The goal of this guide is to provide you with a smooth migration from GRUB Legacy to GRUB2.
Grub is one of the most commonly found boot loaders in use on non-embedded Linux machines. The role of Grub is to facilitate the Linux kernel being loaded from your disk into memory and start executing the Linux kernel.
So Why Migrate?
Firstly, GRUB Legacy is no longer maintained and as such no longer receives updates. GRUB Legacy was created at a time when the developers felt safe in making several assumptions which no longer hold true today. For example, GRUB Legacy is unable to boot from disks larger than 2TB and assumes that newer filesystems wouldn't come to replace /boot .
GRUB2 aims to be more robust, more portable, more powerful and is maintained with a cleaner code base. GRUB2 supports more hardware configurations, more filesystems and more drive layouts than its predecessor.
Migration to GRUB2
Migration to GRUB2 is fairly straightforward: it will be pulled in as part of your regular upgrade process by your package manager. If it is not pulled in automatically, you can always install
The first important part is to understand what your bootable drive is. For many people it will be /dev/sda . The easiest way to find this is to look at how your existing GRUB Legacy is setup by viewing /boot/grub/grub.conf. An example one is provided below.
Based on the above file we know that
(hd0) is the boot drive but we must map this to a real device. To know this you must view /boot/grub/device.map . An example one is provided below.
Based on the above file we know that /dev/sda is the boot drive.
Installing and Configuring GRUB2
The next step is to install and configure GRUB2 on your /boot partition without removing GRUB Legacy from your MBR. The example below uses /dev/sda but you must replace it with your boot drive path. The first step installs the necessary GRUB2 files to /boot/grub , while the second step scans your available kernels and generates a suitable config file to /boot/grub/grub.cfg . Skip the second step when using a Manual Configuration.
Chainloading GRUB2 from GRUB Legacy to test the setup
Because a broken GRUB configuration could mean an unbootable system, we want to test our GRUB2 configuration before making it permanent. To do this we will chainload GRUB2 from GRUB Legacy. This is done by adding a new section into /boot/grub/grub.conf . An example is shown below.
At this point you should reboot your machine and select
GRUB2 Chainload from the GRUB menu when your machine begins to boot. You will be presented with another GRUB menu which should advertise itself as GRUB 2.0.0 or higher at the top and show your available kernel(s) to boot. Should this not work, simply reboot your system and pick your normal boot option instead of
GRUB2 Chainload .
Replacing and removing GRUB Legacy
At this point, if everything worked successfully, you can replace GRUB Legacy and remove it from your system.
At this point you can use your package manager to remove
The migration is complete.
Whenever you install a new kernel, you must perform the next step so that your GRUB2 configuration recognizes the new kernel (unless you are using a manual configuration).
We would like to thank the following authors and editors for their contributions to this guide: