ZFS
- write "raidz and draid" section
ZFS is a next generation filesystem created by Matthew Ahrens and Jeff Bonwick. It was designed around a few key ideas:
- Administration of storage should be simple.
- Redundancy should be handled by the filesystem.
- File-systems should never be taken offline for repair.
- Automated simulations of worst case scenarios before shipping code is important.
- Data integrity is paramount.
Development of ZFS started in 2001 at Sun Microsystems. It was released under the CDDL in 2005 as part of OpenSolaris. Pawel Jakub Dawidek ported ZFS to FreeBSD in 2007. Brian Behlendorf at LLNL started the ZFSOnLinux project in 2008 to port ZFS to Linux for High Performance Computing. Oracle purchased Sun Microsystems in 2010 and discontinued OpenSolaris later that year.
The Illumos project started to replace OpenSolaris and roughly 2/3 of the core ZFS team resigned, including Matthew Ahrens and Jeff Bonwick. Most of them took jobs at companies which continue to develop OpenZFS, initially as part of the Illumos project. The 1/3 of the ZFS core team at Oracle that did not resign continue development of an incompatible proprietary branch of ZFS in Oracle Solaris.
The first release of Solaris included a few innovative changes that were under development prior to the mass resignation. Subsequent releases of Solaris have included fewer and less ambitious changes. Today, a growing community continues development of OpenZFS across multiple platforms, including FreeBSD, Illumos, Linux and Mac OS X.
Gentoo's ZFS maintainers discourage users from using ZFS (or any other exotic filesystem) on PORTAGE_TMPDIR because Portage has a history of exposing bugs in them. But as of May 2022, it should be fine on ZFS.
Features
A detailed list of features can be found in a separate article.
Installation
Modules
There are out-of-tree Linux kernel modules available from the ZFSOnLinux Project.
Since version 0.6.1, ZFS is considered "ready for wide scale deployment on everything from desktops to super computers" stable for wide scale deployment, by the OpenZFS Project.
All changes to the git repository are subject to regression tests by LLNL.
USE flags
USE flags for sys-fs/zfs Userland utilities for ZFS Linux kernel module
+rootfs
|
Enable dependencies required for booting off a pool containing a rootfs |
custom-cflags
|
Build with user-specified CFLAGS (unsupported) |
debug
|
Enable extra debug codepaths, like asserts and extra output. If you want to get meaningful backtraces see https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Backtraces |
dist-kernel
|
Enable subslot rebuilds on Distribution Kernel upgrades |
kernel-builtin
|
Disable dependency on sys-fs/zfs-kmod under the assumption that ZFS is part of the kernel source tree |
minimal
|
Don't install python scripts (arcstat, dbufstat etc) and avoid dependency on dev-lang/python |
nls
|
Add Native Language Support (using gettext - GNU locale utilities) |
pam
|
Install zfs_key pam module, for automatically loading zfs encryption keys for home datasets |
python
|
Add optional support/bindings for the Python language |
selinux
|
!!internal use only!! Security Enhanced Linux support, this must be set by the selinux profile or breakage will occur |
split-usr
|
Enable behavior to support maintaining /bin, /lib*, /sbin and /usr/sbin separately from /usr/bin and /usr/lib* |
test-suite
|
Install regression test suite |
unwind
|
Add support for call stack unwinding and function name resolution |
verify-sig
|
Verify upstream signatures on distfiles |
Emerge
To install ZFS, run:
root #
emerge --ask sys-fs/zfs
Remerge sys-fs/zfs-kmod after every kernel compile, even if the kernel changes are trivial. When recompiling the kernel after merging the kernel modules, users may encounter problems with zpool entering uninterruptible sleep (unkillable process) or crashing on execute. Alternatively, set USE=dist-kernel with the Distribution Kernel.
root #
emerge -va @module-rebuild
ZFS Event Daemon Notifications
The ZED (ZFS Event Daemon) monitors events generated by the ZFS kernel module. When a zevent (ZFS Event) is posted, the ZED will run any ZEDLETs (ZFS Event Daemon Linkage for Executable Tasks) that have been enabled for the corresponding zevent class.
##
# Email address of the zpool administrator for receipt of notifications;
# multiple addresses can be specified if they are delimited by whitespace.
# Email will only be sent if ZED_EMAIL_ADDR is defined.
# Enabled by default; comment to disable.
#
ZED_EMAIL_ADDR="admin@example.com"
##
# Notification verbosity.
# If set to 0, suppress notification if the pool is healthy.
# If set to 1, send notification regardless of pool health.
#
ZED_NOTIFY_VERBOSE=1
OpenRC
Add the zfs scripts to runlevels for initialization at boot:
root #
rc-update add zfs-import boot
root #
rc-update add zfs-mount boot
root #
rc-update add zfs-load-key boot
root #
rc-update add zfs-share default
root #
rc-update add zfs-zed default
Only the first two are necessary for most setups. zfs-load-key is required for zfs encryption. zfs-share is for people using NFS shares while zfs-zed is for the ZFS Event Daemon that handles disk replacement via hotspares and email notification of failures.
For those who want to use ZFS as root file system, as well as those who put their swaps on ZFS, they might add zfs-import and zfs-mount to sysinit level to make the file system accessible during boot or shutdown process.
systemd
Enable the service so it is automatically started at boot time:
root #
systemctl enable zfs.target
To manually start the daemon:
root #
systemctl start zfs.target
In order to mount zfs pools automatically on boot, the following services and targets need to be enabled:
root #
systemctl enable zfs-import-cache
root #
systemctl enable zfs-mount
root #
systemctl enable zfs-import.target
Kernel
sys-fs/zfs requires Zlib kernel support (module or builtin).
Cryptographic API --->
Compression --->
<*> Deflate
Module
The kernel module must be rebuilt whenever the kernel is.
If using a clang profile to compile sys-fs/zfs-kmod then only versions starting from 2.1.7 work currently due to a recent fix upstream.
Install the kernel module:
root #
emerge --ask sys-fs/zfs-kmod
If using an initramfs, please (re)generate it after (re)compiling the module.
Advanced
Installing into the kernel directory (for static installs)
Building ZFS into the kernel instead of a module is not supported by the Gentoo package maintainers.
This example uses 0.8.4, but may attempt to use later versions. Users should avoid getting zfs and zfs-kmod out of sync with each other.
This will generate the needed files, and copy them into the kernel sources directory.
root #
env EXTRA_ECONF='--enable-linux-builtin' ebuild /var/db/repos/gentoo/sys-fs/zfs-kmod/zfs-kmod-0.8.4.ebuild clean configure
root #
(cd /var/tmp/portage/sys-fs/zfs-kmod-0.8.4/work/zfs-0.8.4/ && ./copy-builtin /usr/src/linux)
After this, CONFIG_SPL and CONFIG_ZFS need to be enabled in the kernel and the zfs binaries should be merged.
root #
mkdir -p /etc/portage/profile
root #
echo 'sys-fs/zfs -kernel-builtin' >> /etc/portage/profile/package.use.mask
root #
echo 'sys-fs/zfs kernel-builtin' >> /etc/portage/package.use/zfs.conf
root #
emerge --oneshot --verbose sys-fs/zfs
The echo commands only need to be run once, but the emerge needs to be run every time a new version of zfs is installed.
Alternative steps
Be sure to read through the steps above; the following steps only replace some of the above steps. The following was done on an amd64 gentoo install with llvm-12.0.1/clang-12.0.1/musl-1.2.2-r3 without binutils/gcc/glibc. config/kernel.m4 needs to be lightly patched. On the line defining ccflags-y, add -Wno-address-of-packed-member after -Werror. On the line calling make modules ..., add LLVM=1 LLVM_IAS=1.
root #
ln -s x86 /usr/src/linux/arch/amd64
root #
ebuild /var/db/repos/gentoo/sys-fs/zfs/zfs-2.0.5.ebuild clean unpack
root #
cp /var/tmp/portage/sys-fs/zfs-2.0.5/work/zfs-2.0.5/config/kernel.m4{,.orig}
root #
# edit /var/tmp/portage/sys-fs/zfs-2.0.5/work/zfs-2.0.5/config/kernel.m4
root #
mkdir -p /etc/portage/patches/sys-fs/zfs
root #
(cd /var/tmp/portage/sys-fs/zfs-2.0.5/work/ && diff -u zfs-2.0.5/config/kernel.m4{.orig,} > /etc/portage/patches/sys-fs/zfs/llvm.patch)
The patch should look something like this:
--- zfs-2.0.5/config/kernel.m4.orig 2021-09-11 21:32:30.967155385 +0000
+++ zfs-2.0.5/config/kernel.m4 2021-09-11 21:37:10.331820894 +0000
@@ -527,7 +527,7 @@
# Example command line to manually build source
# make modules -C $LINUX_OBJ $ARCH_UM M=$PWD/build/$1
-ccflags-y := -Werror $FRAME_LARGER_THAN
+ccflags-y := -Werror -Wno-address-of-packed-member $FRAME_LARGER_THAN
_ACEOF
dnl # Additional custom CFLAGS as requested.
@@ -585,7 +585,7 @@
AC_DEFUN([ZFS_LINUX_COMPILE], [
AC_TRY_COMMAND([
KBUILD_MODPOST_NOFINAL="$5" KBUILD_MODPOST_WARN="$6"
- make modules -k -j$TEST_JOBS -C $LINUX_OBJ $ARCH_UM
+ make LLVM=1 LLVM_IAS=1 modules -k -j$TEST_JOBS -C $LINUX_OBJ $ARCH_UM
M=$PWD/$1 >$1/build.log 2>&1])
AS_IF([AC_TRY_COMMAND([$2])], [$3], [$4])
])
The patching steps should only be repeated if the patch stops working. Now proceed as usual:
root #
env EXTRA_ECONF='--enable-linux-builtin --with-config=kernel' ebuild /var/db/repos/gentoo/sys-fs/zfs/zfs-2.0.5.ebuild clean configure
root #
(cd /var/tmp/portage/sys-fs/zfs-2.0.5/work/zfs-2.0.5/ && ./copy-builtin /usr/src/linux)
Usage
ZFS includes already all programs to manage the hardware and the file systems, there are no additional tools needed.
Preparation
ZFS supports the use of either block devices or files. Administration is the same in both cases, but for production use, the ZFS developers recommend the use of block devices (preferably whole disks). Users can use whichever way is most convenient while experimenting with the various commands detailed here.
To take full advantage of block devices on Advanced Format disks (i.e. drives with 4K sectors), users are highly recommended to read the ZFS on Linux FAQ before creating their pools.
A ZFS storage pool (or zpool) is an aggregate of one or several virtual devices (or vdevs themselves composed of one or several underlying physical devices grouped together in a certain geometry. Three very important rules:
- The zpool being striped across vdevs, if one of the latter becomes unavailable, the whole zpool also becomes unavailable
- Once a dev has been created, its geometry is set in the stone and cannot be modified. the only way to reconfigure a vdev is to destroy and recreate it
- To able to repair a damaged zpool some level of redundancy is required in each of the underlying vdevs
Hardware considerations
- ZFS needs to directly see and steer the physical devices supporting a zpool (it has its own I/O scheduler). It is highly unadvised to use hardware RAID, even multiple single RAID-0 virtual disks because that approach mitigates the benefits brought by ZFS. Always use JBODs. Some controllers propose an option, some other like older LSI HBAs have to be re-flashed with a specific firmware ("IT mode firmware" in the case of LSI) to be able to do JBOD. Unfortunately some RAID controllers only propose RAID levels without any alternative so they are unsuitable for ZFS.
- ZFS can be extremely I/O intensive:
- A very popular option in NAS boxes is to use second-hand SAS HBAs attached to several SATA "rusty" platter drives (on a bigger scale, using near-line SATA drives is recommended)
- If a zpool is created with NVMe modules, ensure those latter are not DRAM-less (check their datasheet). Two reasons for that: avoid a significant bottleneck but also avoid hardware crashes as some of those DRAM-less modules tends to freeze when being overwhelmed by I/O requests[1].
- Do not use the so called SMR (Shingled Magnetic Drives) drives in zpools as those are very slow especially at writing and can timeout on a zpool resilvering thus preventing a recovery. Always use CMR drives with ZFS.
- Consider using power loss protected NVMe/SSDs (i.e with on-board capacitors) unless the storage is protected by an uninterruptible power supply (UPS) or has a very reliable power source
- SATA port multipliers should be avoided, unless there is no other option, as they can introduce major bottlenecks as they multiplex the traffic between the drives connected to them thus dividing the available bandwidth amongst them (I/O latency also increases).
- ZFS is able to use vectorized SSE/AVX instructions found on X86/64 processors to speed up checksums calculations and automatically selects the fastest implementation. It is possible (under Linux) to see the microbenchmarks results in /proc/spl/kstat/zfs/fletcher_4_bench and vdev_raidz_bench. Example:
root #
cat /proc/spl/kstat/zfs/fletcher_4_bench
0 0 0x01 -1 0 2959173570 60832614852064 implementation native byteswap scalar 11346741272 8813266429 superscalar 13447646071 11813021922 superscalar4 15452304506 13531748022 sse2 24205728004 11368002233 ssse3 24301258139 22109806540 avx2 43631210878 41199229117 avx512f 47804283343 19883061560 avx512bw 47806962319 42246291561 fastest avx512bw avx512bw
Redundancy considerations
Although a zpool can have several vdevs of different geometry and capacity each, all the drives within a givenvdev must be of same type and characteristics most notably same capacity and same sector size. Mixing SSD and "rusty" platters drives within a same vdev is not recommended because of performance discrepancies.
Just like RAID, ZFS offers several options to create a redundant (or not) vdev which are:
- striped ("RAID-0"): The fatest option but offers no protection against a drive loss. If a drives dies, not only the vdev dies but also the whole zpool dies as well (remember: a zpool is always a striped thing).
- mirror ("RAID 1") : one drive is the mirror of the other. Usually two drives are used but it is possible to have a 3-faces (or more) mirror at the cost of space use efficiency. Tolerates the loss of one drive only (or two for 3-face mirror)
- raidz1 or also raidz ("RAID-5"): a single parity is used and distributed in the vdev and thus that latter does only tolerate the loss of a single drive. The total vdev capacity is equal to the sum all individual drives capacity (minus the capacity of one drive).
- raidz2 ("RAID-6"): same concept as raidz1 but with two parities. The total vdev capacity is equal to the sum all individual drives capacity (minus the capacity of two drives). Tolerates the loss of two drives.
- raidz3: same concept as raidz1 but with three parities. The total vdev capacity is equal to the sum all individual drives capacity (minus the capacity of three drives). Tolerates the loss of three drives. Use for extreme data security.
Preparing the storage pool
The recommended way to use ZFS is to use physical devices. It is not necessary to take about a device partitioning as "blank" devices will be automatically handled by ZFS.
As an alternative for the rest of explanations, files lying of the top of an existing filesystem can be used if no physical devices are available. This kind approach, suitable for experimentation, must however never be used on production systems.
The following commands create three 2GB sparse image files in /var/lib/zfs_img that we use as our hard drives. This uses at most 8GB disk space, but in practice will use very little because only written areas are allocated:
root #
mkdir /var/lib/zfs_img
root #
truncate -s 2G /var/lib/zfs_img/zfs0.img
root #
truncate -s 2G /var/lib/zfs_img/zfs1.img
root #
truncate -s 2G /var/lib/zfs_img/zfs2.img
root #
truncate -s 2G /var/lib/zfs_img/zfs3.img
On pool export, all of the files will be released and the folder /var/lib/zfs_img can be deleted.
If a ramdisk is more convenient the equivalent of above is:
root #
modprobe brd rd_nr=4 rd_size=1953125
root #
ls -l /dev/ram*
brw-rw---- 1 root disk 1, 0 Apr 29 12:32 /dev/ram0 brw-rw---- 1 root disk 1, 1 Apr 29 12:32 /dev/ram1 brw-rw---- 1 root disk 1, 2 Apr 29 12:32 /dev/ram2 brw-rw---- 1 root disk 1, 2 Apr 29 12:32 /dev/ram3
That latter solution involves having activated CONFIG_BLK_DEV_RAM=m
in the Linux kernel configuration. As a last resort, loopback devices combined to files stored in a tmpfs filesystem can be used. The first part is to create the tmpfs where the raw images files will be put:
root #
mkdir /var/lib/zfs_img
Then create the raw images files themselves:
root #
dd if=/dev/null of=/var/lib/zfs0.img bs=1024 count=2097153 seek=2097152
root #
dd if=/dev/null of=/var/lib/zfs1.img bs=1024 count=2097153 seek=2097152
root #
dd if=/dev/null of=/var/lib/zfs2.img bs=1024 count=2097153 seek=2097152
root #
dd if=/dev/null of=/var/lib/zfs3.img bs=1024 count=2097153 seek=2097152
Then assign a loopback device to each file created above:
root #
losetup /dev/loop0 /var/lib/zfs_img/zfs0.img
root #
losetup /dev/loop1 /var/lib/zfs_img/zfs1.img
root #
losetup /dev/loop2 /var/lib/zfs_img/zfs2.img
root #
losetup /dev/loop3 /var/lib/zfs_img/zfs3.img
root #
losetup -a
/dev/loop1: [0067]:3 (/tmp/zfs_img/zfs1.img) /dev/loop2: [0067]:4 (/tmp/zfs_img/zfs2.img) /dev/loop0: [0067]:2 (/tmp/zfs_img/zfs0.img) /dev/loop3: [0067]:5 (/tmp/zfs_img/zfs3.img)
Zpools
Every ZFS story starts with the program /usr/sbin/zpool which is used to create and tweak ZFS storage pools (zpools). A zpool is a kind of logical storage space, grouping one or several vdevs together. That logical storage can contain both of:
- datasets : A set of files and directories mounted in the VFS, just like any traditional filesystem like xfs or ext4
- zvolumes (or zvols): virtual volumes which can be accessed as virtual block devices and used just like any other physical hard drive on the machine lying under /dev.
Once a zpool has been created, it is possible to take point-in-time pictures (snapshots) of its different zvolumes and datasets. Those snapshots can be browsed or even rolled-back to restore the content as it was back in time. Another paradigm with ZFS is that a zpool, a dataset and a zvolume can be governed by acting on several attributes: Encryption, data compression, usage quotas and many other aspects are just examples on what can be tweaked by attributes.
Remember that a zpool is striped across its vdevs so the loss of even a single of them implies the loss of the whole zpool. The redundancy happens at the vdev level, not the zpool level. When losing a zpool, the only option is to rebuild it from scratch and restore its contents from backups. Taking snapshots is not sufficient to ensure a crash recovery, those have to be sent elsewhere. More on this in following sections.
ZFS is more than a simple filesystem (taken the common accepted sense) as it is a hybrid between a filesystem and a volume manager. Discussing that aspect being out scope, just keep in mind that and use that commonly used term in the rest of this article.
Creating a zpool
The general syntax is:
root #
zpool create <poolname> [{striped,mirror,raidz,raidz2,raidz3}] /dev/blockdevice1 /dev/blockdevice2 ... [{striped,mirror,raidz,raidz2,raidz3}] /dev/blockdeviceA /dev/blockdeviceB ... [{striped,mirror,raidz,raidz2,raidz3}] /dev/blockdeviceX /dev/blockdeviceY ...
If neither
striped,mirror,raidz,raidz2,raidz3
are specified, striped
is assumed by default.Some examples:
zpool create zfs_test /dev/sda
: creates a zpool composed of a single vdev containing only one physical device (no redundancy at all!)zpool create zfs_test /dev/sda /dev/sdb
: creates a zpool composed of a single vdev containing two striped physical devices (no redundancy at all!)zpool create zfs_test mirror /dev/sda /dev/sdb
: creates a zpool composed of a single vdev containing two physical devices in mirrorzpool create zfs_test mirror /dev/sda /dev/sdb mirror /dev/sdc /dev/sdd
: creates a striped mirror zpool composed of a two vdevs each containing two physical devices in mirror (one device in each vdev can die without losing the zpool).zpool create zfs_test raidz /dev/sda /dev/sdb /dev/sdc
: creates a zpool composed of a single vdev containing three physical devices in RAID-Z1 (one loss can be tolerated)
There are some other keywords for the vdev types like
spare
, cache
, slog
, metadata
or draid
(distributed RAID).If files rather than block devices are used, just substitute the block device path by the full path of the files used. So:
zpool create zfs_test /dev/sda
becomeszpool create zfs_test /var/lib/zfs_img/zfs0.img
zpool create zfs_test /dev/sda /dev/sdb
becomeszpool create zfs_test /var/lib/zfs_img/zfs0.img /var/lib/zfs_img/zfs1.img
and so on.
Once a zpool has been created, whatever its architecture is, a dataset having the same name is also automatically created and mounted directly under the VFS root:
root #
mount | grep zpool_test
zpool_test on /zpool_test type zfs (rw,xattr,noacl)
For the moment, that dataset is an empty eggshell containing no data.
Displaying zpools statistics and status
The list of the currently known zpools and some usage statistics can be checked by:
root #
zpool list
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT rpool 5.45T 991G 4.49T - - 1% 17% 1.00x ONLINE - zpool_test 99.5G 456K 99.5G - - 0% 0% 1.00x ONLINE -
Some brief explanations on what is displayed:
- NAME: The name of the pool
- SIZE: The total size of the pool. In the case of RAID-Z{1,3} vdevs, that size takes into account the parity. As
zpool_test
is a mirrored vdev, the reported size here is the size of a single disk. - ALLOC: The current size of stored data (same remark as above for RAID-Z{1,3} vdevs)
- FREE: The available free space (FREE = SIZE - ALLOC)
- CKPOINT: The size taken by an eventual checkpoint (i.e. a global zpool snapshot)
- EXPANDSZ: The space available to expand the zpool. Usually nothing is listed here but on particular scenarios
- FRAG: Free space fragmentation expressed in percents. Fragmentation is not an issue with ZFS as it has been designed to deal with that and there is currently no way to defragment a zpool but recreating it from scratch and restoring its data from backups.
- CAP: Used space expressed as percentage
- DEDUP: Data deduplication factor. Always
1.00x
unless a zpool had data de-duplication active. - HEALTH: Current pool state, "ONLINE" meaning the pool is in an optimal (i.e. non-degraded or, worse, unavailable) state
- ALTROOT: Alternate root path (not persistent across reboots). This is handy in the case a zpool has to be handled from a live media environment: all datasets are mounted relatively to this path which can be set via the
-R
option of thezpool import
command.
It is also possible to have bit more details using the option -v
:
root #
zpool list -v
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT rpool 5.45T 991G 4.49T - - 1% 17% 1.00x ONLINE - raidz1-0 5.45T 991G 4.49T - - 1% 17.8% - ONLINE /dev/nvme1n1p1 1.82T - - - - - - - ONLINE /dev/nvme2n1p1 1.82T - - - - - - - ONLINE /dev/nvme0n1p1 1.82T - - - - - - - ONLINE zpool_test 99.5G 540K 99.5G - - 0% 0% 1.00x ONLINE - mirror-0 99.5G 540K 99.5G - - 0% 0.00% - ONLINE /dev/sdd1 99.9G - - - - - - - ONLINE /dev/sdg1 99.9G - - - - - - - ONLINE
Another very useful command is zpool status
, which provides a detailed report on what is going on on the zpools and if something has to be fixed:
root #
zpool status
zpool status pool: rpool state: ONLINE scan: scrub repaired 0B in 00:03:18 with 0 errors on Sat Apr 29 15:11:19 2023 config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 /dev/nvme1n1p1 ONLINE 0 0 0 /dev/nvme2n1p1 ONLINE 0 0 0 /dev/nvme0n1p1 ONLINE 0 0 0 errors: No known data errors pool: zpool_test state: ONLINE status: One or more devices are configured to use a non-native block size. Expect reduced performance. action: Replace affected devices with devices that support the configured block size, or migrate data to a properly configured pool. config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 0 block size: 4096B configured, 65536B native /dev/sdg1 ONLINE 0 0 0 block size: 4096B configured, 65536B native errors: No known data errors
Import/Export zpool
Refer to the
zfs-import(8)
manpage for detailed descriptions of all available options.A zpool does not magically appear, it has to be imported to be known and usable by the system. Once a zpool is imported, the following happens:
- All datasets, including the root dataset, are mounted in the VFS unless their mountpoint attribute tells otherwise (i.e.
mountpoint=none
). If the datasets are nested and have to be mounted in a hierarchical manner, ZFS handles this case automatically. - Block devices entries are created for zvolumes under /dev/zvol/<poolname>
To search for and list all available (and not already imported) zpools in the system issue the command:
root #
zpool import
pool: zpool_test id: 5283656651466890926 state: ONLINE status: One or more devices are configured to use a non-native block size. Expect reduced performance. action: The pool can be imported using its name or numeric identifier. config: zpool_test ONLINE mirror-0 ONLINE /dev/sdd1 ONLINE /dev/sdg1 ONLINE
To effectively import a zpool just name it and ZFS will automatically probe all attached drives for it:
root #
zpool import zfs_test
or use the -a
option to import all available zpools:
root #
zpool import -a
If all the vdevs composing a zpool are available, either in a clean or in a degraded (but acceptable) state, the import should complete successfully. In the case of a single vdev is missing, the zpool cannot be imported, thus has to be restored from a backup.
Time to demonstrate the famous ALTROOT invoked earlier: suppose we want to import zfs_test but with all of its mountable datasets relatively to /mnt/gentoo rather than the VFS root. This is achieved like this:
root #
zpool import -R /mnt/gentoo zpool_test
root #
zpool list
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT rpool 5.45T 991G 4.49T - - 1% 17% 1.00x ONLINE - zpool_test 99.5G 948K 99.5G - - 0% 0% 1.00x ONLINE /mnt/gentoo
Confirmed by:
root #
mount | grep zpool_test
zpool_test on /mnt/gentoo/zpool_test type zfs (rw,xattr,noacl)
The reverse operation of importing a zpool is called: exporting the pool. If nothing uses the pool (i.e no open files on datasets and no zvolume in use), the zpool can be exported simply with:
root #
zpool export zpool_test
At this time, all mounted datasets are unmounted from the VFS and all block device entries corresponding to zvolumes are cleared from /dev.
Editing Zpools properties
A zpool has several attributes also named properties. While some of them can be changed and are "knobs" to govern aspects like data compression or encryption, some others are intrinsic and can only be read. Two options of the zpool
command can be used to interact with properties:
zpool get propertyname zpoolname
to view propertyname (The special all property name allows to view everything)zpool set propertyname=propertyvalue zpoolname
to set propertyname topropertyvalue
root #
zpool get all zpool_test
NAME PROPERTY VALUE SOURCE zpool_test size 99.5G - zpool_test capacity 0% - zpool_test altroot - default zpool_test health ONLINE - zpool_test guid 14297858677399026207 - zpool_test version - default zpool_test bootfs - default zpool_test delegation on default zpool_test autoreplace off default zpool_test cachefile - default zpool_test failmode wait default zpool_test listsnapshots off default zpool_test autoexpand off default zpool_test dedupratio 1.00x - zpool_test free 99.5G - zpool_test allocated 6.56M - zpool_test readonly off - zpool_test ashift 16 local zpool_test comment - default zpool_test expandsize - - zpool_test freeing 0 - zpool_test fragmentation 0% - zpool_test leaked 0 - zpool_test multihost off default zpool_test checkpoint - - zpool_test load_guid 6528179821128937184 - zpool_test autotrim off default zpool_test compatibility off default zpool_test feature@async_destroy enabled local zpool_test feature@empty_bpobj enabled local zpool_test feature@lz4_compress active local zpool_test feature@multi_vdev_crash_dump enabled local zpool_test feature@spacemap_histogram active local zpool_test feature@enabled_txg active local zpool_test feature@hole_birth active local zpool_test feature@extensible_dataset active local zpool_test feature@embedded_data active local zpool_test feature@bookmarks enabled local zpool_test feature@filesystem_limits enabled local zpool_test feature@large_blocks enabled local zpool_test feature@large_dnode enabled local zpool_test feature@sha512 enabled local zpool_test feature@skein enabled local zpool_test feature@edonr enabled local zpool_test feature@userobj_accounting active local zpool_test feature@encryption enabled local zpool_test feature@project_quota active local zpool_test feature@device_removal enabled local zpool_test feature@obsolete_counts enabled local zpool_test feature@zpool_checkpoint enabled local zpool_test feature@spacemap_v2 active local zpool_test feature@allocation_classes enabled local zpool_test feature@resilver_defer enabled local zpool_test feature@bookmark_v2 enabled local zpool_test feature@redaction_bookmarks enabled local zpool_test feature@redacted_datasets enabled local zpool_test feature@bookmark_written enabled local zpool_test feature@log_spacemap active local zpool_test feature@livelist enabled local zpool_test feature@device_rebuild enabled local zpool_test feature@zstd_compress enabled local zpool_test feature@draid enabled local
The output follows a tabular format where the last two columns are:
VALUE
: The current value for the property. For a boolean property can beon
/off
, for zpool features can beactive
(enabled and currently in use),enabled
(enabled but currently not in use) anddisabled
(disabled, not in use). Depending on the version of OpenZFS your system uses and the enabled zpool features a zpool has, that latter can be imported or not. More explanation on this in a moment.SOURCE
: mentions if the property value has been overridden (local
) or if the default value is used (default
). In the case a property cannot be changed and can only be read, a dash is displayed.
All of them will not be described in details however something immediately catches the eye: a couple of properties have their name starting with feature@
. What is that? History[2].
The legacy zpools version numbering schema has been abandoned in 2012 (shortly after Oracle discontinued Open Solaris and continued the development of ZFS behind closed-doors) and switched to features flags (the zpool version number was also set to 5000 and never changed since), hence the various feature@
figuring in the command output above.
The lastest supported legacy version number a ZFS implementation supports can be checked with
zpool upgrade -v
, with OpenZFS/ZFS the latest legacy supported version is 28.At the time the version numbering scheme was in use, when a zpool was created, the operating system tagged the zpool with the highest supported zpool version number[3]. Those were numbered from 1 (ZFS initial release) to 49 which is supported by Solaris 11.4 SRU 51. As the zpool version number always increased between Solaris releases, so: a newer Solaris version can always import a zpool coming from an older Solaris version. There is however a catch: the zpool must have its version number upgraded (this is a manual operation) to get the benefits of the various news ZFS features and enhancements brought by a newer Solaris version. Once that zpool version number has been upgraded, older Solaris versions can no longer import the zpool. E.g. a zpool created under Solaris 10 9/10 (supporting zpool versions up to 22) can be imported under Solaris 10 1/13 (supporting zpool versions up to 32) and even be imported again on Solaris 10 1/13 after that, at least as long as the zpool version number have not been upgraded under Solaris 10 1/13 (would tag the zpool at version 32).
The same remains true with the features flags: if the zpool has a feature flag enabled but not supported by the ZFS version in use on the system, the zpool cannot be imported. Likewise with the (legacy) version number system: to get the benefits of the new features flags provided by later OpenZFS/ZFS releases, the zpool must be upgraded (manual operation) to be able to support those new feature flags. Once this has been done, older OpenZFS/ZFS releases can no longer import the zpool.
When only
disabled
or enabled
is set for feature flags, they don't matter for zpool import purposes. When active, the read-only/not at all rules from the Feature Flags chart apply.Feature flags can be tricky: some immediately become
active
once enabled
, some never go back to disabled
once enabled
and some never go back to enabled
once active
. See zpool-features (7) for more details. It might be better, if backwards compatibility matters, to simply enable new features selectively as they are needed to be in use.If the zpool lies on SSD or NVMe drives, it might be convenient to enable the autotrim
feature to let ZFS handles the "house keeping" on its own:
root #
zpool get autotrim zpool_test
NAME PROPERTY VALUE SOURCE zpool_test autotrim off default
root #
zpool set autotrim=on zpool_test
root #
zpool get autotrim zpool_test
NAME PROPERTY VALUE SOURCE zpool_test autotrim on local
Another useful feature is data compression. ZFS uses LZ4 by default and if switching to ZSTD is desired, a naïve approach would be:
root #
zpool set feature@zstd_compress=active zpool_test
cannot set property for 'zpool_test': property 'feature@zstd_compress' can only be set to 'enabled' or 'disabled|output=<pre>
Indeed, even that property support is enabled
on the zpool, activating it is not done by just setting the value that way but by changing the value of a property at a dataset level or a zvolume level via some "magic command". Once this "magic command" has been run, the ZSTD compression algorithm becomes effectively in use (active
):
root #
zpool get feature@zstd_compress zpool_test
NAME PROPERTY VALUE SOURCE zpool_test feature@zstd_compress active local
The change applies only to newly written data, any existing data on the zpool is leaved untouched.
As invoked before, a zpool has to be upgraded to enable the usage of the new features provided by newer OpenZFS/ZFS versions (or whatever ZFS implementation used by the operating system). When an upgrade is due, zpool status
will report this and invite to run zpool upgrade
(the full command in this case is zpool upgrade zpool_test
):
root #
zpool status zpool_test
pool: zpool_test state: ONLINE status: Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. config: (...)
Once the zpool upgrade has been done:
root #
zpool status zpool_test
pool: zpool_test state: ONLINE config: (...)
To display the list of currently supported feature flags by the ZFS version in use by the operating system:
root #
zpool upgrade -v
This system supports ZFS pool feature flags. The following features are supported: FEAT DESCRIPTION ------------------------------------------------------------- async_destroy (read-only compatible) Destroy filesystems asynchronously. empty_bpobj (read-only compatible) Snapshots use less space. lz4_compress LZ4 compression algorithm support. multi_vdev_crash_dump Crash dumps to multiple vdev pools. spacemap_histogram (read-only compatible) Spacemaps maintain space histograms. enabled_txg (read-only compatible) Record txg at which a feature is enabled hole_birth Retain hole birth txg for more precise zfs send extensible_dataset Enhanced dataset functionality, used by other features. embedded_data Blocks which compress very well use even less space. bookmarks (read-only compatible) "zfs bookmark" command filesystem_limits (read-only compatible) Filesystem and snapshot limits. large_blocks Support for blocks larger than 128KB. large_dnode Variable on-disk size of dnodes. sha512 SHA-512/256 hash algorithm. skein Skein hash algorithm. edonr Edon-R hash algorithm. userobj_accounting (read-only compatible) User/Group object accounting. encryption Support for dataset level encryption project_quota (read-only compatible) space/object accounting based on project ID. device_removal Top-level vdevs can be removed, reducing logical pool size. obsolete_counts (read-only compatible) Reduce memory used by removed devices when their blocks are freed or remapped. zpool_checkpoint (read-only compatible) Pool state can be checkpointed, allowing rewind later. spacemap_v2 (read-only compatible) Space maps representing large segments are more efficient. allocation_classes (read-only compatible) Support for separate allocation classes. resilver_defer (read-only compatible) Support for deferring new resilvers when one is already running. bookmark_v2 Support for larger bookmarks redaction_bookmarks Support for bookmarks which store redaction lists for zfs redacted send/recv. redacted_datasets Support for redacted datasets, produced by receiving a redacted zfs send stream. bookmark_written Additional accounting, enabling the written#<bookmark> property(space written since a bookmark), and estimates of send stream sizes for incrementals from bookmarks. log_spacemap (read-only compatible) Log metaslab changes on a single spacemap and flush them periodically. livelist (read-only compatible) Improved clone deletion performance. device_rebuild (read-only compatible) Support for sequential device rebuilds zstd_compress zstd compression algorithm support. draid Support for distributed spare RAID The following legacy versions are also supported: VER DESCRIPTION --- -------------------------------------------------------- 1 Initial ZFS version 2 Ditto blocks (replicated metadata) 3 Hot spares and double parity RAID-Z 4 zpool history 5 Compression using the gzip algorithm 6 bootfs pool property 7 Separate intent log devices 8 Delegated administration 9 refquota and refreservation properties 10 Cache devices 11 Improved scrub performance 12 Snapshot properties 13 snapused property 14 passthrough-x aclinherit 15 user/group space accounting 16 stmf property support 17 Triple-parity RAID-Z 18 Snapshot user holds 19 Log device removal 20 Compression using zle (zero-length encoding) 21 Deduplication 22 Received properties 23 Slim ZIL 24 System attributes 25 Improved scrub stats 26 Improved snapshot deletion performance 27 Improved snapshot creation performance 28 Multiple vdev replacements
Zpool failures and spare vdevs
Hardware is not perfect and sometimes a drive can fail for some reason or the data on it can become corrupt. ZFS has countermeasures to detect corruption and prevent even double-flipped bits errors. If the underlying vdevs are redundant, damaged data can be repaired as if nothing had ever happened.
Remember that zpools are striped across all of their vdev and two scenarios can happen when a device fails:
- Either enough redundancy exists and the zpool is still available but under a "DEGRADED" state
- Either there is not enough redundancy exists and the zpool becomes "SUSPENDED" (at this point data must be restored from a backup)
A zpool status
reports what the situation is:
root #
zpool status zpool_test
pool: zpool_test state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: NAME STATE READ WRITE CKSUM zpool_test DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 /dev/sde1 UNAVAIL 3 80 0 /dev/sdh1 ONLINE 0 0 0
To simulate a drive failure with a block device issue
echo offline > /sys/block/<block device>/device/state
(echo running > /sys/block/<block device>/device/state
will bring the drive back to online state)The defective drive (/dev/sde) has to be physically replaced by another one (here /dev/sdg). That task is accomplished by first off-lining the failed drive from the zpool:
root #
zpool offline zpool_test /dev/sde
root #
zpool status zpool_test
pool: zpool_test state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P config: NAME STATE READ WRITE CKSUM zpool_test DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 /dev/sde1 OFFLINE 3 80 0 /dev/sdh1 ONLINE 0 0 0 errors: No known data errors
Then proceeding with the replacement (ZFS will partition the new drive automatically) :
root #
zpool replace zpool_test /dev/sde /dev/sdg
root #
zpool status zpool_test
pool: zpool_test state: ONLINE scan: resilvered 28.9M in 00:00:01 with 0 errors on Sat May 6 11:12:55 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdg1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0
Once the drive has been replaced, ZFS starts a rebuilding process in background known as resilvering which can take several hours or even days depending on the amount of data stored on the zpool. Here the amount is very small so the revilvering process just takes a couple of seconds. On large zpools the resilvering process duration can even be prohibitive and this is where draid kicks-in (a totally different beast than raidz), more on this later.
Rather than being a manual operation, what if the zpool can have hot-spare drives that can automatically replace the failed ones? This is exactly the reason of having a special vdev known as... spare. There is two ways of having spare vdevs in a zpool: they can be specified whenever the zpool is created or, like demonstrated below, can be added on the fly to an existing zpool. Obviously, the hot-spare drives must be of identical characteristics of the faulty drives they are intended to replace.
To add a spare vdev, simply add it by issuing a zpool add
command (here again, ZFS will partition the hot-spare drive on its own). Once added to a zpool, the hot-spare remains in stand-by until a drive failure happens:
root #
zpool add zpool_test spare /dev/sdd
root #
zpool status zpool_test
pool: zpool_test state: ONLINE scan: resilvered 28.9M in 00:00:01 with 0 errors on Sat May 6 11:12:55 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdg1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0 spares /dev/sdd1 AVAIL errors: No known data errors
At this point the hot-spare is available (AVAIL
). If for some reason /dev/sdh (or /dev/sdg would fail, /dev/sdd will immediately take over the failed drive (so it becomes INUSE
) thus triggering a zpool resilvering in background with no downtime for the zpool:
root #
zpool status
pool: zpool_test state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J scan: resilvered 40.7M in 00:00:01 with 0 errors on Sat May 6 11:39:28 2023 config: NAME STATE READ WRITE CKSUM zpool_test DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 spare-0 DEGRADED 0 0 0 /dev/sdg1 UNAVAIL 3 83 0 /dev/sdd1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0 spares /dev/sdd1 INUSE currently in use
The original drive will automatically get removed asynchronously. If this is not the case, it may need to be manually detached with the zpool detach
command:
root #
zpool detach zpool_test /dev/sdg
root #
zpool status
pool: zpool_test state: ONLINE scan: resilvered 40.7M in 00:00:01 with 0 errors on Sat May 6 11:39:28 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0 errors: No known data errors
Once the failed drive has been physically replaced, it can be re-added to the zpool as a new hot-spare. It is also possible to share the same hot-spare between more than one zpool.
Having a mirrored vdev under the hand in the present example: it is also possible to add a third actively used drive to it rather than using a hot-spare drive. This is accomplished by attaching the new drive (zpool attach
) to one of the existing drives composing the mirrored vdev:
root #
zpool attach zpool_test /dev/sdh /dev/sdg
root #
zpool status zpool_test
pool: zpool_test state: ONLINE scan: resilvered 54.4M in 00:00:00 with 0 errors on Sat May 6 11:55:42 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0 /dev/sdg1 ONLINE 0 0 0 errors: No known data errors
zpool attach zpool_test /dev/sdd /dev/sdg
would have given the same result.It is a good practice to periodically scrub a zpool to ensure what it contains is "healthy" (if something is corrupt and if the zpool have enough redundancy the damage will be repaired). To start a manual scrub:
root #
zpool scrub zpool_test
root #
zpool status zpool_test
pool: zpool_test state: ONLINE scan: scrub repaired 0B in 00:00:01 with 0 errors on Sat May 6 12:06:18 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0 /dev/sdg1 ONLINE 0 0 0 errors: No known data errors
In the case of something corrupt is detected the output of the above command would be:
root #
zpool scrub zpool_test
root #
zpool status zpool_test
pool: zpool_test state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: scrub repaired 256K in 00:00:00 with 0 errors on Sat May 6 12:09:22 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 4 /dev/sdh1 ONLINE 0 0 0 /dev/sdg1 ONLINE 0 0 0 errors: No known data errors
To corrupt a drive contents a command like
dd if=/dev/urandom of=/dev/sdd1
can be issued (give it a few seconds to corrupt enough data).Once the damage has been repaired, issue a zpool clear
command as suggested:
root #
zpool clear zpool_test
root #
zpool status zpool_test
pool: zpool_test state: ONLINE scan: scrub repaired 256K in 00:00:00 with 0 errors on Sat May 6 12:09:22 2023 config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 0 /dev/sdg1 ONLINE 0 0 0 errors: No known data errors
To detach a drive from a three-faced mirror vdev, just use
zpool detach
as seen before. It is enven to also detach a drive from a two-faced mirror at the penalty of having no more redundancy.Speaking about three-faced mirrors, having only one of the three drives healthy still allows a functional zpool:
root #
zpool scrub zpool_test
root #
zpool status zpool_test
pool: zpool_test state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: scrub in progress since Sat May 6 13:43:09 2023 5.47G scanned at 510M/s, 466M issued at 42.3M/s, 5.47G total 0B repaired, 8.31% done, 00:02:01 to go config: NAME STATE READ WRITE CKSUM zpool_test ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /dev/sdd1 ONLINE 0 0 0 /dev/sdh1 ONLINE 0 0 68.9K /dev/sdg1 ONLINE 0 0 68.9K errors: No known data errors
Destroying and restoring a zpool
Once a zpool is no longer needed, it can be destroyed with zpool destroy
. If the zpool is not empty and contains zvolumes and/or datasets, the -r
option is required. There is no need to export the zpool first as ZFS will handles this automatically.
If the zpool has just been destroyed and all of its vdevs are still intact, it is possible to re-import it by issuing a zpool import
this time using the option -D
:
root #
zpool destroy zpool_test
root #
zpool import -D
pool: zpool_test id: 628141733996329543 state: ONLINE (DESTROYED) action: The pool can be imported using its name or numeric identifier. config: zpool_test ONLINE mirror-0 ONLINE /dev/sdd1 ONLINE /dev/sdh1 ONLINE /dev/sdg1 ONLINE
Importing the destroyed zpool that way also "undestroy" it:
root #
zpool list zpool_test
cannot open 'zpool_test': no such pool
root #
zpool import -D zpool_test
root #
zpool list zpool_test
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT zpool_test 99.5G 5.48G 94.0G - - 0% 5% 1.00x ONLINE -
Technically speaking this operation simply consist of tagging the zpool as being in a "destroyed state" and no data is wiped from the underlying vdevs. Therefore all unencrypted data can still be read.
Browsing a zpool History
Sometimes it is extremely useful to get the list of what happened in a zpool life and here is where zpool history
comes at rescue. As zpool_test
is brand new and so has nothing really interesting to show, let's take an example of what is going on with a real zpool used in production on workstation recently restored from backups themselves stored in a remote TrueNAS box:
root #
zpool history rpool
History for 'rpool': 2023-05-02.19:24:36 zpool create rpool raidz /dev/nvme0n1 /dev/nvme1n1 /dev/nvme2n1 2023-05-02.19:27:32 zfs create -o mountpoint=none rpool/ROOT 2023-05-02.19:27:36 zfs create -o mountpoint=none rpool/HOME 2023-05-02.19:33:59 zfs receive -vu rpool/ROOT/gentoo-gcc13-avx512 2023-05-02.19:39:57 zfs receive -vu rpool/HOME/user111 2023-05-02.20:05:52 zpool set autotrim=on rpool 2023-05-02.20:08:12 zfs destroy -r rpool/HOME/user111 2023-05-02.20:33:27 zfs receive -vu rpool/HOME/user1 2023-05-02.20:35:12 zpool import -a 2023-05-02.20:58:19 zpool scrub rpool 2023-05-02.21:22:25 zpool import -N rpool 2023-05-02.21:23:18 zpool set cachefile=/etc/zfs/zpool.cache rpool 2023-05-03.07:02:25 zfs snap rpool/ROOT/gentoo-gcc13-avx512@20230503 2023-05-03.07:02:36 zfs snap rpool/HOME/user1@20230503 2023-05-03.07:04:16 zfs send -I rpool/HOME/user1@20230430 rpool/HOME/user1@20230502 2023-05-07.16:10:15 zpool import -N -c /etc/zfs/zpool.cache rpool (...)
It is possible to have the same information in full-format (who/what/where/when):
root #
zpool history -l rpool
History for 'rpool': 2023-05-02.19:24:36 zpool create rpool raidz /dev/nvme0n1 /dev/nvme1n1 /dev/nvme2n1 [user 0 (root) on livecd:linux] 2023-05-02.19:27:32 zfs create -o mountpoint=none rpool/ROOT [user 0 (root) on livecd:linux] 2023-05-02.19:27:36 zfs create -o mountpoint=none rpool/HOME [user 0 (root) on livecd:linux] 2023-05-02.19:33:59 zfs receive -vu rpool/ROOT/gentoo-gcc13-avx512 [user 0 (root) on livecd:linux] 2023-05-02.19:39:57 zfs receive -vu rpool/HOME/user111[user 0 (root) on livecd:linux] (...) 2023-05-02.20:35:12 zpool import -a [user 0 (root) on wks.myhomenet.lan:linux]
Basically we can observe that:
- The zpool as been created using a Linux live media environment (in that case the Gentoo LiveCD) and that environment had set
livecd
has being the hostname at that time
- Two placeholders (non-mountable) datasets named
rpool/ROOT
andrpool/HOME
have been created by the userroot
under that live media environment - The dataset
rpool/ROOT/gentoo-gcc13-avx512
(obviously the Gentoo system) has been restored from a remote snapshot by the userroot
under that live media environment - The dataset
rpool/HOME/user111
(obviously a user home directory) has been restored from a remote snapshot by the userroot
under that live media environment - At some point, the workstation rebooted under the restored Gentoo environment (notice the hostname change for
wks.myhomenet.lan
) that imported the zpool - and so on.
Zpool tips/tricks
- You sometimes cannot shrink a zpool after initial creation - if the pool has no raidz vdevs and the pool has all vdevs of the same ashift, the "device removal" feature in 0.8 and above can be used. There are performance implications to doing this, however, so always be careful when creating pools or adding vdevs/disks!
- It is possible to add more disks to a MIRROR after its initial creation. Use the following command (/dev/loop0 is the first drive in the MIRROR):
root #
zpool attach zfs_test /dev/loop0 /dev/loop2
- Sometimes, a wider RAIDZ vdev can be less suitable than two (or more) smaller RAIDZ vdevs. Try testing your intended use before settling on one and moving all your data onto it.
- RAIDZ vdevs cannot (currently) be resized after initial creation (you may only add additional hot spares). You can, however, replace the hard drives with bigger ones (one at a time), e.g. replace 1T drives with 2T drives to double the available space in the zpool.
- It is possible to mix MIRROR and RAIDZ vdevs in a zpool. For example to add two more disks as a MIRROR vdev in a zpool with a RAIDZ1 vdev named zfs_test, use:
root #
zpool add -f zfs_test mirror /dev/loop4 /dev/loop5
- Warning
You probably don't have good reason to do this. Perhaps a special vdev or log vdev would be a reasonable time, but in general, you'd be winding up with the worst performance characteristics of both. - Note
This needs the -f option, because the vdev you're adding does not match the existing vdevs.
Zpools coming from other architectures
It is possible to import zpools coming from other platforms even of a different bit ordering as long as:
- they are of legacy version 28 or earlier
- The ZFS implementation used support at least the features indicated by the zpools in the case of a zpool at version 5000.
In the following example, a zpool named oldpool had been created on an emulated FreeBSD 10/SPARC64 environment emulated with app-emulation/qemu. The zpool had been created with legacy version 28 (zpool create -o version=28
) which is basically what a SPARC64 machine running Solaris 10 would also have done:
root #
zpool import
pool: oldpool id: 11727962949360948576 state: ONLINE status: The pool is formatted using a legacy on-disk version. action: The pool can be imported using its name or numeric identifier, though some features will not be available without an explicit 'zpool upgrade'. config: oldpool ONLINE raidz1-0 ONLINE /dev/loop0 ONLINE /dev/loop1 ONLINE /dev/loop2 ONLINE
root #
zpool import -f oldpool
root #
zpool status oldpool
pool: oldpool state: ONLINE status: The pool is formatted using a legacy on-disk format. The pool can still be used, but some features are unavailable. action: Upgrade the pool using 'zpool upgrade'. Once this is done, the pool will no longer be accessible on software that does not support feature flags. config: NAME STATE READ WRITE CKSUM oldpool ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 /dev/loop0 ONLINE 0 0 0 /dev/loop1 ONLINE 0 0 0 /dev/loop2 ONLINE 0 0 0 errors: No known data errors
Notice the values of all feature@ (all are disabled
) and version (28
) properties:
root #
zpool get all oldpool
NAME PROPERTY VALUE SOURCE oldpool size 11.9G - oldpool capacity 0% - oldpool altroot - default oldpool health ONLINE - oldpool guid 11727962949360948576 - oldpool version 28 local oldpool bootfs - default oldpool delegation on default oldpool autoreplace off default oldpool cachefile - default oldpool failmode wait default oldpool listsnapshots off default oldpool autoexpand off default oldpool dedupratio 1.00x - oldpool free 11.9G - oldpool allocated 88.8M - oldpool readonly off - oldpool ashift 0 default oldpool comment - default oldpool expandsize - - oldpool freeing 0 - oldpool fragmentation - - oldpool leaked 0 - oldpool multihost off default oldpool checkpoint - - oldpool load_guid 11399183722859374527 - oldpool autotrim off default oldpool compatibility off default oldpool feature@async_destroy disabled local oldpool feature@empty_bpobj disabled local oldpool feature@lz4_compress disabled local oldpool feature@multi_vdev_crash_dump disabled local oldpool feature@spacemap_histogram disabled local oldpool feature@enabled_txg disabled local oldpool feature@hole_birth disabled local oldpool feature@extensible_dataset disabled local oldpool feature@embedded_data disabled local oldpool feature@bookmarks disabled local oldpool feature@filesystem_limits disabled local oldpool feature@large_blocks disabled local oldpool feature@large_dnode disabled local oldpool feature@sha512 disabled local oldpool feature@skein disabled local oldpool feature@edonr disabled local oldpool feature@userobj_accounting disabled local oldpool feature@encryption disabled local oldpool feature@project_quota disabled local oldpool feature@device_removal disabled local oldpool feature@obsolete_counts disabled local oldpool feature@zpool_checkpoint disabled local oldpool feature@spacemap_v2 disabled local oldpool feature@allocation_classes disabled local oldpool feature@resilver_defer disabled local oldpool feature@bookmark_v2 disabled local oldpool feature@redaction_bookmarks disabled local oldpool feature@redacted_datasets disabled local oldpool feature@bookmark_written disabled local oldpool feature@log_spacemap disabled local oldpool feature@livelist disabled local oldpool feature@device_rebuild disabled local oldpool feature@zstd_compress disabled local oldpool feature@draid disabled local
FreeBSD versions 9, 10,11 and 12 uses the ZFS implementation coming from Illumos/OpenSolaris. FreeBSD 13 uses OpenZFS 2.x.
To have this zpool being able to use the very latest features of OpenZFS/ZFS or the ZFS implementation used on your system, the zpool has to be upgraded like explained in the above sections:
root #
zpool upgrade oldpool
This system supports ZFS pool feature flags. Successfully upgraded 'oldpool' from version 28 to feature flags. Enabled the following features on 'oldpool': async_destroy empty_bpobj lz4_compress multi_vdev_crash_dump spacemap_histogram enabled_txg hole_birth extensible_dataset embedded_data bookmarks filesystem_limits large_blocks large_dnode sha512 skein edonr userobj_accounting encryption project_quota device_removal obsolete_counts zpool_checkpoint spacemap_v2 allocation_classes resilver_defer bookmark_v2 redaction_bookmarks redacted_datasets bookmark_written log_spacemap livelist device_rebuild zstd_compress draid
As a test, scrub the pool:
root #
zpool scrub oldpool
root #
zpool status oldpool
pool: oldpool state: ONLINE scan: scrub repaired 0B in 00:00:00 with 0 errors on Sun May 7 16:35:57 2023 config: NAME STATE READ WRITE CKSUM oldpool ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 /dev/loop0 ONLINE 0 0 0 /dev/loop1 ONLINE 0 0 0 /dev/loop2 ONLINE 0 0 0 errors: No known data errors
What about the contained data?
root #
tar -tvf /oldpool/boot-fbsd10-sparc64.tar
drwxr-xr-x root/wheel 0 2017-09-29 04:09 boot/ -r--r--r-- root/wheel 3557 2017-09-29 04:09 boot/beastie.4th -r--r--r-- root/wheel 8192 2017-09-29 04:09 boot/boot1 -r--r--r-- root/wheel 2809 2017-09-29 04:09 boot/brand.4th -r--r--r-- root/wheel 2129 2017-09-29 04:09 boot/brand-fbsd.4th -r--r--r-- root/wheel 6208 2017-09-29 04:09 boot/check-password.4th -r--r--r-- root/wheel 1870 2017-09-29 04:09 boot/color.4th drwxr-xr-x root/wheel 0 2017-09-29 04:09 boot/defaults/ -r--r--r-- root/wheel 4056 2017-09-29 04:09 boot/delay.4th -r--r--r-- root/wheel 89 2017-09-29 04:09 boot/device.hints drwxr-xr-x root/wheel 0 2017-09-29 04:09 boot/dtb/ drwxr-xr-x root/wheel 0 2017-09-29 04:09 boot/firmware/ -r--r--r-- root/wheel 4179 2017-09-29 04:09 boot/frames.4th drwxr-xr-x root/wheel 0 2017-09-29 04:09 boot/kernel/ -r--r--r-- root/wheel 6821 2017-09-29 04:09 boot/loader.4th -r-xr-xr-x root/wheel 211768 2017-09-29 04:09 boot/loader (...)
A zpool is perfectly importable even if coming for a totally different world (SPARC64 is a MSB bit-ordering architecture whereas ARM/X86_64 are LSB bit-ordering architectures). To clean everything up (as created in the second part of this section hereafter):
root #
zpool export oldpool
root #
losetup -D
root #
rm /tmp/fbsd-sparc64-ada{0,1,2}.raw
Now the zpool has been upgraded, what happens if an import is attempted on the older FreeBSD 10/SPARC64 environment?
root #
zpool import -o altroot=/tmp -f oldpool
This pool uses the following feature(s) not supported by this system: com.delphix:spacemap_v2 (Space maps representing large segments are more efficient.) com.delphix:log_spacemap (Log metaslab changes on a single spacemap and flush them periodically.) All unsupported features are only required for writing to the pool. The pool can be imported using '-o readonly=on'.
root #
zpool import -o readonly=on -o altroot=/tmp -f oldpool
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT oldpool 11.9G 88.7M 11.9G - 0% 0% 1.00x ONLINE /tmp
The system sees it but refuses to import it a read/write state. Issuing zpool status
or zpool list
command will not show if the zpool but a zpool get all
will, not obviously, give a hint:
root #
zpool get all
NAME PROPERTY VALUE SOURCE oldpool size 11.9G - oldpool capacity 0% - oldpool altroot /tmp local oldpool health ONLINE - oldpool guid 11727962949360948576 default oldpool version - default oldpool bootfs - default oldpool delegation on default oldpool autoreplace off default oldpool cachefile none local oldpool failmode wait default oldpool listsnapshots off default oldpool autoexpand off default oldpool dedupditto 0 default oldpool dedupratio 1.00x - oldpool free 11.9G - oldpool allocated 88.7M - oldpool readonly on - oldpool comment - default oldpool expandsize - - oldpool freeing 0 default oldpool fragmentation 0% - oldpool leaked 0 default oldpool feature@async_destroy enabled local oldpool feature@empty_bpobj enabled local oldpool feature@lz4_compress active local oldpool feature@multi_vdev_crash_dump enabled local oldpool feature@spacemap_histogram active local oldpool feature@enabled_txg active local (...) oldpool unsupported@com.delphix:zpool_checkpoint inactive local oldpool unsupported@com.delphix:spacemap_v2 readonly local oldpool unsupported@com.delphix:log_spacemap readonly local (...)
Notice the value of properties unsupported@com.delphix:spacemap_v2 and unsupported@com.delphix:log_spacemap. Also notice that all unsupported features have their names starting with unsupported@.
For the completeness here is what happens when an attempt to import a totally incompatible zpool. The following example shows what happens when a Linux system (OpenZFS 2.1.x) attempts to import a zpool created under Solaris 11.4 (Solaris still uses the legacy version scheme and tagged the zpool at version 42).
root #
zpool import -f rpool
cannot import 'rpool': pool is formatted using an unsupported ZFS version
In that case there is a life jacket: although the zpool uses an unknown zpool version to OpenZFS, the ZFS version reported by both Solaris 11.4 and OpenZFS 2.1.x is 5 (not to be confused the zpool version) so the datasets on the zpool can be "zfs sent" somewhere from the Solaris environment, then "zfs received" in the Linux environment.
For the sake of reproducibility the rest of this section details the followed steps to create the zpool
oldpool
from a FreeBSD/SPARC64 environment. At this point the rest of this section can be skipped if that process is of no interest.To create the zpool oldpool
used above:
- Install app-emulation/qemu (QEMU 8.0 was used) ensuring the variable QEMU_SOFTMMU_TARGETS contains at least
sparc64
build the "full" SPARC64 system emulator:root #
emerge --ask app-emulation/qemu
- Download a FreeBSD 10/SPARC64 DVD ISO image from one of the mirrors (FreeBSD 9 crashes at boot under QEMU, so FreeBSD 10 is the minimum knowing that FreeBSD 12 has some issues while loading the required modules)
- Create some images (here three of 4G each) for the future vdevs: for i in {0..2}; do qemu-img create -f raw /tmp/fbsd-sparc64-ada${i}.raw 4G; done;
- Fire QEmu up (you must use
-nographic
else FreeBSD hangs, also Sun4u machines have 2 IDE channels so 3 hard drives + 1 ATAPI CD/DVD ROM drive):
root #
qemu-system-sparc64 -nographic -m 2G -drive format=raw,file=/tmp/fbsd-sparc64-ada0.raw,media=disk,index=0 -drive format=raw,file=/tmp/fbsd-sparc64-ada1.raw,media=disk,index=1 -drive format=raw,file=/tmp/fbsd-sparc64-ada2.raw,media=disk,index=2 -drive format=raw,file=/tmp/FreeBSD-10.4-RELEASE-sparc64-dvd1.iso,media=cdrom,readonly=on
OpenBIOS for Sparc64 Configuration device id QEMU version 1 machine id 0 kernel cmdline CPUs: 1 x SUNW,UltraSPARC-IIi UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.1 built on Mar 7 2023 22:22 Type 'help' for detailed information Trying disk:a... No valid state has been set by load or init-program 0 >
- At the OpenBIOS prompt
0 >
enter: boot cdrom:f - Now FreeBSD should boot, as emulation is slow it can take awhile, let the boot process complete and check if all the virtual disks (adaX) are mentioned:
Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 >> FreeBSD/sparc64 boot block Boot path: /pci@1fe,0/pci@1,1/ide@3/ide@1/cdrom@1:f Boot loader: /boot/loader Consoles: Open Firmware console FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@releng1.nyi.freebsd.org, Fri Sep 29 07:57:55 UTC 2017) bootpath="/pci@1fe,0/pci@1,1/ide@3/ide@1/cdrom@1:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0xc25140+0xe62a0 syms=[0x8+0xcd2c0+0x8+0xbf738] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... jumping to kernel entry at 0xc00a8000. Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.4-RELEASE #0 r324094: Fri Sep 29 08:00:33 UTC 2017 root@releng1.nyi.freebsd.org:/usr/obj/sparc64.sparc64/usr/src/sys/GENERIC sparc64 (...) ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <QEMU HARDDISK 2.5+> ATA-7 device ada0: Serial Number QM00001 ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes) ada0: 4096MB (8388608 512 byte sectors) ada0: Previously was known as ad0 cd0 at ata3 bus 0 scbus1 target 1 lun 0 cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device cd0: Serial Number QM00004 cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: 2673MB (1368640 2048 byte sectors) ada1 at ata2 bus 0 scbus0 target 1 lun 0 ada1: <QEMU HARDDISK 2.5+> ATA-7 device ada1: Serial Number QM00002 ada1: 33.300MB/s transfers (UDMA2, PIO 8192bytes) ada1: 4096MB (8388608 512 byte sectors) ada1: Previously was known as ad1 ada2 at ata3 bus 0 scbus1 target 0 lun 0 ada2: <QEMU HARDDISK 2.5+> ATA-7 device ada2: Serial Number QM00003 ada2: 33.300MB/s transfers (UDMA2, PIO 8192bytes) ada2: 4096MB (8388608 512 byte sectors) ada2: Previously was known as ad2 (...) Console type [vt100]:
- When the kernel has finished to boot, FreeBSD asks the console type, just press ENTER to accept the default choice (VT100)
- The FreeBSD installer is spawned, use the TAB key twice to highlight
LiveCD
and press the ENTER key to exit the FreeBSD installer and reach a login prompt - at the login prompt, enter root (no password) et voila! a BASH shell prompt
- Issue the command kldload opensolaris THEN kldload zfs (you will have some warnings, just ignore them, what has been loaded can be checked with kldstat)
root@:~ # kldload opensolaris root@:~ # kldload zfs ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version: 5 ZFS storage pool version: features support (5000) root@:~ # kldstat Id Refs Address Size Name 1 10 0xc0000000 e97de8 kernel 2 2 0xc186e000 106000 opensolaris.ko 3 1 0xc1974000 3f4000 zfs.ko
- Create a zpool with a legacy version scheme (version at 28) named
oldpool
by issuing zpool create -o altroot=/tmp -o version=28 oldpool raidz /dev/ada0 /dev/ada1 /dev/ada2 - Checking the zpool status should report
oldpool
as beingONLINE
(ZFS should also complain that the legacy format is used, don't upgrade yet!):
root@:~ # zpool status pool: oldpool state: ONLINE status: The pool is formatted using a legacy on-disk format. The pool can still be used, but some features are unavailable. action: Upgrade the pool using 'zpool upgrade'. Once this is done, the pool will no longer be accessible on software that does not support feature flags. scan: none requested config: NAME STATE READ WRITE CKSUM oldpool ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 ada0 ONLINE 0 0 0 ada1 ONLINE 0 0 0 ada2 ONLINE 0 0 0 errors: No known data errors
- As the zpool has been (temporarily) mounted under /tmp/oldpool, copy some data on it by issuing a command like tar cvf /tmp/oldpool/boot-fbsd10-sparc64.tar /boot
- Export the zpool: zpool export oldpool
- Press Ctrl+A X to terminate QEMU (no need of a graceful shutdown, this is a live environment) and return to the Gentoo host shell
- The last step is to map some loop devices to the raw images:
root #
for i in {0..2}; do losetup -f /tmp/fbsd-sparc64-ada${i}.raw; done;
root #
losetup -l
NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC /dev/loop1 0 0 0 0 /tmp/fbsd-sparc64-ada1.raw 0 512 /dev/loop2 0 0 0 0 /tmp/fbsd-sparc64-ada2.raw 0 512 /dev/loop0 0 0 0 0 /tmp/fbsd-sparc64-ada0.raw 0 512
ZFS datasets
Concepts
Just like /usr/sbin/zpool is used to manage zpools, the second ZFS tool is /usr/sbin/zfs which used for any operation regarding datasets. It is extremely important to understand several concepts detailed in zfsconcepts(7) and zfs(8).
- datasets are named logical data containers managed as a single entity by the /usr/sbin/zfs command. A dataset has a unique name (path) within a given zpool and can be either a filesystem, a snapshot, a bookmark or a zvolume.
- filesystems are POSIX filesystems that can be mounted in the system VFS and appears, just like an ext4 or a XFS filesystem, as a set of files and directories. They support an extended form of POSIX ACLs (NFSv4 ACLs) and extended attributes.
Moving files between filesystem datasets even located within the same zpool is a "cp-then-rm" operation, not just an instant move.
- snapshots are frozen, read-only point-in-time states of what a filesystem or a zvolume contains. ZFS being a copy-on-write beast, a snapshot only retains what has been changed since the previous snapshot and as such, they and are approximately free to take if nothing has changed. Unlike LVM snapshots, ZFS snapshots do not require space reservation and can be of an unlimited number. A snapshot can be browsed via a "magic path" to retrieve a filesystem or a zvolume contents as it was at the time it had been taken or used to rollback the whole filesystem or zvolume it related to. They are named: zpoolname/datasetname@snapshotname.
However important things to note about snapshots:
- They do not prevent to do backups on a external system (indeed they facilitate the task a lot!), if the zpool becomes corrupt/unavailable or the dataset is destroyed, the data is gone forever.
- They are not transactional so any on going writes are not guaranteed to be stored in full in the snapshot (e.g. if 15GB of a 40GB file have been written at the time the snapshot is taken, the snapshot will held a "photo" of those 15GB only).
- The first snapshot of a zvolume may incur unexpected space implications if a reservation is set on the zvolume as it will then reserve enough space to overwrite the entire volume once on top of any space allocated already for the zvolume.
- bookmarks are like snapshots but with no data held, they simply store point in time references. They are extremely useful for doing incremental transfers to a backup system without keeping all the previous snapshots of a given dataset on the source system. Just like a bookmark left in a page of a book. Another use case of bookmarks is to make redacted datasets. They are named: zpoolname/datasetname#bookmarkname
- clones are a writable "views" of snapshots that can be mounted in the system VFS just like a filesystem can. The catch is they introduce a parent-child dependency between them and the filesystem they ultimately relates to. The consequence is that once a clone has been created, the original dataset which can no longer be destroyed as long as the clone exists. That parent-child relationship can be reversed by promoting the clone: the clone becomes the parent and the original filesystem becomes the child (this also impacts the original filesystem snapshots which are also "reversed").
- zvolumes are emulated block devices usable just like any other physical hard drive. They lies as special block device entries under the directory /dev/zvol/zpoolname.
Filesystems datasets
Whenever a zpool is created, a first filesystem dataset with the same name as the zpool is also created. This root dataset can never be destroyed, unless destroying the zpool itself. All subsequently created datasets are uniquely identified by their "path" and are always situated somewhere under this root dataset. Somewhere because subsequently created filesystems datasets can be nested and so are forming a hierarchy.
To put an illustration on the explanation, let's (re)create the zpool zpool_test
:
root #
zpool create zpool_test raidz /dev/ram0 /dev/ram1 /dev/ram2 /dev/ram3
root #
zfs list
NAME USED AVAIL REFER MOUNTPOINT zpool_test 541K 5.68T 140K /zpool_test
It can be observed that name given to the root dataset (column NAME) is zpool_test
which is the same name as the zpool). As this dataset has a mountpoint defined (mentioned in the column MOUNTPOINT) this one is a filesystem dataset. Let's check that:
root #
mount
root #
grep zpool_test
zpool_test on /zpool_test type zfs (rw,xattr,noacl)
Notice the filesystem type reported as being
zfs
meaning it is a filesystem dataset.What does it contains?
root #
ls -la /zpool_test
total 33 drwxr-xr-x 2 root root 2 May 8 19:15 . drwxr-xr-x 24 root root 26 May 8 19:15 ..
Nothing! Now, create additional filesystem datasets by issuing the commands below (notice the "paths" are specified without a leading slash):
root #
zfs create zpool_test/fds1
root #
zfs create zpool_test/fds1/fds1_1
root #
zfs create zpool_test/fds1/fds1_1/fds1_1_1
root #
zfs create zpool_test/fds1/fds1_1/fds1_1_2
root #
zfs create zpool_test/fds2
root #
zfs create zpool_test/fds2/fds2_1
The result of those latter operations being:
root #
zfs list
NAME USED AVAIL REFER MOUNTPOINT zpool_test 2.44M 5.68T 947K /zpool_test zpool_test/fds1 418K 5.68T 140K /zpool_test/fds1 zpool_test/fds1/fds1_1 279K 5.68T 140K /zpool_test/fds1/fds1_1 zpool_test/fds1/fds1_1/fds1_1_1 140K 5.68T 140K /zpool_test/fds1/fds1_1/fds1_1_1 zpool_test/fds1/fds1_1/fds1_1_2 140K 5.68T 140K /zpool_test/fds1/fds1_1/fds1_1_2 zpool_test/fds2 279K 5.68T 140K /zpool_test/fds2 zpool_test/fds2/fds2_1 140K 5.68T 140K /zpool_test/fds2/fds2_1
Interestingly, the mountpoints hierarchy, by default, is similar the very same hierarchy the filesystem datasets have. The mountpoints can be customized for something else at convenience if needed and they even can follow a totally different schema. The filesystem datasets hierarchy can be altered by renaming (zfs rename
). For example, if zpool_test/fds1/fds1_1/fds_1/fds1_1_2
should now be zpool_test/fds3
:
root #
zfs rename zpool_test/fds1/fds1_1/fds1_1_2 zpool_test/fds3
root #
tree /zpool_test
/zpool_test ├── fds1 │ └── fds1_1 │ └── fds1_1_1 ├── fds2 │ └── fds2_1 └── fds3 7 directories, 0 files
A zfs list
giving:
root #
zfs list
NAME USED AVAIL REFER MOUNTPOINT zpool_test 1.71M 5.68T 151K /zpool_test zpool_test/fds1 430K 5.68T 140K /zpool_test/fds1 zpool_test/fds1/fds1_1 291K 5.68T 151K /zpool_test/fds1/fds1_1 zpool_test/fds1/fds1_1/fds1_1_1 140K 5.68T 140K /zpool_test/fds1/fds1_1/fds1_1_1 zpool_test/fds2 279K 5.68T 140K /zpool_test/fds2 zpool_test/fds2/fds2_1 140K 5.68T 140K /zpool_test/fds2/fds2_1 zpool_test/fds3 140K 5.68T 140K /zpool_test/fds3
ZFS has also changed the mountpoint in consquence.
Better: rename a filesystem dataset with children under it like zpool_test/fds2 which becomes zpool_test/fds3_1:
root #
zfs rename zpool_test/fds2 zpool_test/fds3/fds3_1
root #
zfs list
NAME USED AVAIL REFER MOUNTPOINT zpool_test 1.70M 5.68T 151K /zpool_test zpool_test/fds1 418K 5.68T 140K /zpool_test/fds1 zpool_test/fds1/fds1_1 279K 5.68T 140K /zpool_test/fds1/fds1_1 zpool_test/fds1/fds1_1/fds1_1_1 140K 5.68T 140K /zpool_test/fds1/fds1_1/fds1_1_1 zpool_test/fds3 418K 5.68T 140K /zpool_test/fds3 zpool_test/fds3/fds3_1 279K 5.68T 140K /zpool_test/fds3/fds3_1 zpool_test/fds3/fds3_1/fds2_1 140K 5.68T 140K /zpool_test/fds3/fds3_1/fds2_1
To have "placeholders" (i.e. filesystem datasets that are intended to contain nothing but serving as defining children filesystem datasets) in the hierarchy, create the hierarchy as desired then set the property canmount to
false
for "placeholders".Here again, ZFS adjusted the mountpoints in consequence but not the names of what is under zpool_test/fds3/fds3_1, they have to be changed on an individual basis.
Rather than using zfs create
commands, the very same hierarchy could have been created with a serie of mkdir
commands. What makes things different here, just like several ext4/xfs would have been created on several disk partitions and mounted that way, is that each of those filesystem datasets are different standalone boxes where a collection of files and directories are stored so they share the same properties. ZFS cannot compress or encrypt or even share a single file, neither it can snapshot/rollback a single file but it can only do this on a filesystem dataset at whole. In other words, any action (property change, snapshot, rollback, etc) concerning zpool_test/fds1
impacts only zpool_test/fds1
, not the rest including its own children and their own children, if any. What happens in the box, stays in the box.
Try to run
zpool history zpool_test
and examine what is reported at this point.The structure exists but is somewhat empty. properties will be covered in the next section, however, before putting some data activate the compression on zpool_test/fds4 (to be created) and copy a significant amount of easily compressible data like a Linux kernel source tree:
root #
zfs create -o compression=on zpool_test/fds4
root #
cp -a /usr/src/linux/* /zpool_test/fds4
Looking at the content of /zpool_test/fds4 gives:
root #
ls -l /zpool_test/fds4
ls -l /zpool_test/fds4 total 667007 -rw-r--r-- 1 root root 496 Feb 19 17:24 COPYING -rw-r--r-- 1 root root 102088 Feb 19 17:24 CREDITS drwxr-xr-x 88 root root 103 May 13 09:26 Documentation -rw-r--r-- 1 root root 2573 Feb 19 17:24 Kbuild -rw-r--r-- 1 root root 580 May 13 09:26 Kconfig drwxr-xr-x 6 root root 6 May 13 09:26 LICENSES -rw-r--r-- 1 root root 698607 May 14 18:48 MAINTAINERS -rw-r--r-- 1 root root 71857 May 13 09:26 Makefile -rw-r--r-- 1 root root 1225558 May 15 00:31 Module.symvers -rw-r--r-- 1 root root 727 Feb 19 17:24 README -rw-r--r-- 1 root root 4144614 May 15 00:29 System.map drwxr-xr-x 25 root root 27 May 15 00:29 arch drwxr-xr-x 3 root root 213 May 15 00:31 block (...)
Nothing really exciting here, just a bunch a files and directories. Where things starts to be interesting however is when ZFS is queried for some usage statistics:
root #
zfs get logicalreferenced,referenced,refcompressratio zpool_test/fds4
NAME PROPERTY VALUE SOURCE zpool_test/fds4 logicalreferenced 8.97G - zpool_test/fds4 referenced 4.58G - zpool_test/fds4 refcompressratio 2.13x -
logicalreferenced gives the logical ("true") amount of data seen by the dataset, independently of an eventual compression while referenced gives the size of data as written on the physical storage. As we have compression active, logicalreferenced is greater than referenced.
Another manner to see the effect of compression is the following one:
root #
du -sh /zpool_test/fds4; du -sh --apparent-size /zpool_test/fds4
4.7G /zpool_test/fds4 8.5G /zpool_test/fds4
Destroying a filesystem dataset
Enough for the basis. It is now time to destroy zpool_test/fds4 by issuing:
root #
zfs destroy zpool_test/fds4
Once destroyed, a dataset can not be recovered. Ensure you have backups!
Only a "leaf" dataset can be destroyed. If a dataset has children (i.e. snapshots, filesystem datasets, etc).
zfs destroy -r
could be used to recursively destroy them as well but always use -nv
to see what zfs destroy
is going to remove before running it.Filesystem dataset properties
Likewise zpools that have properties so does datasets and filesystem datasets in the present case. Just like their zpool counterparts, properties hold by filesystem datasets can be either intrinsic (thus not being settable) or not and in that latter case they can be changed for whatever suitable value in the context. As datasets follow a hierarchy so does their properties values: a child can dataset inherits from the properties of its parent dataset, that parent inheriting from its own parent so far and so forth until the root dataset is reached. That latter also dataset inherits of some properties of the zpool it is located in. If a given dataset overrides at its level a property value, that value is propagated to the whole hierarchy lying underneath it until another dataset overrides it again on its own. Rince and repeat.
To view the properties of a dataset, the logic is similar to what has been seen for zpools: zfs get all zpool/the/dataset/to/examine
to view all properties or zfs get theproperty zpool/the/dataset/to/examine
for a specific one. Let's start by examining that now so famous root dataset:
root #
zfs get all zpool_test
NAME PROPERTY VALUE SOURCE zpool_test type filesystem - zpool_test creation Tue May 9 16:07 2023 - zpool_test used 1.69M - zpool_test available 5.68T - zpool_test referenced 140K - zpool_test compressratio 1.00x - zpool_test mounted yes - zpool_test quota none default zpool_test reservation none default zpool_test recordsize 128K default zpool_test mountpoint /zpool_test default zpool_test sharenfs off default zpool_test checksum on default zpool_test compression off default zpool_test atime on default zpool_test devices on default zpool_test exec on default zpool_test setuid on default zpool_test readonly off default zpool_test zoned off default zpool_test snapdir hidden default zpool_test aclmode discard default zpool_test aclinherit restricted default zpool_test createtxg 1 - zpool_test canmount on default zpool_test xattr on default zpool_test copies 1 default zpool_test version 5 - zpool_test utf8only off - zpool_test normalization none - zpool_test casesensitivity sensitive - zpool_test vscan off default zpool_test nbmand off default zpool_test sharesmb off default zpool_test refquota none default zpool_test refreservation none default zpool_test guid 17939734310320752336 - zpool_test primarycache all default zpool_test secondarycache all default zpool_test usedbysnapshots 0B - zpool_test usedbydataset 140K - zpool_test usedbychildren 1.55M - zpool_test usedbyrefreservation 0B - zpool_test logbias latency default zpool_test objsetid 54 - zpool_test dedup off default zpool_test mlslabel none default zpool_test sync standard default zpool_test dnodesize legacy default zpool_test refcompressratio 1.00x - zpool_test written 140K - zpool_test logicalused 449K - zpool_test logicalreferenced 42K - zpool_test volmode default default zpool_test filesystem_limit none default zpool_test snapshot_limit none default zpool_test filesystem_count none default zpool_test snapshot_count none default zpool_test snapdev hidden default zpool_test acltype off default zpool_test context none default zpool_test fscontext none default zpool_test defcontext none default zpool_test rootcontext none default zpool_test relatime off default zpool_test redundant_metadata all default zpool_test overlay on default zpool_test encryption off default zpool_test keylocation none default zpool_test keyformat none default zpool_test pbkdf2iters 0 default zpool_test special_small_blocks 0 default
All properties will not be discussed and demonstrated here but a few commonly used. Refer to zfsprops(7) for more detailed descriptions.
To start with an obvious and already seen property: type. That one describes what the dataset nature is and as discussed above, this one is a filesystem
dataset. Nothing really exciting there but this also another manner to determine the fact.
Going on with the SOURCE column: while some values are set to defaults
some others are set to a single dash (-
). There is a little secret here being: any property not having a dash in the SOURCE column can be changed, all "dashed" properties are intrinsic. Obviously, the dataset creation time, its compression ratio or the available space left are intrinsic and changing them makes an absolute no-sense.
At first glance, we can focus on some intrinsic properties:
Property | Function |
---|---|
type | Describes the dataset type. In that case it is a filesystem but for some other found types are volume, snapshot, etc. |
used | The current physical size (i.e. as stored on the physical storage) of the dataset including its children whatever types they are. As the dataset currently contains only some metadata (no files put inside yet), just a tiny amount is shown here. If the compression is in use, the value of used can be smaller than the value of logical (df also reports that).
|
logical | The current apparent size (i.e. the "true" size) the dataset including its children whatever types they are. As the dataset currently contains only some metadata (no files put inside yet), just a tiny amount is shown here. If the compression is in use, the value of logical can be greater than the value of used (df --apparent size also reports that).
|
available | The current size available for data storage. If a dataset has been told to handle several copies of a file and/or if snapshots retains a lot of data, the available space can be hogged very quickly. |
compressratio | The ratio between the "true" data size and its size as stored physically speaking. As the dataset is not compressed, the ratio is 1 but with compressed datasets that value can be more: if 110MB of data takes 100MB physically speaking because of the compression is slightly efficient, 1.10X would be shown here. Data that be aggressively compressed will show higher figures here. |
mounted | Indicates if the filesystem dataset is currently mounted somewhere within the VFS or not (you will also see it with the mount command).
|
referenced | Amount of data accessible (true physical size) by this dataset on the zpool . As we have no files on the dataset yet but only some metadata, the amount is very tiny and similar to what is shown for used. When clones and snapshots will appear, this value will vary. If compression is used, referenced can be smaller than logicalreferenced. |
logicalreferenced | Amount of data accessible (apparent size) by this dataset on the zpool . As we have no files on the dataset yet but only some metadata, the amount is very tiny and similar to what is shown for used. When clones and snapshots will appear, this value will vary. If compression is used, logicalreferenced can be greater than referenced. |
version | It is not the version of the dataset but indicates the version of the ZFS on-disk format used by this dataset. For more than a decade, that number is still at version 5, even under Solaris 11.4 (now at its sunset to not say defunct since September 2017). If the ZFS on-disk format specification would evolve in the future, that version will be incremented. Not to be confused with zpools legacy version numbers as well. |
written | The amount of space that was written since the previous snapshot or in other words,the amount of data referenced by the previous dataset snapshot. |
Some other settable properties of interest:
Property | Value | Function |
---|---|---|
mountpoint | path|legacy|none | Specifies the mountpoint for the dataset as being path. A mountpoint set to none prevents the dataset from being mounted. When mountpoint set to legacy: the mountpoint information will be searched in /etc/fstab AND it is possible to use traditional mount command with the dataset (mount -t path/to/the/dataset /where/to/mount/it ). This is perhaps the most commonly changed attribute (along with recordsize, quota and compression).
|
canmount | yes|no | Specifies if a dataset can be mounted (yes ) or not (no ). This property allows to "hide" a dataset without altering the current value of its property mountpoint. (canmount=no is an equivalent of mountpoint=none ).
|
quota | quota_value|none | Set a maximum space usage for the dataset including its descendants (see also refquota). E.g. zfs set quota=4G sets a 4GB space usage limit. If the value is none the dataset has no size limit (remember how tedious/tricky the task can be on "traditional" filesystems?). Also, take note that ZFS has support for user quota, group quota and project quota.
|
recordsize | recordsize_size | Specifies the block size for files as being recordsize_size in that filesystem. This property is especially useful in the case of databases where the filesystem I/O operations must be carefully aligned with what the database requires. By default, blocks are of 128k each. |
compression | on|off|lzjb|lz4|zle|gzip{,-N}|zstd{,-fast}{,-N} | Specifies if the dataset content has compressed (and decompressed) on the fly. off means no compression, on means compression with the default method which is lz4 on zpools having feature@lz4_compress=enabled and lzjb otherwise. zstd can be used on zpools having feature@zstd_compress=enabled (it is also possible to give an explicit compression level for gzip and zstd). Compression and decompression are handled behind the scene in a transparent manner. Compressing datasets can drastically reduce the amount of I/O operations (at the cost of spending CPU cycles in the compression/decompression process).
|
sharenfs | on|off|nfsoptions | Shares the dataset via NFS (automatically adjusts /etc/exports and invokes exportfs). |
sharesmb | on|off|smboptions | shares the dataset via Samba (automatically adjusts /etc/samba/smb.conf) |
exec | on|off | Controls if programs can be executed on the dataset and shared libraries (.so files) can be loaded as well. This has the same effect of a mount -o noexec ... if the value is off .
|
setuid | on|off | Controls if the SUID or GUID bits are honored on the dataset This has the same effect of a mount -o nosuid ... if the value is off .
|
readonly | on|off | Controls whether a filesystem allows writes (off ) or has to be mounted as being read-only (on ).
|
atime | on|off | Controls whether atime is updated for files on the filesystem. If keeping the access time to a file is not used, turning that property off can remove some overhead especially if a lot of files are accessed. |
xattr | on|off|sa | Controls whether extended attributes are enabled for this file system. By default (on ) enables directory-based attributes which can result in significant I/O overhead. Setting to sa can help to mitigate this. MDAC systems like SELinux require enabling extended attributes support, the same with POSIX ACL (Linux specific). The NFSv4 (FreeBSD only) are not stored in extended attributes.
|
encryption | on|off|algorithm | Controls whether the data is encrypted (on ) or not (off ). By default, AES-256-GCM is used unless a specific encryption algorithm is set. The zpool must have feature@encrypted=enabled and a keyformat must also be provided at dataset creation time. When a dataset is encrypted, ZFS encrypts the data and and some metadata as well but not the zpool structure. Refer to zfs-load-key (8) for details. It is possible to change the encryption keys at a later time if needed (compromised key or any other reason).
|
If a property alters the state of stored data (e.g. encryption, compression, etc) the effect of a value change applies only to newly added or modified data only. If the value change does not alter the state of the stored data (e.g. NFS/SMB sharing, quota, etc) the new property value is immediately effective.
First things first, start by enabling data compression on the root dataset and see what happens:
root #
zfs get compression zpool_test
root #
zfs get compression zpool_test/fds1
NAME PROPERTY VALUE SOURCE zpool_test/fds1 compression on inherited from zpool_test
For what lies under the result, summarized below, is:
NAME PROPERTY VALUE SOURCE zpool_test compression on local zpool_test/fds1 compression on inherited from zpool_test zpool_test/fds1/fds1_1 compression on inherited from zpool_test zpool_test/fds1/fds1_1/fds1_1_1_1 compression on inherited from zpool_test
For the filesystem dataset property zpool_test the local
tells us that the default value has been overridden here. Because no override was done for zpool_test/fds1
and all of its children inherits from that value and ZFS being smart, it mentions from where the inherited value comes from.
Now, turning the value of compression to off
for zpool_test/fds1/fds_1_1
gives:
NAME PROPERTY VALUE SOURCE zpool_test compression on local zpool_test/fds1 compression on inherited from zpool_test zpool_test/fds1/fds1_1 compression off local zpool_test/fds1/fds1_1/fds1_1_1_1 compression on inherited from zpool_test/fds1/fds1_1
There two overrides.
To reset the inheritance from a given level to the lowest level of the hierarchy, a very useful command is this one:
root #
zfs inherit -r compression zpool_test/fds1
NAME PROPERTY VALUE SOURCE zpool_test/fds1/fds1_1 compression on inherited from zpool_test
The SOURCE is no longer
local
but now inherits again from the parent.Another demonstration before closing the section: setting usage quotas. Set the quota of zpool_test/fds1
and zpool_test/fds1/fds1_1
like below:
root #
zfs set quota=5G zpool_test/fds1
root #
zfs set quota=2G zpool_test/fds1/fds1_1
The quota property not only defines the a space usage hard limit for the filesystem dataset and its children but that limit calculation also includes the amount of data retained by eventual snapshots. To put a limit exclusively on the "live" filesystem datasets (i.e. ignoring snapshots whatever size they are), set the property refquota instead. That latter only limits the amount of data a filesystem datasets directly sees.
First test, put a file bigger than 2GB directly under zpool_test/fds1/fds1_1_1:
root #
dd if=/dev/random of=/zpool_test/fds1/fds1_1/fds1_1_1/test1.dd bs=1G count=3
dd: error writing '/zpool_test/fds1/fds1_1/fds1_1_1/test1.dd': Disk quota exceeded 2+0 records in 1+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 3.51418 s, 306 MB/s
Remember, the value set for zpool_test/fds1/fds1_1 also applies to zpool_test/fds1/fds1_1/fds1_1_1 because of inheritance so both zpool_test/fds1/fds1_1 AND zpool_test/fds1/fds1_1/fds1_1_1 have a 2G quota limit. Let's ajust things a little bit and set the quota value of zpool_test/fds1/fds1_1/fds1_1_1 to none
(unlimited) and try again:
root #
zfs set quota=none zpool_test/fds1/fds1_1/fds1_1_1
root #
dd if=/dev/random of=/zpool_test/fds1/fds1_1/fds1_1_1/test1.dd bs=1G count=3
3+0 records in 3+0 records out 3221225472 bytes (3.2 GB, 3.0 GiB) copied, 5.39856 s, 597 MB/s
This ends the grand tour. You know how to create and rename a filesystem dataset, you also have a good overview of how properties can be set and inherited between a parent and its children.
To free some space before the next section:
root #
find /zpool_test -name '*.dd' -delete
Sharing a ZFS dataset via NFS/CIFS
A ZFS filesystem dataset can be simply shared via NFS and/or SMBFS/CIFS. No magic here, ZFS will adjust the contents of /etc/exports.d/zfs.exports and /etc/samba/smb.conf (Samba) for you behind the scenes. To share a dataset, simply set the properties sharenfs and/or sharesmb according to the protocol you want to use. Both protocols are not mutually exclusive but be careful especially in the case of files opened in read/write mode as the locking mechanisms of NFS and SMBFS/CIFS will not be aware about what the other locks.
Let's create a shared filesystem dataset named zpool_test/share_test
and share it via NFS to start with:
root #
zfs create -o sharenfs=on zpool_test/share_test
root #
zfs get sharenfs test/share_test
NAME PROPERTY VALUE SOURCE zpool_test/share_test sharenfs on local
Notice the value
local
for the property SOURCE. This indicates that the default inherited value has been overriden at this depth of the hierachy.On the machine itself, notice what has been added in /etc/exports.d/zfs.exports:
# !!! DO NOT EDIT THIS FILE MANUALLY !!!
/zpool_test/share_test *(sec=sys,rw,no_subtree_check,mountpoint,crossmnt)
Now, listing what the host exports to NFS clients gives:
root #
showmount --exports 127.0.0.1
Export list for 127.0.0.1: /zpool_test/share_test *
To pass NFS options, pass them rather the simple value
on
.E.g. zfs set sharenfs=ro,no_root_squash ...
. Refer to the exports (5)
manual page.If the filesystem dataset has to be also visible as a CIFS/SMB Samba share, the idea is the same assuming an already functional Samba general configuration is already present on the machine. Before going any further, ensure you have at least the following parameters set in /etc/samba/smb.conf else ZFS will silently fail to add shares:
# ZFS
usershare path = /var/lib/samba/usershares
usershare max shares = 100
Also ensure that the /var/lib/samba/usershares directory exists and has adequate ownership (e.g. root:root
) and permissions (01770
).
root #
zfs set sharesmb=on zpool_test/share_test
NAME PROPERTY VALUE SOURCE zpool_test/share_test sharenfs on local
If
zfs set sharesmb=on
reports the error SMB share creation failed
, check if the directory /var/lib/samba/usershares exists with adequate permissions as described just above.Once the share has been defined, ZFS will add a file whose name is the same as the shared dataset in /var/lib/samba/usershares:
root #
ls -l /var/lib/samba/usershares
total 6 -rw-r--r-- 1 root root 146 Jul 1 10:35 zpool_test_share_test
#VERSION 2
path=/zpool_test/share_test
comment=Comment: /zpool_test/share_test
usershare_acl=S-1-1-0:F
guest_ok=n
sharename=zpool_test_share_test
It is possible to use delegations to allow users to create and share datasets. This is a more advanced concept being out of scope of this section.
Of course it is possible to not use those facilities and defines the NFS/Samba shares by hand in the adequate configuration files if it more convenient in the context. However, using properties is more convenient and tends to keep the management easier.
Zvolumes datasets
A zvolume is nothing more than an emulated block device over ZFS and it can be used just like any other block device: it can be partitioned with fdisk then a filesystem (like ext4,xfs or anything else at convenience) can be created on it and then be mounted. Technically speaking, it is even possible to create another zpool on a zvolumes!
Likewise filesystems datasets, zvolumes also handles a set of properties that can be altered (or not). Their true power,however, resides in data management: just like filesystems datasets, zvolumes can be snapshotted to be then either rolledback or cloned.
To create a zvolume, just use zfs create
like below:
- Normal zvolume (space entirely pre-allocated) zvolume: zfs create -V <zvol_size> ...
- Sparse zvolume (thin provisioned): zfs create -s -V <zvol_size> ... (notice
-s
)
The following creates a 1G zvolume zpool_test/zvol1 will all space pre-allocated and another 2G zvolume zpool_test/zvol2 thin-provisioned this time:
root #
zfs create -V 1G zpool_test/zvol1
root #
zfs create -s -V 2G zpool_test/zvol2
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 1.37G 2.17G 128K /zpool_test zpool_test/zvol1 1.37G 3.54G 74.6K - zpool_test/zvol2 74.6K 2.17G 74.6K -
Notice the values in the column USED
Unlike filesystem datasets, zvolumes cannot have in a hierarchy with another zvolume. They always have to be created under a filesystems datasets.
It is also possible to create a hierarchy with "placeholders" (i.e. non-mountable filesystems datasets) to get better organization:
root #
zfs create -V 1G zpool_test/VM/zvol1
root #
zfs create -s -V 2G zpool_test/VM/zvol2
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 1.37G 2.17G 128K /zpool_test zpool_test/VM 1.37G 2.17G 128K none zpool_test/VM/zvol1 1.37G 3.54G 74.6K - zpool_test/VM/zvol2 74.6K 2.17G 74.6K -
Whatever the organization of the zvolumes is, several block devices entries are created in parallel under /dev and /dev/zvol/<zpool_name>:
root #
ls -l /dev/zvol/zpool_test/VM
total 0 lrwxrwxrwx 1 root root 12 May 18 09:05 zvol1 -> ../../../zd0 lrwxrwxrwx 1 root root 13 May 18 09:05 zvol2 -> ../../../zd16
The referenced special entries being:
root #
ls -l /dev/zd*
brw-rw---- 1 root disk 230, 0 May 18 09:05 /dev/zd0 brw-rw---- 1 root disk 230, 16 May 18 09:05 /dev/zd16
Run fdisk or parted to check what it reports:
root #
parted /dev/zvol/zpool_test/VM/zvol1
GNU Parted 3.6 Using /dev/zd0 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Error: /dev/zd0: unrecognised disk label Model: Unknown (unknown) Disk /dev/zd0: 1074MB Sector size (logical/physical): 512B/8192B Partition Table: unknown Disk Flags: (parted)
zvolumes always report a physical sector size of 512 bytes while their logical sector size is governed by the property volblocksize (8K by default as of OpenZFS 2.1). volblocksize is analogous to blocksize used in filesystem datasets. Refer to Workload Tuning/zvol-volblocksize in the official OpenZFS documentation for performance tuning details.
From parted, create a primary partition that will hold an ext4 filesystem by, first creating a GPT (or MSDOS) label, then create the partition itself:
- mklabel gpt
- mkpart primary ext4 2048s -1
- q (to exit from parted)
(parted) mklabel gpt (parted) mkpart primary ext4 2048s -1 (parted) p Model: Unknown (unknown) Disk /dev/zd0: 1074MB Sector size (logical/physical): 512B/8192B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 1049kB 1073MB 1072MB ext4 primary (parted) q
Now just format new partition as ususal:
root #
mkfs -t ext4 /dev/zd0p1
mke2fs 1.47.0 (5-Feb-2023) Discarding device blocks: done Creating filesystem with 261632 4k blocks and 65408 inodes Filesystem UUID: 9c8ae6ae-780a-413b-a3f9-ab45d97fd8b8 Superblock backups stored on blocks: 32768, 98304, 163840, 229376 Allocating group tables: done Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done
.. and mount it where desired:
root #
mkdir /mnt/ext4test
root #
mount -t ext4 /dev/zd0p1 /mnt/ext4test
root #
df -h
root #
grep ext4test
/dev/zd0p1 988M 24K 921M 1% /mnt/ext4test
ZFS Snapshots (and rolling datasets back)
Just like a relational database can be backed-up and recovered at precise points in time, a ZFS dataset state can be "photographed" and then restored just like if nothing has ever happened since the snapshot had been taken. That kind of feature is not exclusive to ZFS: BTRFS and NILFS2 offer a similar functionality and LVM also supports snapshots. The major difference between snapshots in Copy-on-Write filesystems like ZFS, BTRFS or NILFS2 and their LVM counterpart is they do not have a pre-established size. Moreover, they never become invalid if too much data changes and it is possible to have, virtually, an infinite number of them, each one holding the data difference with its predecessor. As such, if nothing changes between two snapshots, the only used space is a couple of metadata (a matter of just some kilobytes).
Contrary to BTRFS snapshots, ZFS snapshots are read-only things. ZFS has the concept of a writable snapshot which is called a clone, more on this later.
To take a snapshot, the ZFS command is zfs snapshot
followed by a snapshot name following the convention zpool/the/dataset/to/be/snaphotted@snapshotname
. Any alphanumeric characters sequence can be used as a snapshot name: mysnap
, 20221214
or test123
are all valid snapshots names. The only constraint to be respected is the usage of the arobase character as being the separator between the dataset name and the snapshot name.
Only filesystems datasets and zvolumes can be snapshotted. It is not possible to snapshot a snapshot or a bookmark!
Once a snapshot has been taken, there is no need to do anything. ZFS will manage the differences behind the scenes in a transparent manner. As long as snapshots are not destroyed, no cleanup is done and all of the changes history will be retained, whatever the changes are (addition/deletion or modification of existing data). Once a snapshot is destroyed, ZFS will inspect the dataset snapshots timeline and will free all blocks not referenced anymore.
Quota management can be a bit tricky with snapshots: if a filesystem having small files but with a huge number of changes between snapshots, the total size of a snapshot timeline can also be huge and the quota limit can be quickly reached even the "current" dataset state is way below the threshold. The same would happen if just a couple of huge files changes between snapshots.
Enough said, time to demonstrate. First let's create a new dataset and copy some files in it:
root #
zfs create zpool_test/testfsds1
root #
cp -r /usr/src/linux/drivers/* /zpool_test/testfsds1
root #
df -h
Filesystem Size Used Avail Use% Mounted on zpool_test 433M 256K 433M 1% /zpool_test zpool_test/testfsds1 5.0G 4.6G 433M 92% /zpool_test/testfsds1
Nothing special to say at that point. Just notice the reported used size of the root root dataset is the same as the size of zpool_test/testfsds1
(433M). As the root dataset contains just a couple of metadata and no files, it occupies only a couple of KB.
Now let's take a first snapshot named snap1
:
root #
zfs snapshot zpool_test/testfsds1@snap1
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.50G 433M 151K /zpool_test zpool_test/testfsds1 4.50G 433M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 0B - 4.50G -
So far so good, at first glance it can be noticed that the snapshot uses 0 bytes (USED shows 0
) because we have no data changes yet. In other words, the filesystem dataset zpool_test/testfsds1
and its snapshot zpool_test/testfsds1@snap1
refers to the exactly same data blocks.
Let's present this from another prospective:
- The filesystem dataset
zpool_test/testfsds1
has as size of (column USED) 4.50G. - The filesystem dataset
zpool_test/testfsds1
refers to (column REFER) 4.50G of data. At this time both columns column USED and REFER shows identical values, this is perfectly normal - The snapshot also references the very same 4.50G of data so its size is... zero (the snapshot "sees" the very same data than the filesystem dataset also "sees", so the difference between both are zero).
Remember that zfs get
command seen earlier? Let's it on a snapshot:
root #
zfs get all zpool_test/testfsds1@snap1
NAME PROPERTY VALUE SOURCE zpool_test/testfsds1@snap1 type snapshot - zpool_test/testfsds1@snap1 creation Sat Jul 1 17:52 2023 - zpool_test/testfsds1@snap1 used 0B - zpool_test/testfsds1@snap1 referenced 4.50G - zpool_test/testfsds1@snap1 compressratio 1.00x - zpool_test/testfsds1@snap1 devices on default zpool_test/testfsds1@snap1 exec on default zpool_test/testfsds1@snap1 setuid on default zpool_test/testfsds1@snap1 createtxg 6470 - zpool_test/testfsds1@snap1 xattr on default zpool_test/testfsds1@snap1 version 5 - zpool_test/testfsds1@snap1 utf8only off - zpool_test/testfsds1@snap1 normalization none - zpool_test/testfsds1@snap1 casesensitivity sensitive - zpool_test/testfsds1@snap1 nbmand off default zpool_test/testfsds1@snap1 guid 17727341261301786665 - zpool_test/testfsds1@snap1 primarycache all default zpool_test/testfsds1@snap1 secondarycache all default zpool_test/testfsds1@snap1 defer_destroy off - zpool_test/testfsds1@snap1 userrefs 0 - zpool_test/testfsds1@snap1 objsetid 2085 - zpool_test/testfsds1@snap1 mlslabel none default zpool_test/testfsds1@snap1 refcompressratio 1.00x - zpool_test/testfsds1@snap1 written 4.50G - zpool_test/testfsds1@snap1 logicalreferenced 4.31G - zpool_test/testfsds1@snap1 acltype off default zpool_test/testfsds1@snap1 context none default zpool_test/testfsds1@snap1 fscontext none default zpool_test/testfsds1@snap1 defcontext none default zpool_test/testfsds1@snap1 rootcontext none default zpool_test/testfsds1@snap1 encryption off default
Without commenting every property shown here is the most important:
- type: as this is a snaphot(dataset), the reported type is obviously...
snapshot
- creation: The date/time the snapshot has been taken
- used: nearly zero as the snapshot and the corresponding filesystem dataset both point to the same contents (the 8.24M corresponds to the snapshot metadata).
- referenced: the same value seen before, 4.50G (see explanation above)
- createtxg: the transaction group (TXG) number in which the snapshot has been created (TXG numbers are always increased over time). This is useful to back-trace the order in which the snapshots of a given filesystem dataset have been taken if their naming is inconsistent (e.g.
zpool_test/testfsds1@snap1
thenzpool_test/testfsds1@mytest
thenzpool_test/testfsds1@bug412
and so on).
Now, a snapshot exists, let's delete some files but first things first determine the amount of data to be deleted:
root #
du -csh /zpool_test/testfsds1/{a,b,c}*
16M /zpool_test/testfsds1/accel 580K /zpool_test/testfsds1/accessibility 51M /zpool_test/testfsds1/acpi 81K /zpool_test/testfsds1/amba 433K /zpool_test/testfsds1/android 8.4M /zpool_test/testfsds1/ata 1016K /zpool_test/testfsds1/atm 274K /zpool_test/testfsds1/auxdisplay 19M /zpool_test/testfsds1/base 299K /zpool_test/testfsds1/bcma 39M /zpool_test/testfsds1/block 44M /zpool_test/testfsds1/bluetooth 71K /zpool_test/testfsds1/built-in.a 7.1M /zpool_test/testfsds1/bus 739K /zpool_test/testfsds1/cdrom 45M /zpool_test/testfsds1/char 26M /zpool_test/testfsds1/clk 1.7M /zpool_test/testfsds1/clocksource 4.3M /zpool_test/testfsds1/comedi 1.3M /zpool_test/testfsds1/connector 3.9M /zpool_test/testfsds1/counter 9.6M /zpool_test/testfsds1/cpufreq 2.1M /zpool_test/testfsds1/cpuidle 30M /zpool_test/testfsds1/crypto 537K /zpool_test/testfsds1/cxl 309M total
Now remove the files and take a second snapshot:
root #
rm -rf /zpool_test/testfsds1/{a,b,c}*
root #
zfs snap zpool_test/testfsds1@snap2
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.51G 432M 151K /zpool_test zpool_test/testfsds1 4.50G 432M 4.20G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 307M - 4.50G - zpool_test/testfsds1@snap2 0B - 4.20G -
At first glance, the snapshot size of zpool_test/testfsds1@snap1
roughly increased from 0 byte to, roughly, the size of the deleted data. In other words:
zpool_test/testfsds2@snap1
holds no differences with the current state ofzpool_test/testfsds1
, hence a 0 byte used. That latter snapshot references ("sees") to 4.20G of data (4.50G-307M ~ 4.20G), hence the 4.20G shown in the columnREFER
- As 307M of data has been deleted since
zpool_test/testfsds1
has been taken, the difference betweenzpool_test/testfsds1@snap1
andzpool_test/testfsds1@snap2
is also 307M (the calculation is not exactly the same between ZFS anddf
) - As the original size of
zpool_test/testfsds1
(before the files deletion) was 4.50G,zpool_test/testfsds1@snap1
still sees that original state as it was hence the 4.50G shown in the column REFER).
Before going one step further, a (magic) trick: although the snapshot is shown as being non-mountable (a dash is present in the column MOUNTPOINT), it is possible to access its contents in a read-only form (snapshots are not writable) under the path /zpool_test/testfsds1/.zfs/snapshot/snap1:
root #
ls -l /zpool_test/testfsds1/.zfs/snapshot
total 0 drwxrwxrwx 1 root root 0 Jul 1 17:52 snap1 drwxrwxrwx 1 root root 0 Jul 1 18:15 snap2
root #
ls -l /zpool_test/testfsds1/.zfs/snapshot/snap1
total 1749 -rw-r--r-- 1 root root 4004 Jul 1 17:48 Kconfig -rw-r--r-- 1 root root 5543 Jul 1 17:48 Makefile drwxr-xr-x 4 root root 7 Jul 1 17:48 accel drwxr-xr-x 4 root root 6 Jul 1 17:48 accessibility drwxr-xr-x 10 root root 304 Jul 1 17:48 acpi drwxr-xr-x 2 root root 10 Jul 1 17:48 amba drwxr-xr-x 2 root root 15 Jul 1 17:48 android drwxr-xr-x 3 root root 152 Jul 1 17:48 ata drwxr-xr-x 2 root root 32 Jul 1 17:48 atm drwxr-xr-x 2 root root 23 Jul 1 17:48 auxdisplay drwxr-xr-x 6 root root 110 Jul 1 17:48 base drwxr-xr-x 2 root root 26 Jul 1 17:48 bcma drwxr-xr-x 9 root root 100 Jul 1 17:48 block drwxr-xr-x 2 root root 251 Jul 1 17:48 bluetooth -rw-r--r-- 1 root root 67032 Jul 1 17:48 built-in.a drwxr-xr-x 4 root root 39 Jul 1 17:48 bus drwxr-xr-x 2 root root 11 Jul 1 17:48 cdrom drwxr-xr-x 10 root root 102 Jul 1 17:48 char drwxr-xr-x 51 root root 161 Jul 1 17:48 clk drwxr-xr-x 2 root root 102 Jul 1 17:48 clocksource drwxr-xr-x 4 root root 16 Jul 1 17:48 comedi (...)
Notice the presence of files and directories deleted by rm -rf {a,b,c}*
just after the snapshot had been created. With that in hands, it is possible to copy or inspect the files as they were at the precise point in time the snapshot had been taken. Extremely useful to restore altered or deleted files!
If we inspect the second snapshot, it can be noticed that no files/directories starts with a "a","b" or "c" in their name because they has been deleted just before zpool_test/testfsds1@snap2
has been taken:
root #
ls -l /zpool_test/testfsds1/.zfs/snapshot/snap2
total 1749 -rw-r--r-- 1 root root 4004 Jul 1 17:48 Kconfig -rw-r--r-- 1 root root 5543 Jul 1 17:48 Makefile drwxr-xr-x 4 root root 53 Jul 1 17:48 dax drwxr-xr-x 2 root root 21 Jul 1 17:48 dca drwxr-xr-x 3 root root 20 Jul 1 17:48 devfreq drwxr-xr-x 2 root root 6 Jul 1 17:48 dio drwxr-xr-x 20 root root 113 Jul 1 17:48 dma drwxr-xr-x 3 root root 49 Jul 1 17:48 dma-buf drwxr-xr-x 2 root root 209 Jul 1 17:48 edac drwxr-xr-x 2 root root 9 Jul 1 17:48 eisa (...)
Great! But no so much indeed. It would be much more convenient to know the precise differences between two snapshots directly rather than manually inspecting each one. Fortunately, ZFS brought a solution and allows to diff between snapshots (the output has been truncated):
root #
zfs diff zpool_test/testfsds1@snap1 zpool_test/testfsds1@snap2 | sort
- /zpool_test/testfsds1/accel - /zpool_test/testfsds1/accel/Kconfig - /zpool_test/testfsds1/accel/Makefile - /zpool_test/testfsds1/accel/drm_accel.c - /zpool_test/testfsds1/accel/habanalabs (...) - /zpool_test/testfsds1/base - /zpool_test/testfsds1/base/.attribute_container.o.cmd - /zpool_test/testfsds1/base/.auxiliary.o.cmd - /zpool_test/testfsds1/base/.built-in.a.cmd - /zpool_test/testfsds1/base/.bus.o.cmd - /zpool_test/testfsds1/base/.cacheinfo.o.cmd - /zpool_test/testfsds1/base/.class.o.cmd - /zpool_test/testfsds1/base/.component.o.cmd - /zpool_test/testfsds1/base/.container.o.cmd (...) - /zpool_test/testfsds1/clk - /zpool_test/testfsds1/clk/.built-in.a.cmd - /zpool_test/testfsds1/clk/.clk-bulk.o.cmd - /zpool_test/testfsds1/clk/.clk-composite.o.cmd - /zpool_test/testfsds1/clk/.clk-devres.o.cmd - /zpool_test/testfsds1/clk/.clk-divider.o.cmd - /zpool_test/testfsds1/clk/.clk-fixed-factor.o.cmd - /zpool_test/testfsds1/clk/.clk-fixed-rate.o.cmd (...) M /zpool_test/testfsds1/
What the command tells is basically: all files and directories whose name starts with "a", "b" and "c" has been removed (notice the dash on the left). Hence due to all of the changes inside, the path /zpool_test/testfsds1 has been modified (notice the M
on the left of the very last line).
At this point, let's destroy even more files and create another snapshot again (zpool_test/testfsds1@snap3
):
root #
find -name Makefile -delete
root #
zfs snap zpool_test/testfsds1@snap3
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.53G 410M 151K /zpool_test zpool_test/testfsds1 4.53G 410M 4.19G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 307M - 4.50G - zpool_test/testfsds1@snap2 186K - 4.20G - zpool_test/testfsds1@snap3 0B - 4.19G -
Notice that:
- because
zpool_test/testfsds1@snap3
reflects the current state ofzpool_test/testfsds1
, its size is zero (more or less some metadata of negligible size) relatively to the current state of the datasetzpool_test/testfsds1
. - The relative of
zpool_test/testfsds1@snap2
relatively tozpool_test/testfsds1@snap3
corresponds to the deleted Makefiles (186K), metadata included - The size of
zpool_test/testfsds1@snap2
relatively tozpool_test/testfsds1@snap1
remains the same (307M)
If zfs diff
is used again (the grep
command in the middle cleans the list up):
root #
zfs diff zpool_test/testfsds1@snap2 zpool_test/testfsds1@snap3 | grep -v '^M' | sort
- /zpool_test/testfsds1/Makefile - /zpool_test/testfsds1/dax/Makefile - /zpool_test/testfsds1/dax/hmem/Makefile - /zpool_test/testfsds1/dax/pmem/Makefile - /zpool_test/testfsds1/dca/Makefile - /zpool_test/testfsds1/devfreq/Makefile - /zpool_test/testfsds1/devfreq/event/Makefile (...)
Non-consecutive snapshots can be diffed. Try:
zfs diff zpool_test/testfsds1@snap1 zpool_test/testfsds1@snap3
and observe the result.Now, remove everything in /zpool_test/testfsds1
and observe how each snapshot size evolves:
root #
rm -rf /zpool_test/testfsds1/*
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.53G 406M 151K /zpool_test zpool_test/testfsds1 4.53G 406M 12.2M /zpool_test/testfsds1 zpool_test/testfsds1@snap1 307M - 4.50G - zpool_test/testfsds1@snap2 186K - 4.20G - zpool_test/testfsds1@snap3 22.0M - 4.19G -
So:
root #
ls -la /zpool_test/testfsds1
total 1 drwxr-xr-x 2 root root 2 Jul 1 19:04 . drwxr-xr-x 3 root root 3 Jul 1 17:47 ..
Oooops... Empty directory!
A way to restore the contents just before the deletion happened, is to copy the contents of /zpool_test/testfsds1/.zfs/snapshot/snap3 but this will duplicate data blocks (this might not be true with OpenZFS 2.2 and its block cloning feature) but anyway this is an inelegant way to recover the data. What can be done as this point is a rollback.
A rollback restores a dataset state to what is was at a previous snapshot. In the present case, we want to restore the state of zpool_test/testfsds1
at it was at the time the snapshot zpool_test/testfsds1@snap3
has been taken. To achieve this, the command to use is zfs rollback
:
root #
zfs rollback zpool_test/testfsds1@snap3
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.53G 410M 151K /zpool_test zpool_test/testfsds1 4.53G 410M 4.19G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 307M - 4.50G - zpool_test/testfsds1@snap2 186K - 4.20G - zpool_test/testfsds1@snap3 0B - 4.19G -
Et voila! Notice the size of zpool_test/testfsds1@snap3
relatively to zpool_test/testfsds1
: as the dataset has been rolled back, the content "seen" by both is identical hence the 0-byte difference. Listing /zpool_test/testfsds1 shows some files again.
root #
ls -la /zpool_test/testfsds1
|total 1344 drwxr-xr-x 116 root root 118 Jul 1 18:41 . drwxr-xr-x 3 root root 3 Jul 1 17:47 .. -rw-r--r-- 1 root root 4004 Jul 1 17:48 Kconfig drwxr-xr-x 4 root root 52 Jul 1 18:41 dax drwxr-xr-x 2 root root 20 Jul 1 18:41 dca drwxr-xr-x 3 root root 19 Jul 1 18:41 devfreq drwxr-xr-x 2 root root 5 Jul 1 18:41 dio drwxr-xr-x 20 root root 112 Jul 1 18:41 dma drwxr-xr-x 3 root root 48 Jul 1 18:41 dma-buf drwxr-xr-x 2 root root 208 Jul 1 18:41 edac drwxr-xr-x 2 root root 8 Jul 1 18:41 eisa drwxr-xr-x 2 root root 55 Jul 1 18:41 extcon drwxr-xr-x 2 root root 22 Jul 1 18:41 firewire
Now a 100pts question: "is it possible to rollback to an older snapshot?" The answer is: Yes
Going back in time to zpool_test/testfsds1@snap1
sounds as easy as what has just been demonstrated but with a nice side effect this time:
root #
zfs rollback zpool_test/testfsds1@snap1
cannot rollback to 'zpool_test/testfsds1@snap1': more recent snapshots or bookmarks exist use '-r' to force deletion of the following snapshots and bookmarks: zpool_test/testfsds1@snap2 zpool_test/testfsds1@snap3
ZFS is smart enough to warn about the effect of the operation: if the dataset is rolled-back in this case, zpool_test/testfsds1@snap2
and zpool_test/testfsds1@snap3
would make an absolute no sense thus they have to be destroyed. Going ahead:
root #
zfs rollback -r zpool_test/testfsds1@snap1
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.50G 432M 151K /zpool_test zpool_test/testfsds1 4.50G 432M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 0B - 4.50G -
Back to what things were at the beginning of the current section!
Last but not least, zpool_test/testfsds1@snap1
can be destroyed via the zfs destroy
command, just like a filesystem dataset or a zvolume can be:
root #
zfs destroy zpool_test/testfsds1@snap1
root #
zfs list
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.50G 432M 151K /zpool_test zpool_test/testfsds1 4.50G 432M 4.50G /zpool_test/testfsds1
If any subsequent snapshot would exists, ZFS will ask to explicitly put
-r
just like here-before in the example of rolling back to the first snapshot taken.Important considerations on ZFS snapshots
Further important considerations on snapshots before moving on:
- Working with zvolumes snapshots follows the exact same idea and will not be demonstrated here
- Before rolling a dataset back:
- ensure there are no open files on the corresponding filesystem dataset
- in a case of a zvolume, ensure it is unmounted first
- It is perfectly possible to destroy an intermediary snapshot, not only the latest one: in that case ZFS will determine what data blocks are no longer referenced in all remaining snapshots (and the corresponding filesystem dataset) then will free them up. The same zvolumes snapshots.
- Once a snapshot has been destroyed, there is no way to recover it but a
zfs send/receive
from a backup.
Do not delete intermediary snapshots if you have used
zfs send/receive
with the underlying dataset. ZFS will notice something is not correct on the receiving side and will simply refuse the transfer. There is a way to not break things with zfs send/receive
while being able to destroy no longer used snapshots on the sender side: bookmarks. More on them and that technique a bit later.ZFS clones
ZFS clones are the continuity of ZFS snapshots. In the ZFS world, a snapshot is an immutable object and it can only be read. There is a way, however, to get a writable snapshot: a ZFS clone.
Intuitively speaking, as a clone is a writable snapshot is derived from a snapshot. The way clone are created follows that idea!
