tested | 5.66-r1 | ||
| JBL E40BT | Yes | Not tested | 5.47 | ||
| JBL JBL Endurance SPRINT | Yes | Not tested | 5.55 | ||
| JBL GO+ | Yes | Not tested | 5.50-r2 | ||
| JBL Live 400BT | Yes | Yes | 5.62-r3 | It seems some them come with factory defect making mic level too low and impossible to change | |
| JBL T450BT | Yes | Not tested | 5.43 | ||
| JBL Live 500BT | Yes | No | 5.54 | ||
| LG HBS730 | Yes | No | ? | ||
| Lenovo HX106 | Yes | Yes | 5.61 | media-sound/bluez-alsa-3.1.0 is necessary | |
| Marshall Major II | Yes | Not tested | 5.51 | ||
| Marshall MID | Yes | Not tested | 5.51 | ||
| Marshall Stockwell | Yes | Not tested | BlueZ 5.54 | Bluetooth Speaker tested successfully. Microphone not applicable | |
| Mi Bluetooth Headset Basic LYEJ02LM | Yes | Yes | BlueZ 5.61-r1 | Bluetooth Headset Speaker and Microphone both tested successfully. | |
| Nokia BH-214 | Yes | No | 4.101 & 5.39 | ||
| Nokia BH-604 | Yes | Yes | ? | ||
| Parrot Zik | Yes | Not tested | ? | ||
| Philips SBH6201 | Yes | Yes | ? | ||
| Philips SBH9100 | Yes | Not tested | ? | ||
| Pioneer SE-MS9BN-G | Yes | Yes | 5.50-r1 | Microphone tested successfully with BlueZ 5.50-r1 and HSP/HFP profile. Volume and play-pause buttons recognized as Multimedia events in Xfce (XF86AudioNext - XF86AudioPrev - XF86AudioPlay). No special bluetooth configuration is required. You should only make sure that pulseaudio is built with native-headset useflag, and that pulseaudio spawns correctly from your X session. | |
| Plantronics BackBeat GO | Yes | Not tested | ? | ||
| Plantronics BackBeat PRO 2 | Yes | Yes | 5.52 | The microphone works with HSP/HFP. Pulseaudio have to be built with native-headset USE flag to have the microphone working. Buttons work when "User level driver support" is added in the kernel. | |
| Prestigio PBHS1 | Yes | Not tested | ? | ||
| Sennheiser HD 4.40 BT | Yes | Not tested | 5.50-r2 | ||
| Sennheiser MM 550-X Travel | Yes | Yes | 5.27 | Microphone tested successfully with BlueZ 4.x/HSF. With bluez 5.58-r1 switch of audio profile from A2DP to HSP/HFP does not work. Hence microphone does not work. | |
| Sennheiser PXC 550 | Yes | Not tested | 5.50-r1 | Confirmed working with older versions, but not sure how far back. Tested with bluez-alsa (currently 1.3.1), not Pulse Audio. Media controls not tested. | |
| Sennheiser URBANITE XL Wireless | Yes | Not tested | 5.46 | Volume swipes are working | |
| Shure Aionic TW2 | Yes | Not tested | 5.64 | May need to re-pair after pairing with another device. | |
| Shure RMCE-BT2 | Yes | Not tested | 5.52 | Volume buttons adjust volume locally, not on host device. Microphone not detected. Tested with Pulseaudio, not with bluez-alsa. | |
| Shure True Wireless Secure Fit Adapter 2 | Yes | Not tested | 5.52 | No issues. | |
| Sony DR-BTN200 | Yes | No | 5.39 | All buttons except "Call" work and can be assigned shortcuts in the DE | |
| Sony MDR-1000X | Yes | No | 5.50-r3 | Volume swipes are working, prev/next swipes don't work. | |
| Sony MDR-ZX750BN | Yes | No | ? | The change track and volume buttons work. | |
| Sony MDR-ZX770BT | Yes | Not tested | 4.101 & 5.25 | 4.101 requires Enable=Socket in /etc/bluetooth/audio.conf | |
| Sony SBH20 | Yes | Not tested | ? | ||
| Sony SBH52 | Yes | Yes | ? | The buttons work and can be assigned actions in KDE. Supported rate 4800. | |
| Sony WH-XB900N | Yes | Yes | 5.62-r3 | Everything works well at least with pipewire. Make sure kernel's RFCOMM/BNEP are compiled as modules and upower is compiled with "ios" use flag | |
| Sony WH-CH700N | Yes | Not tested | 5.50-r3 | Volume control works. BlueZ 5: blue-alsa | |
| Sony WH-CH710N | Yes | Yes | 5.62-r3 | Tested with pipewire-0.3.36. A2DP bt profile for good audio quality only, HSP/HFP bt profile for having both mic and audio. | |
| Sony WH-1000XM2 | Yes | Yes | 5.56-r1 | The touch interface (volume) on the right speaker works. | |
| Sony WH-1000XM3 | Yes | Yes | 5.55:0/3 | The touch interface on the right speaker works. Strange echo of external sounds in headset mode (possibly feature not error). With bluez 5.58-r1 switch of audio profile from A2DP to HSP/HFP does not work. Hence microphone does not work. | |
| Sony WH-1000XM4 | Yes | No | 5.66-r1 | Haven't been able to get the microphone to work yet. | |
| Sony WI-1000X | Yes | Not Tested | 5.62-r3 | ||
| Sony Ericsson HBH-DS200 | Yes | Not tested | 4.101 & 5.43 | BlueZ 4: software volume control via .asoundrc. BlueZ 5: BlueALSA | |
| Sony Ericsson HBH-DS970 | Yes | Not tested | ? | Requires Enable=Socket in /etc/bluetooth/audio.conf. | |
| Soundcore Spirit Bluetooth Headphones | Yes | Not tested | 5.50-r2 | ||
| Teufel MUTE BT | Yes | Yes | 5.47 | ||
| Apple AirPods Pro | Yes | No | 5.54 | Recording looks like it could work in ALSA, when profile is set to "sco". Recording does not work under normal PulseAudio use. | |
| Apple AirPods (1st generation) | Yes | No | 5.54 | Recording is probably same as AirPods Pro. | |
| Xiaomi Redmi AirDots | Yes | No | 5.54 | There might be a way to make the microphone work, if you mess with pulseaudio and manage to get HSP/HFP to work, but I couldn't do it. | |
| CaseGuru CGpods 5.0 | Yes | Not tested | 5.54 | ||
| Soundcore Life Q30 | Yes | Yes | 5.55 | Playback via Pulseaudio worked with A2DP out of the box, attempts to get the microphone work via HSP/HFP were unsuccessful with both native-headset and ofono/phonesim mess. I was able to get it working with bluez-alsa and then added the device to Pulseaudio as described on bluez-alsa wiki. |