/etc/portage/make.conf

Portage - the heart of Gentoo
emerge — configuration — ebuild repository — dispatch-conf

world file — USE flags — ebuilds — profiles
upgrades — using testing packages — binary packages
tools — gentoolkit — eselect
Portage FAQ — cheat sheet — FAQ
all articles

/etc/portage/make.conf, previously located at /etc/make.conf, is the main configuration file used to customize the Portage environment on a global level. The /etc/portage directory contains most other Portage configuration files.

Settings in make.conf will apply to every package that is emerged. These settings control many elements of Portage functionality such as global USE flags, language (L10N) options, Portage mirrors, etc.

A very basic version gets installed while extracting the Stage file, and an example setup can be found at /usr/share/portage/config/make.conf.example.

Like many Portage configuration files, make.conf can be a directory, and its contents will get summed together as if it were a single file.

See also
The Handbook covers using make.conf, particularly in the USE flags, Portage features and Variables sections. See man make.conf for comprehensive documentation.

Precedence

The final Portage configuration is not only based on make.conf. Global settings defined in this file can be refined (or redefined) on a per-package basis in the /etc/portage/package.use/ files as well as through environment variables. Default settings managed by the distribution are available as well (partially through the Portage package defaults, partially through the Gentoo profile that is in use).

Note
Although Portage still supports the old /etc/make.conf file location, its use is discouraged in favor of /etc/portage/make.conf. When both files are available, the settings in /etc/portage/make.conf take precedence over those in /etc/make.conf.

Variables

There are many possible variables to customize in make.conf. Only the most commonly used ones are explained further within this article, with an example and a link to a more detailed article (if applicable). For more information, and the full list of variables, consult the make.conf man page by running:

user $man make.conf

Most variables are optional, can span multiple lines, but must not appear more than once.

Note
Different configurations will require different variables to be set up. Do not treat the following examples as a definitive list, or a minimum set of requirements - set just the variables needed.

CHOST

The CHOST variable is passed through the configure step of ebuilds to set the build-host of the system.

Warning
Portage profiles already set the appropriate CHOST value, and updating it requires insight and experience in build chains.

Note
Starting with profile version 23.0 it is recommended to not to list CHOST in the make.conf file.

See also
See the CHOST article for more information.

CFLAGS and CXXFLAGS

The CFLAGS and CXXFLAGS variables define the build and compile flags that will be used for all package deployments (some exceptions notwithstanding who filter out flags known to cause problems with the package). The CFLAGS variable is for C based applications, while CXXFLAGS is meant for C++ based applications. Most users will keep the content of both variables the same.

FILE /etc/portage/make.confCommonly used sane setting for CFLAGS and CXXFLAGS

CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"

See also
For more information see the GCC optimization article, safe CFLAGS, and CFLAGS and CXXFLAGS in the Gentoo Handbook. See also the FAQ.

CONFIG_PROTECT

The CONFIG_PROTECT variable contains a space-delimited list of files and/or directories that Portage will protect from automatic modification. Proposed changes to protected configuration locations will require manual merge(s) from the system administrator (see dispatch-conf or similar merge tools).

A current list of presently protected locations can be displayed with portageq:

user $portageq envvar CONFIG_PROTECT

/etc /usr/share/config /usr/share/gnupg/qualified.txt

Using portageq is a short hand alternative to running a regular expression search on verbose, informational output from the emerge command:

user $emerge --verbose --info | grep -E '^CONFIG_PROTECT='

CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"

Files or subdirectories defined within the CONFIG_PROTECT can be excluded from protection through the CONFIG_PROTECT_MASK variable. Masking is useful when a parent directory should be protected, but a certain child directory beneath it.

The variable has a sane default setting handled by the Portage installation and the users' Gentoo profile. It can be extended through the system environment (which is often used by applications that update the variable through their /etc/env.d file) and the users' /etc/portage/make.conf setting.

FILE /etc/portage/make.confExample CONFIG_PROTECT definitions

CONFIG_PROTECT="/var/bind"

See also the Environment variables chapter in the Gentoo Handbook.

FEATURES

The FEATURES variable contains a list of Portage features that the user wants enabled on the system, effectively influencing Portage's behavior. It is set by default via /usr/share/portage/config/make.globals, but can be easily updated through /etc/portage/make.conf. Since this is an incremental variable, FEATURES values can be added without directly overriding the ones implemented through the Gentoo profile.

FILE /etc/portage/make.confAdding keepwork to FEATURES in Portage

FEATURES="keepwork"

For more information, please see Portage features in the Gentoo Handbook and the FEATURES article. For a complete list of available features, see man 5 make.conf.

See also
See the FEATURES article for more information.

GENTOO_MIRRORS

See also
See the GENTOO_MIRRORS article.

MAKEOPTS

The MAKEOPTS variable is used to specify arguments passed to make when packages are built from source.

FILE /etc/portage/make.confRecommended setting for a dual-core processor with Hyper-Threading enabled with 8GB of RAM

MAKEOPTS="-j4"

See also
See the MAKEOPTS article for more information.

Note
Read up on EMERGE_DEFAULT_OPTS as this variable influences build behavior as well.

EMERGE_DEFAULT_OPTS

EMERGE_DEFAULT_OPTS is a variable for Portage that defines entries to be appended to the emerge command line.

EMERGE_DEFAULT_OPTS allows for parallel emerge operations through the --jobs N and --load-average X.Y options. EMERGE_DEFAULT_OPTS is used by Portage to reference system load, or load average, and limit how many packages are built at a time.

To run up to three build jobs simultaneously:

FILE /etc/portage/make.confEnabling 3 parallel package builds

EMERGE_DEFAULT_OPTS="--jobs 3"

For more information, see the EMERGE_DEFAULT_OPTS article.

PORTAGE_SCHEDULING_POLICY

See also
See the Portage niceness article.

PORTAGE_TMPDIR

The PORTAGE_TMPDIR variable defines the location of the temporary files for Portage. The value defaults to /var/tmp, resulting in /var/tmp/portage for the build location, /var/tmp/ccache for Portage's ccache support and so forth.

FILE /etc/portage/make.confDefault PORTAGE_TMPDIR setting

PORTAGE_TMPDIR="/var/tmp"

On some systems, /var/tmp/ may be mounted with the noexec option. The following error would be displayed by emerge when building packages:

user $emerge --ask package

Can not execute files in /var/tmp/portage
Likely cause is that you've mounted it with one of the
following mount options: 'noexec', 'user', 'users'
 
Please make sure that portage can execute files in this directory.

In this case, if removing the offending option from /etc/fstab isn't possible, PORTAGE_TMPDIR should be set to a different directory.

If enough memory is available, building packages can be accelerated by mounting PORTAGE_TMPDIR in RAM. See the article on Portage TMPDIR on tmpfs for more details.

DISTDIR

The DISTDIR variable defines the location where Portage will store the downloaded source code archives Its value defaults to /var/cache/distfiles on new installations. Previously the default was ${PORTDIR}/distfiles which resolved to /usr/portage/distfiles by default.

Users can set the DISTDIR variable in /etc/portage/make.conf:

Warning
Beware where you place your DISTDIR! Only trusted users should be granted write access to this location.

File integrity check and unpacking is a non-atomic operation, allowing for an attack where a file is swapped in between, possibly leading to compromise the system.

FILE /etc/portage/make.confUsing a different DISTDIR location

DISTDIR=/var/gentoo/distfiles

For more information, please refer to the DISTDIR article.

PKGDIR

PKGDIR is the location Portage keeps binary packages. By default, the location is set to /var/cache/binpkgs.

Previously, binary packages were set to ${PORTDIR}/packages, which by default resolved to /usr/portage/packages.

Run man make.conf for more information.

USE

The USE variable allows the system wide setting or deactivation of USE flags. This variable is a space separated list and may span several lines.

FILE /etc/portage/make.confGlobal USE flags example

USE="-kde -qt5 ldap"

See also
See the article on USE flags for full explanation. See per package control of USE flags, and the /etc/portage/package.use file, about setting USE flags for an individual package.

Note
Always consider whether it is worth setting a USE flag globally and what implications this will have on the system, or if it is preferable to just set a flag for one or several packages individually.

Tip
A USE flag may be temporarily set on the command line to check what effect it will have, before writing it to the world file: USE="[USE flag to test]" emerge --pretend --verbose --update --deep --newuse world

ACCEPT_LICENSE

The ACCEPT_LICENSE variable tells Portage which software licenses are allowed. Packages who have a license that is not accepted cannot be installed on the system.

FILE /etc/portage/make.confTo accept all licenses on all packages

ACCEPT_LICENSE="*"

The preferred way to accept all licenses is to set -@EULA which allows users to check over the terms of proprietary software.

FILE /etc/portage/make.confTo accept all licenses on all packages expect proprietary

ACCEPT_LICENSE="* -@EULA"

FILE /etc/portage/make.confTo accept free software only

ACCEPT_LICENSE="-* @FREE"

LINGUAS

See also
See LINGUAS in the Localization guide.

FILE /etc/portage/make.conf

LINGUAS="de pt_BR en en_US en_GB"

USE_EXPAND

The USE_EXPAND variable is a list set in profiles/base/make.defaults as of Portage 2.0.51.20.

CPU_FLAGS_*

See also
See the CPU_FLAGS_* article for more information.

The CPU_FLAGS_* variables inform Portage about the CPU flags (features) permitted by the CPU. This information is used to optimize package builds specifically for the targeted features. The currently supported variables are CPU_FLAGS_X86 (for amd64 and x86 architectures), CPU_FLAGS_ARM (for arm and arm64 architectures), and CPU_FLAGS_PPC (for ppc and ppc64 architectures).

The cpuid2cpuflags utility (found in the app-portage/cpuid2cpuflags package) can be used to query a complete listing of CPU flags supported by the system's processor. After emerging the package, issue:

user $cpuid2cpuflags

CPU_FLAGS_X86: aes avx f16c mmx mmxext pclmul popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3

These flags can then be added to /etc/portage/make.conf or /etc/portage/package.use/.

INPUT_DEVICES

See the make.conf section of the Xorg/Guide article and the possible values.

L10N

See L10N in the localization guide.

FILE /etc/portage/make.conf

# Defining localization values
L10N="de pt-BR en en-US en-GB"

Note
While common two letter language codes (like de or fr) are identical in LINGUAS and L10N, more complex entries have a different syntax because L10N uses IETF language tags (aka BCP 47). For example, pt_BR and sr@latin in LINGUAS become pt-BR and sr-Latn in L10N, respectively.

VIDEO_CARDS

Warning
This method is deprecated due to bug #922307, for the correct way to set this please use Handbook:AMD64/Installation/Base

For possible values of this USE_EXPAND variable see VIDEO_CARDS.

Machine	Discrete video card	VIDEO_CARDS
Intel x86	None	See Intel#Feature support
x86/ARM	Nvidia	nvidia
Any	Nvidia except Maxwell, Pascal and Volta	nouveau
Any	AMD since Sea Islands	amdgpu radeonsi
Any	ATI and older AMD	See radeon#Feature support
Any	Intel	intel
Raspberry Pi	N/A	vc4
QEMU/KVM	Any	virgl
WSL	Any	d3d12

From the common combinations of machines and video cards, substitute the name of the driver(s) to be used.

Appropriate VIDEO_CARDS value(s) pull in the correct driver(s).

After changing VIDEO_CARDS values remember to update the system using the following command so the changes take effect:

FILE /etc/portage/make.conf

VIDEO_CARDS="intel nouveau radeon radeonsi"

root #emerge --getbinpkg --ask --changed-use --deep @world

Omit --getbinpkg to not use the configured binary package host.

For the average user, if a graphical desktop environment is to be used this variable should be explicitly defined. For further information see the Xorg Guide make.conf section.

For more details see the AMDGPU, Intel, Nouveau, or NVIDIA articles.

See also

• Portage variables (AMD64 Handbook)
• Portage features (AMD64 Handbook)
• Environment variables (AMD64 Handbook)
• Advanced Portage features (AMD64 Handbook)
• Emerge issues with having /.git/index.lock in root

External resources

• make.conf - custom settings for Portage - make.conf man page.