First things first, recreate a snapshot of our test filesystem dataset used in the previous section dedicated to snapshots management as it has been destroyed at the end:
root #
zfs snap zpool_test/testfsds1@snap1
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.50G 432M 151K /zpool_test zpool_test/testfsds1 4.50G 432M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 0B - 4.50G -
Seeing a 0-byte snapshot should not be a novelty or a surprise at this point. It should also not be a surprise to read that a snapshot cannot be mounted (altough it can be accessed via the the pseudo=filesystem /zpool_test/testfsds1/.zfs/snapshot/snap1
) nor be modified:
root #
touch /zpool_test/testfsds1/.zfs/snapshot/snap1/helloworld
touch: cannot touch '/zpool_test/testfsds1/.zfs/snapshot/snap1/helloworld': Read-only file system
A clone of this latter snapshot can created with the following command:
root #
zfs clone zpool_test/testfsds1@snap1 zpool_test/testfsds1_clone
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.50G 432M 151K /zpool_test zpool_test/testfsds1 4.50G 432M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 163K - 4.50G - zpool_test/testfsds1_clone 0B 432M 4.50G /zpool_test/testfsds1_clone
Notice the slight size change of zpool_test/testfsds1@snap1
due to some additional metadata required for the clone creation and how the mountpoint has been defined. Nothing really new here.
Let's examine what has been created, here again not all of the properties will be commented:
root #
zfs get all zpool_test/testfsds1_clone
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT NAME PROPERTY VALUE SOURCE zpool_test/testfsds1_clone type filesystem - zpool_test/testfsds1_clone creation Sat Jul 1 20:44 2023 - zpool_test/testfsds1_clone used 0B - zpool_test/testfsds1_clone available 432M - zpool_test/testfsds1_clone referenced 4.50G - zpool_test/testfsds1_clone compressratio 1.00x - zpool_test/testfsds1_clone mounted yes - zpool_test/testfsds1_clone origin zpool_test/testfsds1@snap1 - (...)
If you first guess was to see clone
as the type you would be definitively wrong! Despite being what is is, a clone behaves in fact just like any regular filesystem dataset and it is considered as such by ZFS. So seeing filesystem
as being the type is perfectly normal.
So how a clone can be distinguished from a regular filesystem dataset then? The answer lies just under you eyes. Examine what is set for the property origin: it refers the snapshot the clone. As a comparison, notice what is set for origin in the case of zpool_test/testfsds1
:
root #
zfs get type,origin zpool_test/testfsds1
NAME PROPERTY VALUE SOURCE zpool_test/testfsds1 type filesystem - zpool_test/testfsds1 origin - - (...)
A dash! In other words: a big nothing.
While zpool_test/testfsds1
is a standalone filesystem dataset, there is parent/child relationship between zpool_test/testfsds1@snap1
and zpool_test/testfsds1_clone
. Because of this relationship exists, destroying zpool_test/testfsds1@snap1
or even zpool_test/testfsds1
is not possible unless destroying zpool_test/testfsds1_clone
(and all of its own eventual snapshots) as a prior operation.
The structure at this point can be summarized by the following diagram:
As the clone is writable, why not add some content to it?
root #
dd if=/dev/random of=/zpool_test/testfsds1_clone/test.dd bs=1M count=20
20+0 records in 20+0 records out 20971520 bytes (21 MB, 20 MiB) copied, 0.0316403 s, 663 MB/s
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.52G 412M 163K /zpool_test zpool_test/testfsds1 4.50G 412M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 163K - 4.50G - zpool_test/testfsds1_clone 20.2M 412M 4.52G /zpool_test/testfsds1_clone
Observe the size change of a (roughly) 20MB. Because the clone now lives its own (separate) life, the added data does not impact the size of the snapshot it derives from.
Time to destroy the snapshot the clone has been derived from:
root #
zfs destroy zpool_test/testfsds1@snap1
cannot destroy 'zpool_test/testfsds1@snap1': snapshot has dependent clones use '-R' to destroy the following datasets: zpool_test/testfsds1_clone
Because of the parent/child relationship between the clone and the filesystem dataset that latter derives from, ZFS is unable to delete the clone. Several options can be used to overcome that:
- Option #1: Break the relationship between the clone and its parent snapshot so each one exists as standalone ZFS entities. This requires to:
- make a backup by
zfs send
-ing a full copy ofzpool_test/testfsds1_clone
- destroy
zpool_test/testfsds1_clone
- restore
zpool_test/testfsds1_clone
from the backup previously made usingzfs receive
- make a backup by
- Option #2: Invert the parent/child relationship so
zpool_test/testfsds1_clone
becomes the parent ofzpool_test/testfsds1@snap1
The first option is of no interest here because it will duplicate the data blocks rather than just using references so let's use the second option and introduce a new ZFS command to manipulate clones by the same occasion: zfs promote
. That latter command does exactly what its name suggests: it promotes the clone as being the parent of what is originally derives from or in other words: "What was the child becomes the parent and what was the parent becomes the child".
root #
zfs promote
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.52G 412M 163K /zpool_test zpool_test/testfsds1 163K 412M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1_clone 4.52G 412M 4.52G /zpool_test/testfsds1_clone zpool_test/testfsds1_clone@snap1 174K - 4.50G -
Noticed the changes? Everything has been turned upside-down and becomes just like the zpool_test/testfsds1_clone
had been created first, then snapshotted as zpool_test/testfsds1_clone@snap1
then cloned as zpool_test/testfsds1
. To illustrate things again, here is now how things are organized:
- The clone
zpool_test/testfsds1_clone
now assumes the responsibility ofzpool_test/testfsds1
so it now has a size of 4.50GB (the original size ofzpool_test/testfsds1
) plus the additional 20MB added just here-before for a grand total of 4.52GB - The snapshot
zpool_test/testfsds1@snap1
has "migrated" fromzpool_test/testfsds1
tozpool_test/testfsds1_clone
and also became the parent ofzpool_test/testfsds1
.
root #
zfs get type,origin zpool_test/testfsds1_clone zpool_test/testfsds1 zpool_test/testfsds1_clone@snap1
NAME PROPERTY VALUE SOURCE zpool_test/testfsds1 type filesystem - zpool_test/testfsds1 origin zpool_test/testfsds1_clone@snap1 - zpool_test/testfsds1_clone type filesystem - zpool_test/testfsds1_clone origin - - zpool_test/testfsds1_clone@snap1 type snapshot - zpool_test/testfsds1_clone@snap1 origin - -
That can also be illustrated by the following diagram:
Despite a hierarchy change due to the clone promotion, what all of those entities remains strictly the same. Even those both ZFS entities conserve a link in-between they now live their own lives and both can have their own snapshots.
Just for the sake of the demonstration: what happens if /zpool_test/testfsds1_clone/test.dd is deleted? To find out, let's take a another snapshot of zpool_test/testfsds1_clone
then proceed with the file deletion:
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.52G 412M 163K /zpool_test zpool_test/testfsds1 163K 412M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1_clone 4.52G 412M 4.52G /zpool_test/testfsds1_clone zpool_test/testfsds1_clone@snap1 174K - 4.50G - zpool_test/testfsds1_clone@snap2 0B - 4.52G -
The explanation is somewhat tricky but here it is: because /zpool_test/testfsds1_clone/test.dd is still referenced in zpool_test/testfsds1_clone@snap2
, its data blocks are still retained (hence the 4.52GB seen by that latter snapshot). Remember we have put the world upside-down and in zpool_test/testfsds1_clone@snap1 (which is the old zpool_test/testfsds1@snap1), /zpool_test/testfsds1_clone/test.dd does not exists hence the 4.50GB shown. The way the demonstration has been done makes the contents of zpool_test/testfsds1
a subset of zpool_test/testfsds1_clone
so ZFS only needs a couple of metadata to establish the contents of each entity.
Another 100pts question: "is it possible to revert to the original state?" (or reworded: "can zpool_test/testfsds1
be promoted?"). Let's find out, but as a first step, rollback and destroy zpool_test/testfsds1_clone@snap2
:
root #
zfs rollback zpool_test/testfsds1_clone@snap2
root #
zfs destroy zpool_test/testfsds1_clone@snap2
root #
zfs promote zpool_test/testfsds1
root #
zfs list -t all
NAME USED AVAIL REFER MOUNTPOINT zpool_test 4.52G 412M 163K /zpool_test zpool_test/testfsds1 4.50G 412M 4.50G /zpool_test/testfsds1 zpool_test/testfsds1@snap1 163K - 4.50G - zpool_test/testfsds1_clone 20.2M 412M 4.52G /zpool_test/testfsds1_clone
Et voila! Back to the original state! Notice who is the parent of who:
root #
zfs get type,origin zpool_test/testfsds1_clone zpool_test/testfsds1 zpool_test/testfsds1@snap1
root #
zfs list -t all
NAME PROPERTY VALUE SOURCE zpool_test/testfsds1 type filesystem - zpool_test/testfsds1 origin - - zpool_test/testfsds1@snap1 type snapshot - zpool_test/testfsds1@snap1 origin - - zpool_test/testfsds1_clone type filesystem - zpool_test/testfsds1_clone origin zpool_test/testfsds1@snap1 -
A typical usage of snapshots in a Gentoo environment is to experiment "What if I would do this?": just clone the production environment filesystem dataset, then mount what is required to be (as if the clone was an uncompressed Gentoo stage 3 tarball) then chroot into it to have a breakable playground. Cloning also avoids copying back and forth hundreds of gigabytes of data and filling up the local disk space (ZFS, so far, will duplicate all data blocks if a simple copy rather than a clone would have been made). ZFS deduplication being not of common use due to induced performance penalties.
As being a filesystem dataset, the clone can be destroyed with a now known command:
root #
zfs destroy zpool_test/testfsds1_clone
Maintenance
Scrubbing
To start a scrub for the zpool zfs_test:
root #
zpool scrub zfs_test
This might take some time and is quite I/O intensive. ZFS attempts to minimize the impact on the wider system, but sometimes systems don't handle even lowest priority IO that well.
Monitor I/O
Monitor I/O activity on all zpools (refreshes every 6 seconds):
root #
zpool iostat 6
Technical details
ARC
OpenZFS uses ARC page replacement algorithm instead of the Last Recently Used page replacement algorithm used by other filesystems. This has a better hit rate, therefore providing better performance. The implementation of ARC in ZFS differs from the original paper in that the amount of memory used as cache can vary. This permits memory used by ARC to be reclaimed when the system is under memory pressure (via the kernel's shrinker mechanism) and grow when the system has memory to spare. The minimum and maximum amount of memory allocated to ARC varies based on your system memory. The default minimum is 1/32 of all memory, or 64MB, whichever is more. The default maximum is the larger of 1/2 of system memory or 64MB.
The manner in which Linux accounts for memory used by ARC differs from memory used by the page cache. Specifically, memory used by ARC is included under "used" rather than "cached" in the output used by the `free` program. This in no way prevents the memory from being released when the system is low on memory. However, it can give the impression that ARC (and by extension ZFS) will use all of system memory if given the opportunity.
Adjusting ARC memory usage
The minimum and maximum memory usage of ARC is tunable via zfs_arc_min and zfs_arc_max respectively. These properties can be set any of three ways. The first is at runtime (new in 0.6.2):
root #
echo 536870912 >> /sys/module/zfs/parameters/zfs_arc_max
This sysfs value became writable in ZFSOnLinux 0.6.2. Changes through sysfs do not persist across boots. Also, the value in sysfs will be 0 when this value has not been manually configured. The current setting can be viewed by looking at c_max in /proc/spl/kstat/zfs/arcstats
The second is via /etc/modprobe.d/zfs.conf:
root #
echo "options zfs zfs_arc_max=536870912" >> /etc/modprobe.d/zfs.conf
If using genkernel to load ZFS, this value must be set before genkernel is run to ensure that the file is copied into the initramfs.
The third is on the kernel command line by specifying "zfs.zfs_arc_max=536870912" (for 512MB). Similarly, the same can be done to adjust zfs_arc_min.
ZFS root
To boot from a ZFS filesystem as the root filesystem requires a ZFS capable kernel and an initial ramdisk (initramfs) which has the ZFS userspace utilities. The easiest way to set this up is as follows.
Bootloader
GRUB should be compiled with libzfs USE-flag in order to boot system from ZFS dataset:
root #
echo "sys-boot/grub libzfs" > /etc/portage/package.use/grub
root #
emerge -av grub
Preparing disk
While recent versions of GRUB can boot itself from ZFS pool (i.e. when /boot resides on ZFS), it has some serious limitations on maintaining ZFS itself. Additionally it's not recommended to place swap partition in ZFS as this can leads to deadlocks[4]. Overall, default partition scheme from Handbook (boot and swap partitions, rest space for zpool) is recommended:
Partition | Description | Filesystem |
---|---|---|
/dev/sda1 | EFI system (and boot) partition | FAT32 |
/dev/sda2 | swap partition | swap |
/dev/sda3 | ZFS | space for root ZFS pool |
Follow Handbook's instructions to create it. After preparing disk, format boot and enable swap partitions, and then create ZFS root dataset. OpenZFS recommends use unique storage identifier (WWN) instead of using system device names. WWN can be obtained by running lsblk -o name,wwn:
root #
lsblk -o name,wwn
NAME WWN sda 0x50014ee2b3b4d492 ├─sda1 0x50014ee2b3b4d492 ├─sda2 0x50014ee2b3b4d492 ├─sda3 0x50014ee2b3b4d492
WWN exists only for SATA/SAS drives, NVMe devices have different naming like eui.6479a776500000b8.
Full name of /dev/sda3 will be /dev/disks/by-id/wwn-0x50014ee2b3b4d492-part3. Create ZFS pool named rpool:
root #
zpool create -o ashift=12 -o autotrim=on -O acltype=posixacl -O xattr=sa -O dnodesize=auto -O compression=lz4 -O normalization=formD -O relatime=on -O canmount=off -O mountpoint=/ -R /mnt/gentoo rpool /dev/disks/by-id/wwn-0x50014ee2b3b4d492-part3
Meaning of parameters described in OpenZFS documentation.
Now create ZFS datasets:
root #
zfs create -o canmount=off -o mountpoint=none rpool/ROOT
root #
zfs create -o canmount=noauto -o mountpoint=/ rpool/ROOT/gentoo
root #
zfs mount rpool/ROOT/gentoo
Now let's create some optional datasets (in this example - for /home and /var/log:
root #
zfs create rpool/home
root #
zfs create -o canmount=off rpool/var
root #
zfs create rpool/var/log
root #
...
ZFS setup is ready, new root for now resides in /mnt/gentoo. Last thing is copy zpool.cache:
root #
mkdir /mnt/gentoo/etc/zfs -p
root #
cp /etc/zfs/zpool.cache /mnt/gentoo/etc/zfs/
For new systems, follow Gentoo Handbook installation instructions up to Linux kernel configuration. Next chapter will provide additional configurations required for kernel.
Configuring kernel
Distribution Kernel
After chrooting into new root prepare a Distribution Kernel.
# Install an initramfs
sys-kernel/gentoo-kernel initramfs
# Ensure ZFS gets rebuilt when the kernel is upgraded
sys-fs/zfs-kmod dist-kernel
Install the kernel:
root #
emerge --ask sys-kernel/gentoo-kernel
Dracut will automatically detects ZFS on rootfs and enable additional modules into initramfs.
Genkernel
After chrooting into new root for genkernel to embed /etc/hostid into the initrd later, we need to generate /etc/hostid if it's not existing:
root #
zgenhostid
Enable ZFS="yes"
in /etc/genkernel.conf:
# ...
# Include support for zfs volume management. If unset, genkernel will attempt
# to autodetect and enable this when rootfs is on zfs.
ZFS="yes"
# ...
After that regenerate initramfs (and compile kernel itself):
root #
genkernel all
Configure GRUB to use ZFS, and which dataset to boot from:
GRUB_CMDLINE_LINUX="dozfs root=ZFS=rpool/ROOT/gentoo"
Finally, create the grub.cfg:
root #
grub-mkconfig -o /boot/grub/grub.cfg
Finalizing installation
Don't forget to add zfs-import and zfs-mount services to boot runlevel:
root #
rc-update add zfs-import boot
root #
rc-update add zfs-mount boot
Caveats
- Encryption: Native encryption (i.e. not using LUKS) has a history of show-stopper bugs in ZFS. There is (as of July 2023) no active maintainer for the encryption portions of ZFS and it's unofficially discouraged by the community. Some example bugs are:
- https://github.com/openzfs/zfs/issues/6793
- https://github.com/openzfs/zfs/issues/11688
- https://github.com/openzfs/zfs/issues/12014
- https://github.com/openzfs/zfs/issues/12732
- https://github.com/openzfs/zfs/issues/13445
- https://github.com/openzfs/zfs/issues/13709
- https://github.com/openzfs/zfs/issues/14166
- https://github.com/openzfs/zfs/issues/14245
- Swap: On systems with extremely high memory pressure, using a zvol for swap can result in lockup, regardless of how much swap is still available. This issue is currently being investigated in [1]. Please check the current OpenZFS documentation on swap"
See also
- ZFS/rootfs — using ZFS as the rootfs
- Btrfs — a copy-on-write (CoW) filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, self-healing properties, and easy administration.
External resources
- ZFS on Linux
- OpenZFS
- ZFS Best Practices Guide (archive)
- ZFS Evil Tuning Guide
- article about ZFS on Linux/Gentoo (german)
- ZFS Administration