Genesi Efika MX

Little-endian ARMv7-A from Genesi US.

Documentation

The Genesi USA Efika MX Smarttop is supported on Gentoo, thanks to Genesi USA who provided us with hardware to bring this forward.

Documentation about installing Gentoo on the Genesi USA Efika MX Smarttop

Genesi Efika MX specifications

Board specifications:

CODE

# Freescale i.MX51 SoC
# ARMv7-A 800MHz ARM Cortex-A8 processor
# 512MB DDR2 RAM
# 8GB SSD Flash
# Ralink RT3070USB Wireless card
# ASIX AX88772 USB 2.0 Ethernet card
# Soundcard
# 
# 1x SDHC slot
# 2x USB 2.0 ports
# 1x HDMI out
# 1x Audio IN
# 1x Audio OUT
# 1x Ethernet 100Mbps
# Power button
#
# Board with serial and JTAG

/proc/cpuinfo

CPU info:

FILE /proc/cpuinfo

Code Listing 3.1: CPU Info
Processor	: ARMv7 Processor rev 1 (v7l)
BogoMIPS	: 799.53
Features	: swp half thumb fastmult vfp edsp 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x2
CPU part	: 0xc08
CPU revision	: 1

Hardware	: Genesi Efika MX
Revision	: 51025
Serial		: 0000000000000000

External resources

This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Mike Frysinger, Ned Ludd, Robin H. Johnson, Alex Tarkovsky, Alexey Shvetsov, Raúl Porcel, Joshua Saddler on April 28, 2013.
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.