Rebel NetWinder
From Gentoo Wiki
Little-endian ARMv4 based network server from Rebel.
Rebel NetWinder
Board specifications:
# DEC/Intel StrongARM 110 processor, ~233MHz
# DEC/Intel 21285 FootBridge chipset
# 32/64/128MB RAM
# Intergraphics Systems CyberPro 2000A graphics chip with 2MB RAM, VGA output
# WinBond 553 IDE controller
# RockWell WaveArtist audio chip
# Philips 7111 video capture/WinBond 9660 TV Encoder
# 1x WinBond 940 10BaseT Ethernet controller
# 1x Digital 21143(Tulip) 10/100BaseT Ethernet controller
/proc/cpuinfo
CPU info:
Code Listing 2.1: CPU Info
Processor : StrongARM-110 rev 4 (v4l)
BogoMIPS : 185.54
Features : swp half 26bit fastmult
CPU implementer : 0x44
CPU architecture: 4
CPU variant : 0x0
CPU part : 0xa10
CPU revision : 4
Hardware : Rebel-NetWinder
Revision : 59ff
Serial : 0000000000000000
Cross compile preparation
Setup:
root #
emerge --ask crossdev
root #
crossdev armv4l-unknown-linux-gnu
Emerge wrapper:
#!/bin/sh
CHOST=armv4l-unknown-linux-gnu
#export CBUILD=$(portageq envvar CBUILD)
export SYSROOT="/usr/${CHOST}"
export PORTAGE_CONFIGROOT="/usr/${CHOST}"
# optional exports
export enable_malloc0returnsnull=yes \
ac_cv_file__usr_share_sgml_X11_defs_ent=1 \
ac_cv_func_setpgrp_void=yes ac_cv_func_setgrent_void=yes \
ac_cv_func_calloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes \
gl_cv_func_malloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes \
ac_cv_func_memcmp_working=yes ac_cv_func_strnlen_working=yes
# optional export for glib:2
export glib_cv_uscore=no glib_cv_stack_grows=no \
glib_cv_stack_grows=no glib_cv_has__inline=yes \
glib_cv_has__inline__=yes glib_cv_hasinline=yes \
glib_cv_sane_realloc=yes glib_cv_va_copy=yes \
glib_cv___va_copy=yes glib_cv_va_val_copy=no \
glib_cv_rtldglobal_broken=no glib_cv_uscore=no \
ac_cv_func_posix_getpwuid_r=yes \
ac_cv_func_posix_getgrgid_r=yes \
ac_cv_header_pwd_h=yes \
ac_cv_func_getpwuid_r=yes \
glib_cv_sizeof_gmutex=40
FAKEROOT=
if [[ $(id -u) != 0 ]]; then
if [[ $(type -p fakeroot) != "" ]]; then
FAKEROOT=fakeroot
fi
fi
${FAKEROOT} emerge -q "$@"
CHOST=armv4l-unknown-linux-gnu
CBUILD=x86_64-pc-linux-gnu
ARCH="arm"
ROOT=/usr/${CHOST}/
ACCEPT_KEYWORDS="arm ~arm"
USE="${ARCH} zlib bindist make-symlinks minimal \
input_devices_keyboard input_devices_evdev \
video_cards_fbdev video_cards_dummy"
VIDEO_CARDS="fbdev dummy"
INPUT_DEVICES="evdev keyboard mouse touchscreen"
USE_EXPAND="video_cards input_devices"
MARCH_TUNE="-mcpu=strongarm110"
CFLAGS="-Os -pipe ${MARCH_TUNE} -fomit-frame-pointer -I${ROOT}/usr/include/ -I${ROOT}/include/"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-L${ROOT}/usr/lib -L${ROOT}/lib"
PKG_CONFIG_PATH="${ROOT}/usr/lib/pkgconfig/"
MAKEOPTS="-j8"
FEATURES="-collision-protect sandbox buildpkg noman noinfo nodoc"
PORTDIR_OVERLAY="/usr/portage/local/"
PKGDIR=${ROOT}/packages/
PORTAGE_TMPDIR=${ROOT}/tmp/
PORTAGE_WORKDIR_MODE=2775
PORTAGE_ECLASS_WARNING_ENABLE=0
CLEAN_DELAY=0
EPAUSE_IGNORE=1
EBEEP_IGNORE=1
External resources
This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Mike Frysinger, Ned Ludd, Robin H. Johnson, Alex Tarkovsky, Alexey Shvetsov, Raúl Porcel, Joshua Saddler on April 28, 2013.
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.