File:Tinker2s demo reduced.png
Original file (1,338 × 936 pixels, file size: 1.9 MB, MIME type: image/png)
Summary
Asus Tinkerboard s, shown here in the bottom half of an old original Raspberry Pi case, for non-conductive protection. The large heatsink shipped was re-used from an old x86 motherboard's coprocessor. This board has an I/O layout similar to RPi 2/3 and might fit those old cases, maybe with some modification to fit the barrel-connector of the 12V power supply. The PSU visible on the left is re-used from an old CPAP machine and was modified to include a switch on its DC supply side. Also visible here is an SPDT switch wired to the Tinkerboard 2 S's "maskrom" jumper - allowing easier selection of either eMMC or SD Card as primary boot device, an LED used to automate a status indicator useful in headless operation, a USB connector for wireless keyboard/mouse, an ethernet cable connection, and an FTDI serial-to-USB converter wired to the Tinkerboard 2 S's debug uart header (stty2) and connected to a PC for serial console monitoring via putty.
Licensing
This file has been released into the public domain by the copyright holder, its copyright has expired, or it is ineligible for copyright. This applies worldwide.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 13:57, 8 May 2024 | 1,338 × 936 (1.9 MB) | Brendlefly62 (talk | contribs) | Asus Tinkerboard s, shown here in the bottom half of an old original Raspberry Pi case, for non-conductive protection. The large heatsink shipped was re-used from an old x86 motherboard's coprocessor. This board has an I/O layout similar to RPi 2/3 and might fit those old cases, maybe with some modification to fit the barrel-connector of the 12V power supply. The PSU visible on the left is re-used from an old CPAP machine and was modified to include a switch on its DC supply side. Also visibl... |
You cannot overwrite this file.
File usage
The following page uses this file: